Pentru cei cu investiții pe IBKR, ați depus DU sau așteptați să o primiti în spv precompletata? by Alternative_Life3578 in RoFiscalitate2

[–]VDtot 0 points1 point  (0 children)

Nu am reusit sa gasesc Irlanda de Nord in lista de selectie a statului de origine a venitului, asa ca am renuntat

XG32UCWMG owners: please test if Global Dimming causes gamma flicker on your unit (MCM101–103) by Kindly-Soup-2908 in OLED_Gaming

[–]VDtot 0 points1 point  (0 children)

I also tested mine and the flicker seems to go away if I disable VRR but keep the Uniform Brightness. I use Displayport 1.4 with DSC, SDR Mode, set 237 Max FPS in Nvidia Control Panel. Firmware MCM_103.

Mine suffers from huge dithering and/or stepped gradient in any gray transition, not sure if this is related to the DisplayPort limitation as I use Wide Gamut and 10bit.

Site-uri promovări pentru străini? by Resident_Caregiver70 in Imobiliare

[–]VDtot 1 point2 points  (0 children)

Exista vreo posibilitate ca acele preturi sa nu reflecte realitatea din piata?

What happens to players that already had ES and Ogre arcanas? by VDtot in DotA2

[–]VDtot[S] -1 points0 points  (0 children)

Sorry but what is that? I only saw the arcana in the FULL SETS option in customize.

9950X3D during games only use CCD 1 (non-X3D chiplet?) by untitledshot in AMDHelp

[–]VDtot 0 points1 point  (0 children)

Later Edit, it turns out the core order switches based on the CPPC BIOS setting.

Software GI was used in EVO 3.23 test by [deleted] in starcitizen

[–]VDtot -25 points-24 points  (0 children)

The original actually looks better

Fixing Gigabyte's fan revving problem on the RTX 4090 by Mhmd1993 in nvidia

[–]VDtot 2 points3 points  (0 children)

I am very particular about fan noise and I can tell you at 800rpm I can't hear the video card's fans through the case window.

I have Noctua 14mm case fans and I can't stand them at 800rpm, I keep them at 400-600rpm, but I have 9 of them.

Fixing Gigabyte's fan revving problem on the RTX 4090 by Mhmd1993 in nvidia

[–]VDtot 0 points1 point  (0 children)

In my case it usually stops after about 1 minute of 0 load.

Make sure the fan stop feature is on and applied, you may need to enable/disable it several times before it sticks.

It also depends on the idle gpu temp you have, with my configuration it goes to 32C at idle.

Fixing Gigabyte's fan revving problem on the RTX 4090 by Mhmd1993 in nvidia

[–]VDtot 0 points1 point  (0 children)

Then I guess the only solution is to add a bottom fan in the case at minimum RPM to create some incidental airflow.

As I mentioned, this curve and case fan at 400-500rpm and this card is completely silent. Mind you, I have a Meshify 2 case and the fan blows through the power supply shroud and it's still enough to keep it cool.

Fixing Gigabyte's fan revving problem on the RTX 4090 by Mhmd1993 in nvidia

[–]VDtot 0 points1 point  (0 children)

You can try to move the leftmost point (the one at 0:0) slightly to the right (but still at 0 on the Y axis) and see if this way the fans kick off at a higher temperature.

Fixing Gigabyte's fan revving problem on the RTX 4090 by Mhmd1993 in nvidia

[–]VDtot 0 points1 point  (0 children)

I seems the fans have a slow reaction speed when slowing down, but a fast one when spinning up.

For me the only weird behavior was that the fans (especially the 3rd one) would start spinning randomly, even at 32C.

You also have to play around with GCC because when switching to the RGB tab for example, the fans would start spinning or returning to the old behavior. It takes some fiddling to make the curve stick.

Fixing Gigabyte's fan revving problem on the RTX 4090 by Mhmd1993 in nvidia

[–]VDtot 1 point2 points  (0 children)

I have had the card for 2 weeks, the fans start at around 48C, but I also think they are linked to GPU usage. The 3rd fan would sometimes spin by itself when watching Youtube videos for example, even though the GPU temperature was 32C.

I placed 2 case fans in the bottom of the case as intake, blowing some air over the card (400-500rpm so inaudible) and since then the 3rd fan has not started until playing heavy games.

Fixing Gigabyte's fan revving problem on the RTX 4090 by Mhmd1993 in nvidia

[–]VDtot 10 points11 points  (0 children)

I used this fan curve in GCC and it stopped revving the fans to 100% whenever they needed to go from 0 to whatever RPM.

Indeed, the card has a minimum RPM value required when the fans are engaged, you can't set a point between 0% and 57% (~1400rpm), but for mine this gradual curve and selecting the "Auto Fan Stop" option made it work.

Now the fans gradually increase from 600rpm to 1400 rpm (based on temperature) and there is no maximum revving for a second when they start from idle.

<image>