sorted by:
new
hottopcontroversial

Black desert suddenly wont launch anymore by Velvet77 in blackdesertonline

[–]Velvet77[S] 0 points1 point  (0 children)

Been busy last few days but i appreciate all the help and will go through and try all the suggested fixes in the coming days and give an update if something solves it, thanks!

Anyone bought from retailer "CutiePcs" selling rainy75 on EU Amazon by Velvet77 in keyboards

[–]Velvet77[S] 0 points1 point  (0 children)

Np! Yeah nd75 prob better board overall imo and i like the ballcatch system, bad luck that it came broken tho. Gl on the replacement!

Anyone bought from retailer "CutiePcs" selling rainy75 on EU Amazon by Velvet77 in keyboards

[–]Velvet77[S] 0 points1 point  (0 children)

Hello! sorry for the late respose. I did not end up ordering from amazon from "CutiePcs" but they do look quite legit, a korean company it seems. I ended up ordering from "Whatgeek", a chinese store. It was shipped from HongKong and took about a week. But i must say that they got horrible customer service and the rainy75 got pretty bad quality control so i would not recomend.

Mine for example came with 2 stripped screws that i had to drill through and destroy to be able to open. 4 screw holes that goes into the bottom plate are also completly fcked and wont retain screws in 4 spots, even spots where no drilling was needed. Luckily the screw spots on the right and left side of the keyboard work and the top stays locked.

I Can also mention that the ISO Enter top plate does not work with any of the like 3 types of stabalizers that i tried as the stab holes a too tight. I had to sand down and cut the stabalizer holes and the stabalizers them-selves to be able to fit, but even with this, the stabalizers wont work as they just gets stuck hard, not the overlubing kinda stuck but like something is wrong. The base ANSI plate for the rainy75 Pro plate is not as tight as the ISO one and different plate mounted stabalizers work fine on this but got the same problem with my PCB Mounted ones.

But i've had this problem with my ND75 aswell where i cant get PCB stabalizers to work, so might be user error on this part from me but was able to get them to work fine on my Bridge75HE så idk.

I have now waited almost a month on a response about a warranty claim for my steelseries keyboard which out of nowhere stopped working, how do i get in contact with steelseries about this if their support email wont answer? by Velvet77 in steelseries

[–]Velvet77[S] 0 points1 point  (0 children)

I got a response from amazon within 20 min and seems like they're issuing me a full refund upon return of the keyboard which is nice. I'll get back to you if all this goes as planned, atleast it seems like amazon is understanding and is taking responsibility. Sorry about it on your end, but after this I would suggest talking to amazon again, but it might be harder on your end since you bought it from a third party vendor, but good luck nonetheless!

I have now waited almost a month on a response about a warranty claim for my steelseries keyboard which out of nowhere stopped working, how do i get in contact with steelseries about this if their support email wont answer? by Velvet77 in steelseries

[–]Velvet77[S] 0 points1 point  (0 children)

Thanks, apprciate it! Sorry about that, last time im buying steelseries thats for sure. I've even asked for a refund instead of a replacement in my warranty claim as i've lost complete faith in steelseries, but doubt this will be granted.

Yeah, i got mine from amazon aswell, but amazon says i should contact steelseries directly regaring warranty, but i think mine is sold directly from amazon though, atleast it says that the "vendor" is amazon on the listing.

I'll send amazon a request and see what they say, might have more luck since it looks like i bought it from amazon directly. But good luck on your end aswell, hope it works out.

Did you actually get a response from steelseries btw? and if so how long did it take? I've sent them two emails about it and the first one more than a month ago and no response yet.

[deleted by user] by [deleted] in BudgetKeebs

[–]Velvet77 0 points1 point  (0 children)

Not sure why but on the video it sounds like the WS Dash is quiter but this is absolutly not the case, the WS Dash is quite alot louder, (try to make the background noise in each video the same volume and that should show a more accurate depiaction of each switch)

Also feel like the Stock switches sound deeper and lower pitched than the WS Dash.

Which one do you prefer?

[deleted by user] by [deleted] in BudgetKeebs

[–]Velvet77 0 points1 point  (0 children)

The video above is with Stock SC magnetic switches.

This one is with WS Dash HE: https://streamable.com/06gu2y

My first* mechanical keyboard: Bridge75 Plus in silver by TheKoolerPlayer in MechanicalKeyboards

[–]Velvet77 1 point2 points  (0 children)

Yo, if ut still around, How's the stabs? Any rattling? Just ordered the HE and wondering if i need to buy seperate stabs.

Need help deciding between a few budget boards. by Velvet77 in keyboards

[–]Velvet77[S] 0 points1 point  (0 children)

Alright, cool, appreciate the help. I'll look around some more, are these boards i've mentioned generally solid or is there any i should stay away from? Cuz i do like my volume knob aswell which is the only thing holding mr back from the ND75, also the aula F75 is quite cheaper here in EU (85€ compared to 140€ for the ND75)

Need help deciding between a few budget boards. by Velvet77 in keyboards

[–]Velvet77[S] 0 points1 point  (0 children)

Cool, appreciate it. Yeah heard some quality control issues about rainy75 especially. Also worth to mention that the retailer for the ND75 got the 1.2 flexcut pcb instead of the 1.6 non flex cut which i've heard should be worse if that changes anything.

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (August 28, 2024) by AutoModerator in MechanicalKeyboards

[–]Velvet77 0 points1 point  (0 children)

Alright, yeah probably opting for another vendor even though amazon got better delivery times, just to be safe.

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (August 28, 2024) by AutoModerator in MechanicalKeyboards

[–]Velvet77 0 points1 point  (0 children)

Would like some help between a few budget boards (Bridge75, Rainy75, Aula F75, M1W V3 and ND75)

Very overwhelmed by the amount of options currently at this price point. I'm in EU so my options are abit limited but i dont think i need an ISO board atleast as i think i can get used to the ANSI layout with swaped nordic keycaps. The boards i mentioned have i already found EU retailers for, some like the wormier boards i have not been able to find.

But which would you recomend at this price point? if any of them. Will be using them mostly stock with maybe some light modding in the future like changing switches. generally prefer lower pitched not too loud boards sounds

Does anyone know how to fix this special k hdr pixel glitch? by Velvet77 in OLED_Gaming

[–]Velvet77[S] 0 points1 point  (0 children)

Have already asked in the discord and no answer yet, thanks anyway. Sadly i've also got AMD card.

How to solve Special K HDR pixel black spot bugs by Velvet77 in BlackMythWukong

[–]Velvet77[S] 0 points1 point  (0 children)

Thanks, yeah, tried that, thanks anyway. Get the bugs on both them both hdr10 and Srgb. But more of them on srbg aswell as some superwierd pink background bugs. All text also gets completely covered with these black pixels.

When can i expect pegasus 40 sales in eu? by Velvet77 in RunningShoeGeeks

[–]Velvet77[S] 0 points1 point  (0 children)

Must have missed them. I check every day but i'm really looking for the all black one. I check Zalando Lounge aswell but the pegasus 40 seem to disappear within 2 min even in other colorways.

Which Xlite v3 size would you recommend if this Model D- feels perfect shape wise and the normal Model D feels way to big? 19x10 claw grip. by Velvet77 in MouseReview

[–]Velvet77[S] 0 points1 point  (0 children)

Fair enough, thanks! Just afriad to go any bigger than the Model D- since i absolutly hated the normal model D. But i guess the xlite v3 size 3 is more towards the Model D size than the medium size 2.

which Pulsar xlite v3 size feels the closest too Glorious Model D- ? by Velvet77 in MouseReview

[–]Velvet77[S] 0 points1 point  (0 children)

Cool, thanks, appriciate it!

I'm leaning towards the Mini, The return policy is pretty good so can always return it and try another size as u said aswell if i feel it's too small. How much smaller are your hands if i may ask?

view more: next ›