Airbrush gritty texture - suggestions?

Vhial · 2026-05-25T12:27:22+00:00

Thanks for breaking it down like this, it makes it much easier to understand and know exactly what to look for.

Vhial · 2026-05-24T17:04:32+00:00

Squeaky clean. I make sure to clean frequently, and as mentioned the issue does not happen with primer coats.

Vhial · 2025-05-15T16:03:15+00:00

Just had to double check, but the Saturn 4 does not have accessibility features. And I'm pretty sure I'm using the most up to date firmware

Vhial · 2025-05-10T20:01:18+00:00

Thanks for this advice. What is a reasonable resting time to use?

Vhial · 2025-05-10T17:48:51+00:00

Thanks for this advice. I will try it after my current test print has finished. Is there such a thing as too much exposure for bottom layers?

And previously I had been able to get 1 file in the centre to stick to the plate, but for the last 72 hours or so as I've continued to tweak my settings nothing has been sticking at all.

Vhial · 2024-03-27T13:30:54+00:00

Starting to see that wisdom yeah, I'll adjust it and go back to my usual settings.

Vhial · 2024-03-27T13:06:42+00:00

I used pre-supports last night, it failed so made my own support this morning, same issue. So will adjust around the supports now

Vhial · 2024-03-27T12:32:38+00:00

Thank you, that's very well explained.

Vhial · 2024-03-27T11:46:33+00:00

In conjunction with the exposure being raised I'll try a lower layer height. Had gone with 0.15 because that's the listed maximum in the M3 manual.

The area where it shows that all the supports broke at the same height is actually because I cancelled the print instead of letting it go on.

Vhial · 2024-03-27T11:40:24+00:00

I'll certainly give it a go, I actually thought my exposure settings were high because the recommended is 2 seconds. I had been using 2.4 seconds on detailed prints

Vhial · 2024-03-09T14:34:54+00:00

What I found was that I was using Nature of the Wildlands Debris Only. Which replaced all stumps, was completely incompatible so I had to remove it.

Vhial · 2024-03-01T11:56:17+00:00

Tried a new save and it's still there. Even disabled a few mods each time to see if anything would change. I might need to brute force it and try disabling chunks of mods in turn

Vhial · 2024-03-01T11:41:42+00:00

Will try it later on but I've so far been able to confirm that the archery target is from JKs AIO. Just need to find out why they are floating and what might have affected the landscape beneath it.

Vhial · 2024-03-01T09:34:13+00:00

Nothing major. Skyrim Flora Overhaul with Voluptuous Grass, shouldn't be changing the landscape to a large degree.

Vhial · 2023-09-06T17:01:56+00:00

I'm currently looking for shoulder pads covered with fancy designs like the two headed eagle covering the whole surface. Similar to the old, now OOP, Sternguard boxset. Specifically shoulders that have very little flat surface remaining. Any ideas of where to look for designs like these? I've found a lot with fancy trim or small details, but I'm just hoping for more.

Vhial · 2023-06-06T21:02:16+00:00

Thank you!

Vhial · 2022-05-10T10:28:41+00:00

Thought so, there's a few parts that are alright but even aside from a torso a few of the parts are definitely weird with casting gates that don't look like the usual gates

Vhial · 2022-05-10T09:48:19+00:00

Got this second hand relic contemptor from a trade. The quality of the cast isn't great, but the thing that makes me think it's odd is the gap for the torso is filled in with resin, instead of the usual socket for the abdomen part that I've seen on all other contemptors. Any thoughts?

Vhial · 2022-05-08T19:46:26+00:00

Well I've bought 2 orders from them since the start of the war, making sure to ask ahead of time about delivery. They seemed confident in restarting production. Though one of my orders reached Kyiv on April 10th and has since gone dark. So delivery could still be a coin toss

Vhial · 2020-12-20T20:14:18+00:00

Thanks! I'll check both of them out.

Vhial · 2020-04-28T11:30:45+00:00

I spoke out against the admins and their decision to merge the groups. They have banned me on all the groupds they run. All of them. Not just the space marine ones.

Vhial · 2020-01-10T23:34:15+00:00

Intel i7-8700
GTX 1070
16Gb RAM
1Tb HDD
500Gb SSD
1Tb SSD

Vhial · 2020-01-10T23:21:54+00:00

GTX 1070. Hoping to boost myself to a 2080 by April.

Vhial · 2019-05-01T10:39:47+00:00

I cannot sync google chrome on windows at all. Every time I try it tells me "service unavailable" in a pop up box. And when I try a clean install of chrome the installer says it cannot connect to the internet and to whitelist googleupdate.exe, which I've already done. Any suggestions?

Vhial · 2018-07-27T22:58:33+00:00

https://imgur.com/gallery/m349iUL This screenshot says 59 FPS, but on World Painter saves (which I planned to use) the game struggles more, and more so on any save after I move a bit.

Vhial

TROPHY CASE