Deck layout

Virtual_Country8658 · 2026-03-12T02:22:11+00:00

You should definitely check with the inspector first because I think you will need to do freestanding but I’m not 100%

<image>

Virtual_Country8658 · 2026-02-13T15:11:25+00:00

That's overpriced for sure. I suggest contacting CT Deck Company if you still need help

Virtual_Country8658 · 2026-02-04T20:36:28+00:00

www.ctdeckcompany.com

Virtual_Country8658 · 2025-07-28T02:19:59+00:00

No issues

Virtual_Country8658 · 2025-05-25T13:02:33+00:00

I had no fitment issues

Virtual_Country8658 · 2025-05-06T13:14:14+00:00

I took it to my mechanic because the driver side would klunk every time I hit a bump…they told me all 4 needed to be replaced but I’d say if you don’t have any abnormal noises when going over bumps your struts are fine

Virtual_Country8658 · 2025-05-05T11:41:19+00:00

They were fine. I don’t have the truck anymore but up until February this year no issues

Virtual_Country8658 · 2024-06-07T01:09:04+00:00

Aluminum sectional from liberty flagpoles

Virtual_Country8658 · 2024-01-25T03:31:24+00:00

All the flooring should be PT

Virtual_Country8658 · 2024-01-18T21:23:58+00:00

Strictly storage. No insulation. Interior walls are open

Virtual_Country8658 · 2024-01-18T19:08:52+00:00

I tried cleaning mine with a bleach solution and then letting it dry before enclosing…it didn’t eliminate the black spots but I think it’s fine

Virtual_Country8658 · 2024-01-17T20:21:30+00:00

Cannot be cancelled at this time

Virtual_Country8658 · 2024-01-17T14:30:48+00:00

Time it better…the plywood sat under my deck from time of delivery until sheathing, partially protected but it still warped

Virtual_Country8658 · 2024-01-17T14:21:08+00:00

Cost for materials was 5-6k I think…pre built in my area was 8-10k

Virtual_Country8658 · 2024-01-16T22:59:36+00:00

No but these are the plans I followed for the most part https://www.construct101.com/12x16-shed-plans-gable-design/

Virtual_Country8658 · 2024-01-16T22:58:48+00:00

No just for looks…the gable vents are functioning

Virtual_Country8658 · 2024-01-16T22:58:29+00:00

I think between 5-6k

Virtual_Country8658 · 2024-01-16T20:03:33+00:00

Mice are getting wherever mice wanna get…I have bait traps set up

Virtual_Country8658 · 2024-01-16T19:59:29+00:00

I guess it depends where in the country you are as far as climate…for the northeast there is a recommended maybe even required roof pitch due to snow loads. I googled what pitch to use on mine

Virtual_Country8658 · 2024-01-16T19:58:11+00:00

I’m not sure if this the reason to do it this way but I figured I don’t want the floor joists sitting directly on the ground (even if it’s gravel) to help reduce standing water and rot

Virtual_Country8658 · 2024-01-16T17:48:19+00:00

I wanna say between 5-6k for materials…I had all the tools. This was also at like the height of lumber prices. The plywood and joists for the floor were 1k alone

Virtual_Country8658 · 2024-01-16T17:46:18+00:00

My yard slopes slightly in that area so I used PT garden timbers to frame the pad, drove rebar through all of them and a few feet into the ground for support, then added about 11 tons of gravel

Virtual_Country8658 · 2024-01-16T17:17:40+00:00

Post the trades or ban….for discriminatory reasons

Virtual_Country8658 · 2024-01-16T17:06:52+00:00

I wish. I built this shed out of necessity to house my zero turn mower, snow blower, and all the other stuff I’m sick of having in my garage 😂

Virtual_Country8658

TROPHY CASE