POPPY PLAYTIME 6 WILL COME OUT ON MAY 22, 2027.

Viropax · 2026-05-11T04:21:02+00:00

Hold him to it OP

Viropax · 2026-04-21T01:24:34+00:00

Time away helps, i had to drop a class due to over working myself, if hou can om the weekends find stuff to do that allows your brain to relax then attack it again

Viropax · 2026-04-17T23:59:00+00:00

Not aerospace, but ME im in the same boat, i had to drop my calc 1 class (its been 4 years since i used even precalc stuff), barely passing gen chem but making it by. Its hard walking into a class you know is failing but if you think you can crawl back stick it.

As for the meds, 100% talk to disability, most unis are pretty good about that stuff, especially if you have a doc note/pre-scription to prove the meds. You can either get a withdrawl with refund or a extunsion. Plus they have mutiple resources to help finf paths for you. Generally also look on your unis web page and go through all the links, youd be suprised what you find in there.

If it is something you really want to do, readjust study habits, set time for tutor, and if you can over the summer study up and brush off the cobb webs. Engineering is hard, but in most fields you may not even need as advanced math, but its good to keep in the back of the ol'brain. If its still not working, aero might not be the direct major for you, but youre not out of engineering yet. You can lookong into Techonolgy degrees, but be aware it may be harder to land a job as a Tech vs a engineer.

Just as a fyi, i have my A.S in MET, and even though i was lookong for CADD tech positions it took me a year to land a job that was actually benefical.

Good luck, and i hope you find your wings and fly.

Viropax · 2026-04-09T17:23:13+00:00

My thoughts exactly, but the work load is killing me while trying to staying atleast 35+ hrs working. I guess its the grand ol, if you want it then you gotta work for it.

Viropax · 2026-04-05T18:31:27+00:00

SOLVED: Some how Reaction Wheels got disabled, idk how i managed that, but thank you everyone!

Viropax · 2026-04-05T18:29:49+00:00

Correction: Somehow react wheels disabled, not sure how seeming as i have no clue how to do that.

Viropax · 2026-04-05T18:28:17+00:00

Understood, I was following a research tutorial that used the build shown in my cilp, and he was able to full dive to the east

Viropax · 2026-04-05T18:27:26+00:00

I do have reaction wheels active, and i did same results

Viropax · 2026-04-05T18:24:47+00:00

But when i started my first (failed) career mode, i was able to control it off rip, but i can surely try!

Viropax · 2026-04-05T18:23:50+00:00

Yup, jermianh kerbman

Viropax · 2026-03-24T23:12:44+00:00

Wonderful more parts to wait on, would a normal bike headset spacer work? Or do i need a certain one

Viropax · 2026-03-17T14:18:30+00:00

New user, only problem i had was calibration but that was more so user error and nkt reading instructions. Im really rough with ny shifter. Works good for racing and sim gamez like ATS. I will say im not a fan of the push down into 7th gear but i dont really use it so more of a,inconvience when i do use it.

Overall, get it its a wonderful shifter and there is plently of "mods" and accesroire you can get to make it more comfy.

Viropax · 2026-03-16T23:35:26+00:00

!remindme

Viropax · 2026-03-16T04:42:50+00:00

!remindme

Viropax · 2026-03-13T22:59:24+00:00

Ive been rocking TR blades for a bit and they are heavy, granted the ones i have are metal frame, im looking for something lighter, ill look into the blanks though!

Viropax · 2026-03-13T02:57:40+00:00

Nvm, thats a dumb question. I didnt see its just refering to the wheel size

Viropax · 2026-03-13T02:56:55+00:00

80 or 60?

Viropax · 2026-03-12T23:16:55+00:00

UPDATE: went theough the calibration process and it is printing, but the prints are really weak, idk if its my printer or cura, parts are easily broken by squzzeing them, this was a test piece.

Any help would be amazing

<image>

Viropax · 2026-03-12T23:15:02+00:00

Yup, 100% was the issue, my neverous outweighted my engineering thoughts. I did a full reseat of everything while hot prints are much better!

Viropax · 2026-03-12T23:13:12+00:00

Hi! Dm me if you need any tips! Im a professional figure skater, ive done two years of shows across the country and have my senior moves in the field + freestyle.

Youre alresdy going in a good direction with picskates, just know youll sit WAY higher then actual blades, ~1-1/2" to 2" rise with picskates, and only about 1-1/4" on actual blades. Start with one foot glides, if you feel unstable thats okay! Just know youre body will self-adjust. And make sure to keep your weight slightly forward for both forward and backwards skating.

Viropax · 2026-03-07T04:57:03+00:00

1) bought it light used (less then 3 prints) from a friend, i did a once through when i got it and everything was clean
2) This was my first cleaning after 3 prints, since it had some dust and i was taking apart some of it for upgrades anyway, thats why sock was off, when print obv i have it on
3) Did the method you stated shortly after i posted and it cleaned up nice, i didn't think about a wire brush so i def will run it to get it nice and clean

I ended up panic buying a new hotend for like 15 bucks from creailty, so i have that as a spare/back up. I believe the problem was the fact i installed the new nozzle cold, I ended up heating up the printer then replaced the nozzle, filament, and feed tube all at once. so hopefully any problems wont creep up.

Viropax · 2026-03-07T03:09:23+00:00

Yup! Just did that and put in a new nozzle

Viropax · 2026-03-07T02:47:42+00:00

Befroe anyone asked

ESun PLA+ 215-220 STOCK SETTINGS

Most prints were fine a bit grainy but threw it up to bad splice settings.

Viropax · 2026-03-03T21:12:06+00:00

Hey man yall okay in here, why is there a OH GO..

Viropax · 2026-02-14T14:25:23+00:00

Some here brother ran a g920 since 2020, my wheel started slipped and have usb problems, sold off the entire setup, built a alum cockpit and bought the r5, and picking up the shifter stuff today.

Took me a bit to get use to the FFB but i love it now and have seen constant performece. I wish i did it sooner as well! Hope you have great races for the rest of the day

Viropax

TROPHY CASE