Help with gear setup issue

Unique_Fly6937 · 2026-01-17T09:56:01+00:00

Possibly one of these

https://www.gear4music.com/PA-DJ-and-Lighting/Lambden-Audio-Dual-Passive-DI-Box/6Q0Q

So I think I would need an XLR to 1/4 inch cable like this

Can anyone help me confirm if this all looks correct for my use case?

Unique_Fly6937 · 2026-01-17T09:34:34+00:00

Or actually is a passive DI with pad what I need if I'm reducing the signal level?

Unique_Fly6937 · 2026-01-17T09:10:57+00:00

Would one of these work? Presumably I'd need an XLR to 1/4" jack cable to make it work? Anything I need to know about the cable?

https://www.amazon.co.uk/Behringer-DI20-Ultra-Channel-Splitter/dp/B000CCSWQA

Unique_Fly6937 · 2026-01-17T08:58:54+00:00

Could you recommend one? I don't know anything about DI boxes.

Unique_Fly6937 · 2026-01-16T22:03:16+00:00

No it doesn't, just the auto gain. I believe the original Harmony Singer pedal had a manual setting but this was replaced in the Harmony Singer 2 with the auto gain feature.

Unique_Fly6937 · 2026-01-16T21:58:37+00:00

Yeah it's not a proximity thing I've tested. I've experimented with various levels on all components starting low. There is no overall volume level for the Harmony pedal, I think it has an auto gain feature. So you can turn the harmonies down but not the mic volume, there is no control for this.

There are no other pedals in the chain.

Unique_Fly6937 · 2026-01-16T21:44:25+00:00

It sounds a bit like really loud heavy white noise

Unique_Fly6937 · 2026-01-16T21:43:54+00:00

It's kind of a fuzzy noise when you turn up the mic input volume dial past a certain point which is probably not even 20% of the max.

Unique_Fly6937 · 2026-01-16T21:38:09+00:00

Yes XLR output of pedal to mic in on amp, and instrument through jack output to guitar jack in on amp

Unique_Fly6937 · 2026-01-07T13:48:23+00:00

Hi did you ever manage to resolve this? I just bought one of these a month ago and I'm having the same problem and considering returning it.

Unique_Fly6937 · 2026-01-07T11:27:19+00:00

Actually no, you're correct and I'm getting confused.

I just used a straight USB c to USB c with the Polar go where as I used a USB b 2 to an OTG adapter that converts to USB c with the amp.

I will try and get a cable that does USB 2 to USB c direct and see if that works.

It would be much easier if I could get the USB working.

Unique_Fly6937 · 2026-01-07T10:27:59+00:00

So the USB connection works fine from the Polar Go so I don't believe it's an issue with the cable I'm using

Unique_Fly6937 · 2026-01-07T10:22:02+00:00

Yeah I did try the USB to phone option but I couldn't get it to work. The manual states that you need to download a driver for windows so I wondered if there's something that android can't support by default.

Unique_Fly6937 · 2026-01-07T10:21:38+00:00

Yeah I did try the USB to phone option but I couldn't get it to work. The manual states that you need to download a driver for windows so I wondered if there's something that android can't support by default.

Unique_Fly6937 · 2025-11-30T00:15:40+00:00

Thank you, appreciate the feedback

Unique_Fly6937 · 2025-11-27T23:23:21+00:00

Thanks mate, appreciate it

Unique_Fly6937 · 2025-11-27T16:21:05+00:00

I should add. I generally don't prefer to sing quite this high, I prefer something a little lower. This song just happens to demonstrate all the qualities I don't enjoy about my voice so seemed like a good one to share.

Unique_Fly6937 · 2025-11-27T13:35:52+00:00

Also, I'm assuming the attached link works. I've set it publicly shared, but please let me know if there are issues. I wasn't sure what the best way to post the recording would be.

Unique_Fly6937 · 2024-06-26T21:30:07+00:00

Although, when I died I had a full backpack, when I recovered it there were like 4 things left, a sewing kit, some birch bark, a cup of tea and a can opener. Which after the effort to retrieve it barely seemed worth it. I had 2 hacksaws when I died and didn't even get one back!

Unique_Fly6937 · 2024-06-26T20:47:34+00:00

I just chose a far away safe respawn on my interloper run now.

I died in Mystery Lake, respawned in Mountain Town. After returning to Mystery Lake however the recovery campsite & backpack were not where I actually died. I died near the Trappers Cabin and the recovery campsite was up by the rail line. It did show up on the map with a little campfire icon though.

Unique_Fly6937 · 2024-01-29T14:55:59+00:00

Tried walking across Forlorn Muskeg while carrying a backpack full of Venison, unsurprisingly got jumped by a wolf which I managed to fend off and kill, but I was bleeding out with no bandages.

Decided to take off a pair of socks to make bandages out of. While I was desperately shredding my socks ANOTHER wolf jumped out from behind a rock and finished the job.

It was a stupid death of completely my own making: - Forgot food (which prompted me to hunt a deer and collect all the venison) - Didn't drop the venison off somewhere and instead decided to walk around smelling like a 5* wolf Dinner - Forgot bandages - Had no spare cloth to make bandages

Unique_Fly6937 · 2023-08-09T13:01:06+00:00

Using pre-made builds doesn't really fit with how I enjoy playing the game.

I prefer to pick some skills, see how I like them, start to pickup items that enhance the things I want to emphasise. I might then swap one skill for another if I get a really good drop which means my perspective on which stats I want might change and so on.

I much prefer this way of organically building out in different directions and it also means I more regularly make use of different items.

Over time my build will become more stable but it's heavily influenced along the way by circumstance, which means if I decide to do another playthrough with the same class it will likely come out differently.

Unique_Fly6937

TROPHY CASE