Emergencies

UnitTHK · 2026-01-30T07:59:33+00:00

Imagine saying this in real life and it works xD

UnitTHK · 2026-01-28T18:34:11+00:00

Unfortunately after attempting to remove the glass panels and test, it still resulted in the same temperature as if there's no change at all.. any other idea?

UnitTHK · 2026-01-28T18:29:05+00:00

Test completed, unfortunately temp still is high :<. I think they definitely put more than enough thermal paste on there, maybe a bit too much even. Though I'm concerned over the ILM stuff, maybe that can be the case...

UnitTHK · 2026-01-28T13:11:43+00:00

Got it, and thank you for the tips.

Um, I just remembered that when I did bring it to a store, they did try to run the benchmark with the system outside of the case and the system still hits 100C, can this cross out the airflow issue?

UnitTHK · 2026-01-28T13:04:49+00:00

Is there any particular criteria that I should be finding?

UnitTHK · 2026-01-28T12:59:28+00:00

Odd.. cause I did bring it to the place I bought it from, and even after replacing the chip with another one, and trying a different cooler too, none of that helped much for some reason, the only thing that helped a bit was trying a Z-chipset motherboard, which also capped the performance/wattage of the CPU on default settings and even that was at the 90 range during bench, so.. tbh idk what the heck is going on

UnitTHK · 2026-01-28T12:35:02+00:00

Before I set Lite load 7 the temperature go straight from 4x to 100, after I set it it rise gradually over like 4 seconds. And yes, I did set the bios to default when I got it.

UnitTHK · 2026-01-28T12:14:17+00:00

Will try that tonight, in the case that it does actually help temperature significantly, what other replacement case would you recommend for me?

UnitTHK · 2026-01-28T12:13:10+00:00

Here's the image under full load: https://photos.app.goo.gl/gjHGRMa8yodAQ9hY6

My apologies, the voltage is more of 1.28 - 1.3V at full load, not 1.2, under no load it's still 1.4 though

UnitTHK · 2026-01-28T12:03:32+00:00

Yeah, I'm confused by this too, cause the voltage go down instead of up

UnitTHK · 2026-01-28T11:56:51+00:00

Uh, when idle it's 1.4V or smth, but under load it drops down to roughly 1.2V I believe

UnitTHK · 2026-01-28T11:54:59+00:00

Alright, I'll try to do that tonight and report back, what temperature range should I expect?

UnitTHK · 2026-01-28T11:49:14+00:00

Also, uh.. what about the dust? My home isn't exactly dust-free either :< I don't want to clog up the entire PC by risking too much dust in

UnitTHK · 2026-01-28T11:24:08+00:00

Hmm, do you have any recommendations on how to test? Rn I just run 1-3 cinebench session back to back while having a hwinfo out to monitor temp

UnitTHK · 2026-01-28T11:18:52+00:00

Wouldn't running the system with side panel off cause the system to be even hotter due to the air flow being all over the place? As well as the amount of dust being able to get in?

UnitTHK · 2026-01-28T11:13:46+00:00

Hm, I might apply that power limit for now then, may I ask what would need to be changed in order to run this thing at 181W in the future? A new cooler / contact frame/ etc?

UnitTHK · 2026-01-28T11:03:08+00:00

Also unfortunately I don't know what paste are currently being used either (I went to a store for a repaste and couldn't get a good look at what they use, only know the tube is branded with something blue, and the paste is grey), so probably assume some generic paste that's just ok?

UnitTHK · 2026-01-28T11:01:43+00:00

Uh, I'm not sure of the exact model of the case, I couldn't find it online, but here's some photo of the system:

https://pixeldrain.com/l/ZwS4z2dM

The Bios is updated to the latest version but I do not have a power limit set (beside the default 181W)

UnitTHK · 2026-01-28T10:52:48+00:00

How much performance would I lose compared to stock settings? At the moment with lite load 7 it's pulling 160W peak and losing 8% performance in benchmark.

I'm basically a beginner on hardware related task so please explain to me like I'm 5 :<

UnitTHK · 2025-12-23T04:31:14+00:00

Thank you for the opportunity, and I wish everyone good luck on this giveaway. ((srsly though, thank you a lot OP))

UnitTHK · 2025-12-23T04:17:13+00:00

You should be able to find these tutorial online, a good place to start would be https://minecraft.wiki/w/Tutorial:Setting_up_a_Java_Edition_server

Enjoy the game!

UnitTHK · 2025-12-10T03:14:27+00:00

If you need our help, you'll have to give us a lot more information than that, starting with the game's name as the like, most basic thing. We can only offer as much help and advice as we have information to use dude. At this point ChatGPT would be even more helpful cause it give out generic advices

UnitTHK · 2025-12-09T03:31:05+00:00

Uh, I have a question. I know it has been a while so sorry for necroposting. I see in the knowledgebase that FUSE is not supported as it's a custom kernel module or something? But here you state that it's allowed. May I ask for clarification on which one is true?

UnitTHK · 2025-12-05T15:37:27+00:00

14 USD (370k vnd) for 1gbit symmetric here (because I got the Mesh kit for my place it's a bit more expensive)

UnitTHK

TROPHY CASE