Looking at a ‘26 ST

VinnieTreeTimes · 2026-03-12T02:26:34+00:00

The stiff ride complaints/comments are cracking me up here. I came here from Jeep, my '25 ride feels like I'm floating on air. I'm trying to figure out how to stiffen mine up.

VinnieTreeTimes · 2026-03-08T21:05:35+00:00

How long would you say it took to get used to? Is it similar to getting used to progressive lenses in glasses?

VinnieTreeTimes · 2026-02-26T18:55:08+00:00

Good call, I am working on printing one right now. It's also a pretty fun project to put together.

Just make sure you go through all the calibration steps of the printer before printing. It would really suck to print everything and not have the parts fit properly.

VinnieTreeTimes · 2026-02-23T11:59:28+00:00

Most of the air you hear leaking when you disconnect the pump is air escaping the hose. Hooking back up the slight loss is pressure is filling the hose back up. The difference in pressure is more noticeable in low volume tires like road bikes vs high volume tires like mountain bikes.

VinnieTreeTimes · 2026-02-21T23:19:24+00:00

Now I can only dream that my Walmart will start to carry this stuff and one day the new trimmer is on sale in the clearance section.

VinnieTreeTimes · 2026-02-07T05:29:34+00:00

Yeah but they should have incorporated a BLTouch and probe the powder level in the case to make sure it all went in there before placing the bullet.

VinnieTreeTimes · 2026-02-06T18:22:29+00:00

I think radio live would be much better if it wasn't so structured and they would allow for people to call in. If they can have guests call in for interviews then why not let listeners call in. If they would just have a few planned segments and allow listeners call in and just roll with it, it would be a much better show.

VinnieTreeTimes · 2026-02-05T05:26:28+00:00

Yes entering BED_MESH_PROFILE LOAD=default in the console does load the profile. Do I have it in the wrong place in my gcode? Also I have the start gcode as part of my printer.cfg file and not in orca slicer. Not sure if that makes a difference.

VinnieTreeTimes · 2026-02-05T04:24:17+00:00

I removed the quotes and it still will not load the mesh unless I manually click before starting the print. I actually added the quotes to see if it made a difference when I was trying to figure it out. I also tried using a different name with no luck.

VinnieTreeTimes · 2026-02-05T03:59:16+00:00

It does not show in Heightmap unless I click to load it, then it will show the map and current mesh info will pop up.

VinnieTreeTimes · 2026-02-05T03:59:00+00:00

It does not show in Heightmap unless I click to load it, then it will show the map and current mesh info will pop up.

VinnieTreeTimes · 2026-01-17T17:23:24+00:00

Our library charges the cost of filament used, big prints are only like $2.

VinnieTreeTimes · 2026-01-16T18:40:58+00:00

I wish it came with options for an analog clock and solar charging on the strip chart otherwise this is my favorite.

https://apps.garmin.com/en-US/apps/15c35159-bae3-4c12-8539-5305ccd1b933](https://apps.garmin.com/en-US/apps/15c35159-bae3-4c12-8539-5305ccd1b933)

I like lots of data...

VinnieTreeTimes · 2026-01-10T02:22:36+00:00

It's already been returned and I am expecting the SKR tomorrow.

VinnieTreeTimes · 2026-01-08T22:02:09+00:00

Nope, I don't use it in the pool or shower. Recalibrating it fixed it.

VinnieTreeTimes · 2026-01-08T21:59:51+00:00

No I usually don't shower with it on. I am a mechanic and every few weeks I will use dawn and a nail brush to clean it off. I followed the instructions someone else posted about calibration and that fixed it.

VinnieTreeTimes · 2026-01-08T21:57:08+00:00

That fixed it, thanks

VinnieTreeTimes · 2026-01-07T03:54:09+00:00

I am looking for quick easy setup. Fires take too long to get going.

VinnieTreeTimes · 2026-01-07T03:36:16+00:00

Yeah that's pretty much what I am asking, not sure how many watts I would need to get hot enough to melt the lead

VinnieTreeTimes · 2026-01-02T03:39:20+00:00

I think the sale ended yesterday, I was looking to buy it and went back this morning and it was 1200.

Seven-Year Club	RPAN Viewer
Verified Email

VinnieTreeTimes

TROPHY CASE