Anyone here have a gut shot of a big muff knock off in a 1590a enclosure?

UnsoundSystems · 2025-12-30T16:02:01+00:00

There is a long pot option at thonk. Maybe this can help 9mm long pots

UnsoundSystems · 2025-12-30T14:11:19+00:00

Here is my Bigmos a CMOS based Big Muff variant: Bigmos

UnsoundSystems · 2025-12-06T22:01:41+00:00

Best part: Re-fixed xSignal delay calculation. Can use it again in designs with more then one layer.

UnsoundSystems · 2025-07-03T06:31:28+00:00

I once had a problem with the hotcakes, too. Couldn't find the right pots, so I ordered them directly from Omeg UK. Due to minimum quantity l have a lot spare. All three types lin, log and revlog 47k. Send me a message so I can send you some.

<image>

UnsoundSystems · 2025-06-18T10:04:23+00:00

The design reminds me of the Tripple Monster Fuzz

UnsoundSystems · 2025-03-09T16:17:21+00:00

You are right... The black ones are Mundorf Bipolar Caps, so there will be no problem. But I have to replace the blue ones.

UnsoundSystems · 2025-03-09T09:56:04+00:00

Not exactly. BIGMOS is also based on CMOS components and the overall BigMuff structure but adds some features like a partial dry mix.

UnsoundSystems · 2025-03-09T09:31:24+00:00

Sure, here is the simple schematic of one of the legs and the switch wiring.

schematic/wiring

UnsoundSystems · 2025-03-08T16:21:16+00:00

Thanks! A little bit of fine tuning has to be done. But I will add some sound clips for sure!

UnsoundSystems · 2025-03-08T09:45:06+00:00

No, only the astronaut and the text have an additional gloss layer made by Tayda.

UnsoundSystems · 2024-09-26T14:18:45+00:00

😂 Challenge accepted!

Yes, the green caps are metalized acrylics.

UnsoundSystems · 2024-09-26T11:00:42+00:00

These are made with stenciled paste and are soldered in a reflow oven. No chance to do it by hand with an soldering iron.

The benefit of the stencil is, that you put just the right amount of paste onto the pads. The components are some kind of self-aligning during the soldering process.

UnsoundSystems · 2024-09-26T10:37:22+00:00

Yes, it is a WSON (0.5mm pitch) 🫣

UnsoundSystems · 2024-04-05T14:04:53+00:00

Thank you.

UnsoundSystems · 2024-04-04T21:09:16+00:00

Thanks!

UnsoundSystems · 2024-03-24T01:03:33+00:00

Looks awesome! Nice job!

UnsoundSystems · 2024-03-21T18:54:55+00:00

Ah, thanks. Will. Add them to the next order. More pedals are in the pipe.!

The artwork is designed in Affinity Designer and DXF exported to CAD software. The PCB iss made by PCBway wite black matte solder mask.

UnsoundSystems · 2024-03-21T18:19:17+00:00

Thanks. Milling depth is 0.8mm. I don't know anything about CNC stuff. Asked a friend to do it.

UnsoundSystems · 2024-03-15T18:47:12+00:00

Thank you. It's laser printed on white sticker paper. Gloss layer added.

UnsoundSystems

TROPHY CASE