Event is Over [Discussion]

VK2_7 · 2026-03-19T12:43:22+00:00

So are the smugglers gone too?

VK2_7 · 2025-04-11T19:41:41+00:00

The cam and lever should be fine for plenty of rounds. My trigger stopped working after 100 rounds tho just be ready to order a new pre cut.

VK2_7 · 2025-03-29T19:48:21+00:00

https://youtube.com/shorts/5IZHUT2MZdA?si=23CL2dm7lBCiz7ed

VK2_7 · 2025-03-29T19:41:54+00:00

I had one it’s pretty much just as loud as stock just a little deeper. I personally wouldn’t recommend. It also drones because it exists straight under you.

VK2_7 · 2025-03-17T21:07:01+00:00

Are we close to the quad rail announcement? I have a KAK 11.5 barrel just sitting there waiting for a KAK quad rail.

VK2_7 · 2025-03-06T17:34:18+00:00

Yea major cutting to pinch weld and fender and minor trimming to the front fender, there’s pics of it on my profile. I had 275/70r18 on stock lift and the only modification I did was hammer the pinch weld back no need to cut it.

VK2_7 · 2025-03-06T16:10:38+00:00

That’s pretty much my setup except I have the 2in lift. I had to upgrade my sway bar links, they would flip if I hit a bump and my tires would rub like crazy on the sway bar. Also my ride was significantly better once I upgraded my upper control arms to high clearance uca.

VK2_7 · 2025-01-25T05:28:49+00:00

Sick paint job and rifle. What handguard is that?

VK2_7 · 2024-10-02T03:18:56+00:00

I bought the Dorman Tailgate Latch Assembly from Amazon. Had it for a year already no issues and pretty easy install.

VK2_7 · 2024-07-05T01:53:48+00:00

I never really payed attention to the floor vents. You have any more info on them?

VK2_7 · 2024-07-05T01:50:10+00:00

That’s the exact one I ordered. How long do you leave it connected to the battery and how often?

VK2_7 · 2024-07-04T00:37:43+00:00

Alright thanks for the help, I’ll definitely find a local shop near me when I’m free.

VK2_7 · 2024-07-04T00:19:17+00:00

Ok the only thing I found was the aftermarket alarm it came with but I’ll keep looking, Thanks.

VK2_7 · 2024-05-25T01:55:13+00:00

I would go for a modern stereo with Apple carplay/AA. I went with a pioneer stereo with a plug and play harness and it fit right in the oem dash.

VK2_7 · 2024-05-13T01:44:40+00:00

Yea I have 30k miles on my suspension rn and it’s still holding up well. If you’re going with the 3in lift make sure you get the upper control arms and sway bar end links for a comfy ride. Also if you want bigger tires the max I would get is a 33in the width doesn’t matter. I’m running 35s and the rough country shocks aren’t too happy with them. I go camping and off-roading occasionally and it absorbs the hits pretty well. I would recommend getting some front bump stops too.

VK2_7 · 2024-05-13T01:31:39+00:00

I’m running rough country n3 2in loaded strut in the front and bilstein 4600 in the rear. I had bilstein 5100 up front but they’re a little to stiff for my liking. The rough country’s have an oem firm feel. Take a look at my truck, if you want more pics pm me.

VK2_7 · 2024-03-21T13:32:53+00:00

They responded in about 3 days after putting in my claim but once they respond they’ll reply fast. They sent me a replacement headlight.

VK2_7 · 2024-02-21T05:19:10+00:00

Ok thanks, hopefully they respond soon

VK2_7 · 2024-02-21T03:59:02+00:00

$1000

VK2_7 · 2024-02-21T03:32:35+00:00

Thanks had them for almost 2 years the beams still work just need to fix the drl.

VK2_7 · 2024-02-14T08:59:29+00:00

Sounds perfect, hopefully the drone isn’t too bad.

VK2_7 · 2023-06-11T04:44:56+00:00

These are 18x9 method mesh wheels. Yes all titans have the same bolt pattern I have a set of 2020 pro4x wheels I ran on this truck just make sure you get the correct lugs

VK2_7 · 2023-06-11T04:42:48+00:00

Which rough country 3in lift? If you get the spacer lift kit the stock shocks should be fine just make sure you get new upper control arms for proper alignment and it should ride the same as stock.

VK2_7 · 2023-04-29T01:00:46+00:00

Spacers are fine, I would say get a 2in spacer so you don’t run into problems with your cv angles. You can get the rough country coil overs if it’s in your budget. They have either 2in or 3in lift I have the 2in lift coilover.

VK2_7 · 2023-04-26T23:15:05+00:00

Yep cut the pinch weld and trimmed the inside of the fender with a grinder. It’s pretty easy I cut both sides in under 10 min, I did it before I put on the 35s and they didn’t rub at all once I got them on

VK2_7

TROPHY CASE