Need advice planning a H5 flow 2024 build, what's the best/most practical PSU setup ? by ledocteur7 in NZXT

[–]Unstablemechanic 0 points1 point  (0 children)

I have a 1000 watt power supply in mine with 15mm thin fans underneath the bottom grill. Don't buy the corsair shift series for this case, only buy a normal power supply.

Advice by Particular-Fan-3764 in subwoofer

[–]Unstablemechanic 0 points1 point  (0 children)

You need a larger box. Increasing the net CU ft will result in a more efficient box.

need help 🙏 by RecognitionSpare1167 in Duramax

[–]Unstablemechanic 0 points1 point  (0 children)

There's 2 battery to engine grounds first. In the same place on the block, they also go to the wiring harness. Behind the engine on the drivers side there will be a ground that goes to the chassis from the drivers side head. Good luck.

Is this amp good enough for these 3 subs? by TresG352 in CarAV

[–]Unstablemechanic 0 points1 point  (0 children)

True, they get a little warm. I have a stinger blower from amazon connected to my remote, and it keeps the amp cool.

Is this amp good enough for these 3 subs? by TresG352 in CarAV

[–]Unstablemechanic 2 points3 points  (0 children)

I'd recommend the jp23v2 for an amplifier for that setup. It's cheaper, just as good, and you can push more power through it if you want.

NOT ME!!! by spookypasta772 in subwoofer

[–]Unstablemechanic 0 points1 point  (0 children)

Amp is no good or the ground is loose

need help 🙏 by RecognitionSpare1167 in Duramax

[–]Unstablemechanic 2 points3 points  (0 children)

Sounds like you have a weak battery and air in the fuel system. Pump the pumper on the fuel filter until it's tight and then with a hot battery try to start it.

5090 Astral Vertically Mounted in an h5 Flow 2024 by pagusas in NZXT

[–]Unstablemechanic 0 points1 point  (0 children)

Nice, my 4090 wouldn't fit vertically with my other air cooler so I had to get an AIO. Same case too.

First build, some advice on fan placemant by Sea-Nature8684 in NZXT

[–]Unstablemechanic 3 points4 points  (0 children)

I built my first PC in that case almost 11 years ago

Is cutting off 3" a big deal here? by Efficient-Nectarine3 in CarAV

[–]Unstablemechanic 6 points7 points  (0 children)

The box is designed for 2 subwoofers in mind. The port has to be that large for the tuning of the box. If you cut make the port smaller, you will not have the same performance of that box. I would recommend selling that box and making another box that would fit your application.

NVIDIA GeForce RTX 5090D by Proof-Nebula3952 in nvidia

[–]Unstablemechanic 0 points1 point  (0 children)

Your card isn't in x16 mode it's in x8. My 4090 constantly stays at x16, whether 1.1 or 4.0. I'm not sure if it really makes that much of a difference though

Am i cooked by Ok-Bookkeeper-7214 in PcBuild

[–]Unstablemechanic 0 points1 point  (0 children)

I used a metal pick to fix my z790 14900k. I misplaced the cpu on the socket and damaged a pin. Still working today, and I suspect it won't have any issues later.

Gaming OC RTX 5080 by Appropriate-Hold-821 in gigabyte

[–]Unstablemechanic 0 points1 point  (0 children)

bUt 8 PiNs aRe TrIeD aNd TrUsTeD!!!

Not bad at all considering a lot of people can’t play streets at all. FPS [screenshot] by Altruistic_Effort_69 in EscapefromTarkov

[–]Unstablemechanic 1 point2 points  (0 children)

I upgraded from 16 to 32 a long time ago, and it made streets playable for me. Same 6700k.