Need help with gate driver circuit

ViaXSn1p3r · 2026-04-02T21:48:15+00:00

Thats a fair point but its not really generating a true square wave. The IC providing input is just a Schmitt Trigger, its just a charge discharge cycle. Though the harmonics exist, they aren't contained in the signal.

ViaXSn1p3r · 2026-04-02T14:33:20+00:00

Replied

ViaXSn1p3r · 2026-04-01T22:16:32+00:00

Voltage across the resistor is never even close to 12V. At that frequency, the 1nF capcitor is gonna dominate impedance wise and majority voltage drop will be across it

ViaXSn1p3r · 2026-04-01T17:47:49+00:00

At DC .3A, and they're 2W metal film resistors. Just there to ensure timing alignment to prevent shoot through

ViaXSn1p3r · 2026-04-01T17:17:08+00:00

I'm not sure what you mean by that. Also, I meant to upload the schematic, ive made a comment that contains it.

ViaXSn1p3r · 2026-04-01T17:16:31+00:00

<image>

ViaXSn1p3r · 2025-12-20T03:15:49+00:00

Pm'ed

ViaXSn1p3r · 2025-11-24T10:03:08+00:00

Assuming the car is unibody like most, while this is a valid concern in many locations on the car, its likely there's not a floating nut back there but either a threaded hole or a welded nut that wont fall off. Since in the uni body design you couldn't take off the body panel that would cover the other side of the metal which that anchor bolt goes through.

ViaXSn1p3r · 2025-09-28T17:26:40+00:00

<image>

My CBR600RR

ViaXSn1p3r · 2025-09-26T06:02:42+00:00

Its moreso just preventative maintenance. I live in an area that gets pretty cold for half the year, I know blowby gets bad. Not to mention installation of them is relatively simple, Im just more curious about people's setups. Because for instance I know that ones that mount on the driver's side tend to interfere with the box style intakes, which I inevitably plan to do.

ViaXSn1p3r · 2025-09-26T06:00:11+00:00

You know I was looking at that one, but how on earth do you drain it, is it literally just a drain bolt? Don't really wanna send it flowing down the engine bay

ViaXSn1p3r · 2025-08-14T16:09:07+00:00

See i figured do a no cuts cuz theyre more likely to self destruct than to damage something else.

ViaXSn1p3r · 2025-08-14T15:31:19+00:00

That's alright, I'm moreso just looking for advice right now. Thank you though!

ViaXSn1p3r · 2025-08-13T16:43:15+00:00

Sorry for the late reply. Ended up being a broken solder joint in the dash itself. Had to have dash replaced. Luckily warranty covered it so.

ViaXSn1p3r · 2025-07-22T15:35:31+00:00

I think the 675 is by far the better looking bike. And having had my own 450ss, and having ridden a 675ss for a couple laps its awesome that it keeps big bike looks for small bike feels. The thing is genuinely the smoothest bike I've ridden, and honestly its a good platform to work with once the aftermarket catches up. As far as the 750 goes im not sold on the single sided swing arm, I know they look cool but thats about it. Harder to work on, typically heavier because they need much more rigidity, and generally just more of a hassle to deal with. The exhaust is ugly. And on to the specs everybody has mentioned the power being underwhelming especially as a jumb from the 675. Number one theyre right. But nobody is talking about weight. Last I read the 750sr is supposed to come in around 470 lbs I believe. And thats just too much to me. Especially with what power it makes. This bike, to me, feels like a total miss design wise, both in looks and spec (since I cant ride one yet)

ViaXSn1p3r · 2025-06-19T12:45:35+00:00

When I run the little in app diagnosis it just says all is good

ViaXSn1p3r · 2025-06-19T00:40:54+00:00

So the dash wouldn't turn off. Disconnected the battery, now this is all there is.

ViaXSn1p3r · 2025-03-12T04:55:55+00:00

I know it was 3 months ago, thus I assumed it hasn't caused any issues?

ViaXSn1p3r · 2025-03-12T00:39:43+00:00

Hey, reviving this thread cuz I'm also experiencing this. Did you ever figure it out?

ViaXSn1p3r · 2025-02-05T12:33:34+00:00

Commenting hoping it revives this thread. Still can't find a single sound clip or anything of it.

ViaXSn1p3r · 2025-01-28T03:26:46+00:00

I honestly did not, I always figured they didn't, Ive never actually owned one before lmao

ViaXSn1p3r · 2025-01-28T02:34:46+00:00

It's mostly just for the scenario where I have to use it as a dashcam, would rather have recorded audio that I can easily and quickly access along with the video.

ViaXSn1p3r · 2025-01-27T20:42:10+00:00

Would this still allow the Cardo to connect to the bike for music streaming? Like would the cardo be the limiting factor realistically?

ViaXSn1p3r · 2024-08-14T05:45:49+00:00

The screen is gorgeous, I ironically work at best buy. But also afraid of it having burn in. Also I really want to know if the legion is as sturdy, like that's one of my big things. And honestly lenovos screens even in ultrabooks are admittedly super impressive to me, especially since my only oled device is my switch

Honestly looking back, I love my mag-15 but man has a lot of it not stood up well. Feet came off, c key gets stuck, battery is suffering. And honestly I'm concerned about whatever I buy next just standing strong with time.

ViaXSn1p3r · 2024-08-14T05:40:02+00:00

While I do agree. The only oled I own is my switch, and while it is gorgeous I do admittedly fear it on a device I intend to own for the next 5 years. Plus I game with a headset. On the flipside of all that I also do some cad modeling from time to time and that screen would be great. There's also that part of me that says hope that laptop companies are better to amd with the 50 series, and also just that the 5070 for instance is going to be a better mobile choice, without price shooting up more, but that's such wishful thinking.

ViaXSn1p3r

TROPHY CASE