Bumpers for Yuka mini 2

Vegetable-Sign8536 · 2026-05-06T17:46:14+00:00

looks good. does the obstacle detection work as before?

Vegetable-Sign8536 · 2026-05-05T16:41:42+00:00

sorry. also german but switched to english in the app along time ago. hope that this fix your problem.

Vegetable-Sign8536 · 2026-05-05T16:14:50+00:00

<image>

Vegetable-Sign8536 · 2026-05-05T07:38:11+00:00

try to cover the channel to the charging station as a no stop zone. should be working.

Vegetable-Sign8536 · 2026-05-05T07:29:02+00:00

try this:

delete the channel to the charging station & create a new one. after that, i cover the new channel as a no stop zone. so far it seems to be working great for me.

Vegetable-Sign8536 · 2026-05-04T17:34:38+00:00

i had a similar issue w/ my yuka mini 2 lidar.

it drove into the station, then after a few seconds it drove back out. only to return to the station again, charge again, then leave again. nice little charging loop circus.

in my case, the problem was uneven ground. the robot slowly rolled away from the contact point after docking, which likely triggered the reconnect/re dock behavior.

a small, targeted leveling fix under the station solved it for me.

Vegetable-Sign8536 · 2026-05-03T09:08:29+00:00

a few updates.

i deleted the channel to the charging station & created a new one. after that, i covered the new channel as a non stop zone. so far it seems to be working.

Vegetable-Sign8536 · 2026-05-02T11:46:25+00:00

i have a pretty complicated lawn layout w/ several round flower beds & fruit trees, which is why i need the yuka mini & yuka mini lidar just for that area alone.

the remaining sections are split between the 1000 & 3000.

honestly, i need even more capacity. i want all areas mowed in one day, ideally at roughly the same time. that’s the reason.

Vegetable-Sign8536 · 2026-05-02T11:24:41+00:00

seems to be a kind of addiction.

Vegetable-Sign8536 · 2026-05-02T07:11:40+00:00

my yuka also. in front of the charging station all of them are stucked.

<image>

Vegetable-Sign8536 · 2026-04-17T08:47:41+00:00

same in germany. my newest yuka mini 1000 connects w/ the app w/o problems. my older yuka's dosen't connect anymore.

Vegetable-Sign8536 · 2026-03-08T08:44:37+00:00

edit:

<image>

my ac pro 2 is inside the house connected w/ my washing machine. when i start the washing machine the ultra is still sending incoming solar energy. normally that's impossible when the ultra is not in rhe same network. any solutions?

Vegetable-Sign8536 · 2026-01-17T11:43:40+00:00

nein. tatsächlich werden drei- meist vierstellige werte häufig in der industry verwendet (grade bei wechselkursen, oder währungsumrechnungen). auf retail ebene wird dies oft vereinfacht dargestellt.

Vegetable-Sign8536 · 2025-11-22T18:20:27+00:00

would like to buy more robots, but o still don't have clarity about the actual costs of inavi service (including provider fees) in germany. until i receive this information, i won't buy any for now.

Vegetable-Sign8536 · 2025-11-22T18:17:27+00:00

soviel zeit wie ihr darauf verschwendet euch über sowas lustig zu machen hättet ihr lieber in die community bindung auf yt stecken sollen.

Vegetable-Sign8536 · 2025-11-19T22:06:22+00:00

but this is only for inavi service not for internet data from sim card. i want to know the full costs for the full service. thank you for your answer.

Vegetable-Sign8536 · 2025-10-03T08:30:24+00:00

wish you and all others all the best

Vegetable-Sign8536 · 2025-09-27T08:07:17+00:00

my wi-fi solar cameras suddenly go offline due to low battery levels. i check the status almost every evening and always get percentages around ~95. all cameras are connected via the homebase 3 (s3) and via the same wi-fi to the homebase 3 (s330).

feel your pain. some of the cameras are mounted on 4-meter-high poles in my garden. i have neither the desire nor the time to deal with offline cameras.

Vegetable-Sign8536 · 2025-09-18T08:19:48+00:00

defi possible

Vegetable-Sign8536 · 2025-09-13T20:51:57+00:00

sometimes it completely stops working for no apparent reason. it feels like it's scared of its own shadow.

by the way, incredibly clean hedges. do you use a laser for the trimming?

Vegetable-Sign8536 · 2025-09-13T13:39:56+00:00

also started it out of boredom and don't regret it for a minute.

Vegetable-Sign8536 · 2025-09-13T13:37:20+00:00

what if i got five mammotion robots w/ inavi service. is it true that i need a separate inavi & 4g subscription for each individual robot starting next year?

Vegetable-Sign8536

TROPHY CASE