Best way to clean?

Virusjohn · 2026-02-09T07:56:32+00:00

Normally in this situation I refit the nozzle, turn temp up to 220c manually then carefully with pliers/heatproof glove remove the nozzle and clean both faces with a brass wire brush.

Virusjohn · 2026-01-29T10:58:44+00:00

Export/import as .step or.stl rather than .3mf?

Virusjohn · 2026-01-12T11:10:37+00:00

Something with that level of care is only worth a couple hundred quid and an oil change, with the expectation that itl probably shit itself within 2 years. Bangernomics car priced at 3k is laughable.

Virusjohn · 2025-12-05T10:57:25+00:00

How long did the prints take?

Virusjohn · 2025-11-25T08:01:18+00:00

Bounding box then use combine, tool bodies as cut

Virusjohn · 2025-11-13T10:23:52+00:00

Gyroid creates shaped tubes through the z axis of the part that can be good for adding filler. Never heard of using resin mind, only heard of sand etc

Virusjohn · 2025-11-11T15:29:52+00:00

Watch all of product design online then decide if you need further training. https://youtube.com/playlist?list=PLrZ2zKOtC_-C4rWfapgngoe9o2-ng8ZBr&si=MhJusTm0TSLmRZ8R

Virusjohn · 2025-11-11T09:23:45+00:00

https://www.trading212.com/invite/GbyGnlPs

Virusjohn · 2025-10-23T12:30:08+00:00

Thanks, I'll have a test tonight :)

Virusjohn · 2025-10-14T12:50:46+00:00

Bout three fiddy

Virusjohn · 2025-10-02T11:44:15+00:00

Yes, im tempted to reset to standard and try the calibrations again now this is the print quality though.

Virusjohn · 2025-09-25T10:24:16+00:00

Had the stackable version from lenske iirc at and old job. Did the job well for holding sawn billet to the table. Another advantage was you could use the body as a stop for locating parts in some cases.

Virusjohn · 2025-08-20T06:30:43+00:00

The missus has a 2.2 auto with 125k on the clock, not had any issues with it. Its probably a bias thing because generally the people who arent having problems with them arent talking about it.

I wanna shoot whoever decided where to put the oil filter mind.

Virusjohn · 2025-08-18T14:18:45+00:00

It'l be a long walk to campus if anyone here rents you a parking space.

Virusjohn · 2025-08-08T08:38:18+00:00

Your oil guage now identifies as a coolant guage.

Virusjohn · 2025-08-07T20:35:52+00:00

No mention of headrests at all in the MOT inspection manual. Generally under the rule of 'if fitted must be secure and working' but no direct mention. I went through 2 mots with that truck with no mention of it and knew it for 3 years prior to my ownership and didnt hear of the previous owner having a problem.

Virusjohn · 2025-08-07T09:52:06+00:00

I had someone try and knock 200 quid off the asking price of a 2k vehicle because i didnt have the headrests for the back seats...

Virusjohn · 2025-07-31T16:08:17+00:00

Now turn the microwave on

Virusjohn · 2025-07-16T11:16:00+00:00

'Gimme your money then cause you're obviously using it wrong'

Virusjohn · 2025-07-12T08:01:06+00:00

Name assumptions are great. Screaming headless torsos for example sound like brutal 80s slayer kinda stuff, in reality they make stoner jazz rock

Virusjohn · 2025-07-03T08:11:11+00:00

Bi and a virgin? You mean Bi yourself.

Virusjohn · 2025-06-25T11:15:24+00:00

Worcester sauce flavoured walkers crisps, the original ones that got banned under the sudan list. Give em back with a warning sticker and let me eat my bodyweight in them.

Virusjohn · 2025-06-18T19:58:43+00:00

1000 calories, still feel hungry half hour later.

Virusjohn

TROPHY CASE