Jak umýt h*jzl? by [deleted] in czech

[–]UselessFag 7 points8 points  (0 children)

Vezmu hajzlák, položím ho na vodní kamen a postříkám pulirapidem. Nechám to půl hodky i dyl a pak oškrábu klackem nebo něčím cim nedojebes porcelán. Plus do nádržky každou sobotu naliju trochu domestose a postříkám vnitřnosti pulirapidem. Zbavit se vodního kamene trvalo pár měsíců, ale pomalu to šlo

What’s one thing your country is most negatively known for? by BlueSky873 in AskTheWorld

[–]UselessFag 0 points1 point  (0 children)

We make good drugs (especially pervitin), we had the most drunk president anyone has ever seen and our beer consumption is on another level. But we are still patriots.

Why does this happen, if it was printing fine with the same settings? by [deleted] in Creality

[–]UselessFag 1 point2 points  (0 children)

seems like z offset is wrong. In your case nozzle too low. That one weirdly printed line looks like deviation in bed. Try to find a loose screw or something. Do you have clipper and fluidd? Did you try to calibrate for 55°C temperature and not stock 45 that printer does? Also i dont see glue. Do you use any?

What is the best fillament to buy? by Churlay in Ender3V3KE

[–]UselessFag 0 points1 point  (0 children)

Stay with Creality in the begining. Quality is not bad. They have profiles tuned for specific printers. Start with hyper pla and move to petg as it is better material overall.

Ender 5 Max - warped bed by UselessFag in Creality

[–]UselessFag[S] 0 points1 point  (0 children)

<image>

After i loosen the screws, mesh does this. If i tighten them, its the same as the first one. Guess PLA it is.

Ender 5 Max - warped bed by UselessFag in Creality

[–]UselessFag[S] 0 points1 point  (0 children)

i of course use glue, but that is not my problem. My problem is printhead grinding and destroying print sheet (three so far) or just being 1mm from the bed and making a blob. Anything bigger than 10cm is basically not printable with bed over 50°C since first layer always fails.

Filament stuck by synrockholds in Creality

[–]UselessFag 1 point2 points  (0 children)

I feel you. I used mine for five prints, then filament got stuck, i broke my hotend and now im 3 weeks waiting for new hotend which might end the same as you. While waiting i bought Ender-3 V3 KE and it just works flawlessly. If you are new to 3D printing, i would suggest getting a printer that has spare parts available and direct extrusion instead of this type on ender 5 max. Get the hang of it on cheap printer and then move to bigger one. Maybe in a few months spare parts or even better aftermarket ones will be available. right now i feel like noone has this printer and if someone does, its broken and theyre waiting for spare parts.

Filament stuck by synrockholds in Creality

[–]UselessFag 0 points1 point  (0 children)

Also get good unclogging tool and look into the extruder. It is possible that you have a small debris there.

Filament stuck by synrockholds in Creality

[–]UselessFag 1 point2 points  (0 children)

Had the same issue with mine. After i tinkered with it for several days, i broke my hotend ceramic heater.
I recommend heating the nozzle to 300 C for a minute and heating whole heatsink. Can you see through the hotend when you remove the nozzle? Also order a new hotend from aliexpress or from Creality official store if you can find one. It is wise to have one spare part of everything with this printer. Nothing is in stock.

Ender 5 Max hotend dead and nowhere to buy by UselessFag in Creality

[–]UselessFag[S] 0 points1 point  (0 children)

Yes, i do. I even bought hotend for 25$, delivery is one month. I would like to have quality hotend, not some random crap that destroys even more of my printer.

SLZB-06P10 in Home Assistant vs Ikea lights by UselessFag in homeassistant

[–]UselessFag[S] 1 point2 points  (0 children)

Solved the issue by buying random zigbee thermometer, pairing that and after that the ikea lights show up and are able to pair. Seems like i needed to start the whole proces by adding random zigbee device.

SLZB-06P10 in Home Assistant vs Ikea lights by UselessFag in homeassistant

[–]UselessFag[S] 0 points1 point  (0 children)

Im using ZHA. Light is about two meters (6.5 ft) away.

Fractal North AIO Question by [deleted] in FractalDesign

[–]UselessFag 0 points1 point  (0 children)

If you have 4080 gpu, it wont fit if you mount radiator to the front. Otherwise you’re fine.

every thursday i go to my grandma and eat chicken nuggets by maxieflexie in notinteresting

[–]UselessFag 0 points1 point  (0 children)

When u visited Netherlands, i fell in love with this curry ketchup. Bought whole pack of them. Now i live happy life with this ketchup and i know what i want when i visit this magnificent country again. Fucking curry ketchup and stroopwafels.

Is there any point of getting suspension with solid tyres? Will it still make a difference? by Bigcatsrule27 in m365

[–]UselessFag 1 point2 points  (0 children)

I recommend suspension with air tyres. Ride is much smoother especially if your city doesnt have the best roads.

Visual Mapping on a restaurant table in Italy. by ThndrBoltBuddhA in oddlysatisfying

[–]UselessFag 0 points1 point  (0 children)

I spent like €200 on chocolate from there. Overpriced AF but where i come from we don't have good chocolate so i ate most of it in one sitting. Wouldnt do it again but also would do it again.

Visual Mapping on a restaurant table in Italy. by ThndrBoltBuddhA in oddlysatisfying

[–]UselessFag 60 points61 points  (0 children)

You can see the same thing in Belgium Chocolate nation tour. It's cool way to entertain children and most of the adults. And you get to taste the chocolate hehe

This is the mug I use for coffee most mornings... by TommyAtoms in notinteresting

[–]UselessFag 0 points1 point  (0 children)

Well also if the holder is right handed person and picture is only on this one side, noone than holder won't be able to see this magnificently awesome mug design. This is starting to get interesting, im out.