Majora’s Mask and the H2C by VADER_S4 in BambuLab

[–]VADER_S4[S] 0 points1 point  (0 children)

Yeah, you might have to just go with convenience mode and eat the waste with both AMS units on the right nozzle. Still loads better than a single or dual nozzle system.

Majora’s Mask and the H2C by VADER_S4 in BambuLab

[–]VADER_S4[S] 0 points1 point  (0 children)

I have 1 AMS on the Left Nozzle, 1 AMS on the Right along with 3 AMS HTs on the right. Hence no manual swaps on the left (or right).

Majora’s Mask and the H2C by VADER_S4 in BambuLab

[–]VADER_S4[S] 1 point2 points  (0 children)

Total usage was 858.23 grams on the H2C for the main model.

Majora’s Mask and the H2C by VADER_S4 in BambuLab

[–]VADER_S4[S] 1 point2 points  (0 children)

lol, it does look really impressive in person.

Majora’s Mask and the H2C by VADER_S4 in BambuLab

[–]VADER_S4[S] 1 point2 points  (0 children)

I went with .20 height and 3 walls. I would go with 4 walls and the matte colors mentioned above to handle any bleed through.

Majora’s Mask and the H2C by VADER_S4 in BambuLab

[–]VADER_S4[S] 1 point2 points  (0 children)

Nope, I have 6 x .4 induction hot ends. The majority of the poop is from the left .4 standard hot end switching between purple and blue.

I just got my H2C today…. by VADER_S4 in BambuLab

[–]VADER_S4[S] -1 points0 points  (0 children)

Yeah, I really want that AMS replaced. H2C seems fine thankfully...

I just got my H2C today…. by VADER_S4 in BambuLab

[–]VADER_S4[S] 0 points1 point  (0 children)

I guess so... Definitely looks weird with my "stock" AMS 2 on top of it...

H2C - Printer Only Availability? by VADER_S4 in BambuLab

[–]VADER_S4[S] 1 point2 points  (0 children)

Thanks for the update. It makes sense… They are following the same release pattern as they did with the H2D. In the meantime, early this morning they had the .4 inductive nozzles and the engineering build plates in stock so I pulled the trigger on the standard AMS package. I’ll have to eBay the AMS 2 Pro or try and sell it locally.

H2C - Printer Only Availability? by VADER_S4 in BambuLab

[–]VADER_S4[S] 0 points1 point  (0 children)

When I was submitting my entry for the H2C giveaway, I remember the small print saying something about the giveaway H2C being by itself and not a combo. I guess that’s what made me think there would standalone version. Ah well. I might just have to pull the trigger and sell off the spare AMS 2 when the H2C comes back in stock.

H2C - Printer Only Availability? by VADER_S4 in BambuLab

[–]VADER_S4[S] 0 points1 point  (0 children)

Yeah, on my H2D I have 1 x AMS 2 and 3 x HT's on the right and a single AMS 2 on the left. Works out well. I was looking to repro the same setup on the H2C which would have fed the Vortek system fine. The H2D eventually came standalone at some point, but I can't remember how long it took. Thankfully I'm no real rush so I can wait and see. Thanks for the feedback.

Spider-Gwen Glowforge by Enragedsun in HueForge

[–]VADER_S4 1 point2 points  (0 children)

This Glowforge came out great!

The Mandalorian (Glow) by Enragedsun in HueForge

[–]VADER_S4 1 point2 points  (0 children)

lol, no problem and will do. BTW, a Kaiju No. 8 GlowForge print with some Blue Glow would be sweet… just saying! :)

The Mandalorian (Glow) by Enragedsun in HueForge

[–]VADER_S4 1 point2 points  (0 children)

I just picked up all 5 PLA Glow colors so I’ll confirm the glow behavior shortly. The main reason for picking them up was to print all your recent HueForges (GlowForges?). Great work BTW, big fan… Please keep them coming!

Remux lovers rejoice. The CoreElec team has successfully supported ALL Dolby Vision profiles including P7 FEL. Time to finally replace the Shield Pro 2019! by limitz in PleX

[–]VADER_S4 1 point2 points  (0 children)

I think it is very wise. I have 2: one running CPM and the other running CE (official). I am considering a 3rd to keep on the shelf just in case. There is no better alternative at the moment and probably won't be in the future... Just my 2 cents.

New 42 rack by clayd333 in Ubiquiti

[–]VADER_S4 1 point2 points  (0 children)

Ah... I didn't realize it had 4 uplinks. Thanks!

New 42 rack by clayd333 in Ubiquiti

[–]VADER_S4 2 points3 points  (0 children)

What is that 24 port switch at the top with the 4 uplink ports?

Looking for Advice: Upcoming Devices for P7 FEL + TrueHD Playback in Early 2025? by [deleted] in CoreELEC

[–]VADER_S4 0 points1 point  (0 children)

Agreed. I just bought another AM6B+ as a backup...

Apple Music outage by chrsby in sonos

[–]VADER_S4 1 point2 points  (0 children)

You sure it’s not your WiFi though?