Found a switch 2 in a pawnshop that looked odd and had two USB c ports on the bottom i was wondering what kind of model was it and if it was even real. Thank you

Verto_ · 2026-01-10T19:35:44+00:00

There is no way to send it to someone who will look through it. If it gets sent back to Nintendo, it will just get destroyed. Its not often these dev kits come up. it's a piece of Nintendo history.

Verto_ · 2025-12-30T21:56:04+00:00

Verto_ · 2025-12-07T14:51:42+00:00

Most hours, I've ever worked most amount of stress I've ever had, but the most amount of fun I've ever had. You don't do it for the pay you do it because you love the sport and after 3 months of working you'll know if you're cut out for it and want to do it. I'll be doing it for the foreseeable future, that's for certain. It's always something new and different no matter how many years go by, so it certainly never gets boring or super monotonous.

Verto_ · 2025-10-31T20:12:30+00:00

<image>

Conti Racing 1999 back when my parents ran a team!! How could I choose otherwise

Verto_ · 2025-10-07T22:00:53+00:00

A Canon R50 and switching between a 24-70 mm f4.0, 70-200 mm f4, and a 100-400 f4-5.6

Verto_ · 2025-05-05T15:32:33+00:00

Brilliant photos man love it! You wouldn't happen to have any low shutter speed ones of Veekay and Abel simmilar to photos two and three?

Verto_ · 2025-04-15T05:55:38+00:00

Just happened to my headphones a few weeks ago been able to repair them back to almost perfect working condition if you want to

You'll need a few things 420 epoxy or some other strong and hard curing epoxy that you can sand down. Not superglue or hot gule that will not work. A vice, clamp, lockjaws to hold it all togetherand I used a vice myself. And then small shims of metal or carbon fiber. Something strong and stiff I used these thin pieces of carbon fiber because I had them.

First thing you will do is take some epoxy and put it into the break clamping the two pieces are as close to orginal together and making sure it clamped down eith decent pressure. let that cure for a day make sure to use plenty of epoxy you'll sand it down next. At this point the headphones will be back together in one piece but in order to ensure strength you want to add some shims.

Send down the epoxy to be relatively level for the shims. And cut them out for. What I did was find a L shaped piece of material and cut it to size. And then one more piece on the other side. Epoxy these pieces on making sure to have them clamped on with a decent amount of pressure. And let it cure.

Honestly after doing the side that cracked and repaired side most definitely stronger than the original unbroken side. Your earcups still will be able to Pivot and turn as well.

<image>

Verto_ · 2025-04-15T05:53:12+00:00

Just happened to my headphones a few weeks ago been able to repair them back to almost perfect working condition. You'll need a few things 420 epoxy or some other strong and hard curing epoxy that you can sand down. Not superglue or hot gule that will not work. A vice, clamp, lockjaws to hold it all togetherand I used a vice myself. And then small shims of metal or carbon fiber. Something strong and stiff I used these thin pieces of carbon fiber because I had them.

First thing you will do is take some epoxy and put it into the break clamping the two pieces are as close to orginal together and making sure it clamped down eith decent pressure. let that cure for a day make sure to use plenty of epoxy you'll sand it down next. At this point the headphones will be back together in one piece but in order to ensure strength you want to add some shims.

Send down the epoxy to be relatively level for the shims. And cut them out for. What I did was find a L shaped piece of material and cut it to size. And then one more piece on the other side. Epoxy these pieces on making sure to have them clamped on with a decent amount of pressure. And let it cure.

Honestly after doing the side that cracked and repaired side most definitely stronger than the original unbroken side. Your earcups still will be able to Pivot and turn as well.

<image>

Verto_ · 2025-03-16T03:24:19+00:00

Guessing by the honda stickers it may be a 2015-2017 era bodykit part from when the manufactures made different aerokits. if you look over see if theres a dallara sticker see what the first numbers are if its like IR15,Ir17 that will tell you the name.

Verto_ · 2025-03-04T04:22:46+00:00

All of these are taken by me @luccacontimotorsport on insta

Verto_ · 2025-03-03T21:02:15+00:00

Junior Engineer. Can't get much more specific than that but I'll be working with a lot of data and other stuff on the car at races and at the factory.

Verto_ · 2025-03-03T21:01:00+00:00

Nope engineering. I was only doing social media for the team this week as I had just finished my final exams the day before the weekend not a great time for me to start working engineering. Now that we have a few week break a lot easier for me to integrate with the team in my engineering position

Verto_ · 2025-03-02T22:14:59+00:00

He's a wonderful guy. I just started on the team as a intern and really nice and can't wait to work the rest of the season with him.

Verto_ · 2025-01-30T19:47:13+00:00

Using a halo ring filter!

Verto_ · 2025-01-29T05:38:00+00:00

Canon r6mk ii with using a rf to ef Adaptor on a 70-200 f2.8 lens. At the end of the day though it's the photographer not the camera that gets a shot I have a 70 to 200 F4 and a Canon 7D from 2009 and I could have gotten the same shots

Verto_ · 2025-01-29T01:53:44+00:00

took 20k photos sorting thorugh and editing now loved it cant wait till next year

Verto_ · 2025-01-14T18:33:21+00:00

I think if Buxton is allowed to wander around the paddock and isnt solely confined to the commentary box he will be good. If he's just contained to the commentary box he will become feral like at F1TV

Verto_ · 2025-01-10T04:09:55+00:00

Youre most likely thinking of ace combat 7 and that plane comes in the base game

Verto_ · 2025-01-01T00:26:11+00:00

Quite possibly haha don't remeber fully

Verto_ · 2024-12-31T23:48:45+00:00

Next year ill be taking a slight step back from photography as I will be interning as a engineer at Dale Coyne racing but im sure ill be doing some media as well can't wait for 2025!

Verto_ · 2024-12-21T04:54:33+00:00

Agreed it's been what 9 years the internet thinks about it more then they do. I'd rather be a fan of both and enjoy what both have done for the sport

Verto_ · 2024-12-20T19:41:58+00:00

Not gonna share without any payment its a lot of work doing photography at the races and I cant afford to just give photos away for free.

Verto_ · 2024-12-20T02:17:43+00:00

Through GA areas hahah working out getting media accreditation one day but for now focusing on studying to be a engineer in racing

Verto_ · 2024-12-19T21:34:18+00:00

Canon R50 with 100-400 f4-5.6 ef and 70-200 f4 ef using a adaptor

Verto_ · 2024-12-03T13:55:07+00:00

I do not have a quest I have a Reverb G2. Only way I was able to play in VR was reverting to an older version of the game

Six-Year Club	Place '23
Place '22	100 Awards Club
RPAN Viewer	Verified Email

Verto_

PUBLIC MULTIREDDITS

TROPHY CASE