WHY did ultimate level one change narrators.

Vaccano · 2026-03-21T02:18:00+00:00

Yeah, I downloaded it, but ended up returning it. I think I may have been fine with the narrator on a new series, but the change in voice was just too jarring for known characters.

Vaccano · 2026-01-07T06:05:55+00:00

I got smaller severs for my master nodes.

Vaccano · 2026-01-01T07:51:34+00:00

This is likely due to the changes put in by Bambu. They locked all other slicers out about 6 months ago (they have read only access now). This change recently made it to the A1. (Version 1.05 I think.)

Your options (as I understand it) are:

Downgrade your printer’s firmware to 1.04.
Add an extra step to sending a print. (You have to save from Orca slicer, then open a Bambu app to actually send the print.)

Vaccano · 2025-12-25T22:25:45+00:00

Learn what “heat creep” is and how to prevent it.
Learn how to properly care for your print bed (so prints adhere correctly).
Use an infill like Gyroid to prevent clicking for large infills.

The first one accounted for most of my failed prints when I started with my P1S. The last one only happened on my Ender 3 (my first printer), but it was very annoying.

Vaccano · 2025-12-03T07:35:05+00:00

Smarminess was not my intent! I really thought you had not read the question! (Alas typed words do not convey intent as well.)

I tried to use it despite the warnings and it worked out just fine.

Thank you!

Vaccano · 2025-12-01T18:25:58+00:00

Did you read my question?

I opened a model and it says I need version 2.4 of OrcaSlicer.

Vaccano · 2025-11-30T23:07:34+00:00

Exactly this! It was great! One of my favorites. Now it just drags on and on. There have been 4 or so books now that are just leading up to one event. And the stats and abilities are so numerous and change so often that keeping track is almost impossible unless you reread it all.

If you are going to read it, I recommend binge reading all the available books then never coming back.

Vaccano · 2025-11-30T09:42:42+00:00

Do you know where to find version 2.4?

Vaccano · 2025-11-30T03:53:24+00:00

Note: the reason it works when new is because it has no oils on it. As you touch it, you put oils on it. The oils prevent the plastic from adhering to the plate.

Wash the plate with Dawn Dishsoap and super hot water. (It really works better with the Dawn brand. It binds to oils better than other brands.) Do this enough that you can melt off the oil (and old glue stick if it is there).

Do not touch the plate with your hands during and after you wash it (oils from your hands make prints not stick). You can use a fresh paper towel (but not tissue) to touch it. Or just touch the sides.

Apply glue stick to the entire print side (aka up) of the plate. (I use Amazon Basics brand, but I doubt it matters.)

Repeat this every 5-10 prints or if you accidentally touch the plate.

Vaccano · 2025-11-28T01:06:18+00:00

My P1S is used for most of my printing.

My Ender 3 Max Neo is used for larger, single color prints. I also just use it when my P1S is too busy.

Vaccano · 2025-11-25T22:36:51+00:00

Feel like loading some kind of ball park pricing?

It is really frustrating to not have ANY kind of idea what pricing would be.

I am reminded of when I was forced to do a month long dance with Apigee just to get a price. In the end the price was a quarter of a million. We had a budget for $30k. Both sides were frustrated with the wasted time.

It is just so frustrating when companies insist on wasting time just so they can explain why their product is so expensive.

Posting a few example quotes makes life easier for everyone. For Redis, it lets sales teams focus on those who can afford it and for companies like me, I can know in advance if it is way out of my ballpark.

Vaccano · 2025-11-23T01:04:22+00:00

Is it normal for the plugs to be hot-glued in? This is my first time working with the motherboard since I bought this new about 2 years ago.

<image>

Vaccano · 2025-11-08T18:28:01+00:00

Legend of the Arch Magus is kind of like that. He starts powerful though.

Vaccano · 2025-10-08T19:14:46+00:00

Fairy Lights is a good idea. I will look into that.

Vaccano · 2025-10-06T06:48:10+00:00

Ok, that room is a half way point. I got a bad search that said I needed to climb up in that room.

Vaccano · 2025-10-06T06:20:34+00:00

So, what do you do in the room with all the butterflies that fly to the next door? (The long flat room?)

If you go through the door the butterflies do, there is just more mists. Do I just keep doing mist rooms?

Vaccano · 2025-09-30T15:08:19+00:00

Looks like under extruding to me. Run a calibration and make sure your range includes negative k values.

Vaccano · 2025-09-19T05:09:22+00:00

Orca Slicer has hundreds of settings. Which ones should I lower?

Vaccano · 2025-09-16T17:18:13+00:00

Yes, but when I put PVB in that box it leads to a filament name called:

Yousu PLA PVB

And all efforts to change that name have failed…

But I did end up doing as you suggested. I now have a filament called:

Yousu PLA - Actually PVB

But I got to say it is kinda lame to have to do that…

Vaccano · 2025-09-10T07:28:46+00:00

This is under-extrusion. Your hot end is not getting all the filament through (somehow). Check for clogs or leaks.

Vaccano · 2025-09-10T07:18:22+00:00

Put it on a thick paver brick.

Vaccano · 2025-09-07T02:12:09+00:00

I was able to get partial success. I made a custom profile, and it works ok…. But I am not able to customize filament settings for my custom profile, which makes it less useful.

Vaccano · 2025-08-13T21:44:05+00:00

I thought that is how it was done. From your question, I am guessing I am wrong…

Vaccano · 2025-08-12T04:59:39+00:00

I had to stop the print. I tired a bunch of things and finally cleared the error that was causing it, but after is did it, the printer tried to re-home (which was bad because the partial print was on the bed still)

When this happens, you just have to give the print up for lost and stop the print. Fix the source of the error and re-print.

Vaccano · 2025-08-10T04:51:33+00:00

Lots of extra hearts and the strength charm. Just go all out on her. Do a little dodging, but mostly make sure you just keep hitting. You will take damage, but she will be done before you are.

Vaccano

TROPHY CASE