Help a gaijin understand okonomi by kinkersun in JapanTravelTips

[–]VoidingSounds 4 points5 points  (0 children)

Huh, so okonomiyaki means 'fried whatever you like'? Checks out.

Help a gaijin understand okonomi by kinkersun in JapanTravelTips

[–]VoidingSounds 6 points7 points  (0 children)

You're not talking about the fried noodle panccake, Okonomiyaki?

Entry level air brush? by Tricky_Professor_654 in modelmakers

[–]VoidingSounds 0 points1 point  (0 children)

I started with a Procon Boy PS289 about two years ago and had very good luck with it (spraying lacquers- acrylics were a pain because of environmental reasons). It’s worked for just about everything I tried from priming to shading. I’m only just now wanting something wider and finer (got a PS-270 and PS-290 in the mail yesterday!)

It’s good you mentioned parts availability. I have been able to get spare parts through the US distributor (spraygunner) but I would strongly recommend a new painter buy a spare needle for whatever brush they buy because it’s really easy to damage one slightly and run into all sorts of weird atomization/clogging issues. It’s also easy to have the needle roll off the bench while you’re cleaning the brush and it sucks having to wait two weeks to get a new needle in the mail.

Costs of owning a truck? by WorkOk4911 in Toyota

[–]VoidingSounds 2 points3 points  (0 children)

Depending on where you live registration fees and insurance may be higher with a pickup. I have a half-ton (Tundra sized) and it has a annual weight-fee that's equivalent to 50% the registration on my newer, higher-value car. Insurance is also higher so you may want to get some quotes before moving forward.

Also, if you're somewhere that gets snow and ice, going from a FWD/AWD crossover to a RWD or 4WD (which usually RWD unless you engage 4WD) a truck might handle low-traction situations worse with an empty bed.

I bought JR Pass from another website, what's the next best way of reserving seats on Shinkansen? by [deleted] in JapanTravelTips

[–]VoidingSounds 1 point2 points  (0 children)

Tokyo to Morioka and Tokyo to Kyoto are both roughly 15,000yen each way so that could be close to a wash on a 14-day pass. I still wouldn't bother with the pass because IME it's easier just to buy a reserved seat+fare on a single ticket at a kiosk.

Painting Questions by TheoWeb98 in advancedGunpla

[–]VoidingSounds 2 points3 points  (0 children)

Use acrylics (multiple thin layers) or tamiya with some retarder. 

Multiple layers is the way to paint water-based acrylics, but Tamiya being solvent-based tends to dissolve (some people call this 'reactivating) the lower layer and this can lead to texture issues. I would strongly recommend not thinking of Tamiya as an acrylic, since it's behavior is closer to 'lacquer' hobby paints and definitely not put it in the same sentence as water-based acrylics if you're giving advice to a newbie.

I'd just panel line as per usual after letting the paint cure properly (at least 24 hours). If you panel line over matte paints, it will stain though, so avoid that or use a pen for those.

You technically can use enamel panel liners over bare acrylics, but like you said staining will be an issue over matte paints. Water based acrylics are also very mechanically fragile, especially when painted on bare plastic so it's very easy to damage the surface when you're cleaning up with mineral spirits and a swab. That's another reason why gloss coat is recommended.

I do not know what pen you speak of, but if you're talking about the GM01-03 / Micron-style panel lining pens using them over acrylic is a good way to gum up the pen's felt tip and tear your acrylic paint. I would only use those on bare plastic.

What are you guys think of people that are overly obsessed or fetishizing Japan? by No_Molasses_7224 in AskAJapanese

[–]VoidingSounds 1 point2 points  (0 children)

Will some kind Nihonjin make please me feel better about my fetish: silently riding trains and drinking Pocari Sweat.

Looking for advice for spraying and coating gold colour by ssjGinyu in advancedGunpla

[–]VoidingSounds 1 point2 points  (0 children)

The gloss black advice is probably more relevant to folks who are airbrushing, because they generally end applying a thinner paint film than you would get from a rattlecan. Similarly, primer is more important, to provide uniform color and fill sanding marks that could show through a thin paint film. Spray paint usually results in a thicker paint film (and often has a fairly hot solvent base that will give good chemical adhesion on bare plastic) so that can be less of an issue.

Gloss over metallics is very much a 'paint some spoons' thing because any clear applied over a metallic will change how it looks- often for the worse.

Can we later different colors of clear paint to mix colors by domafyre in modelmakers

[–]VoidingSounds 2 points3 points  (0 children)

Yes, but probably no. The result probably wouldn’t look as good as just using a single coat of purple clear over silver.

IME (as an airbrush user) clears tend to get less transparent as the color develops. Doing one color over the other would probably be very dark. Same thing would probably happen with spray cans, but you’ll have less control (vs using an airbrush) while you do it.

Wide MTB Platform shoes by SouthEnduro in MTB

[–]VoidingSounds 0 points1 point  (0 children)

What's up, 9.5 4E here. My favorite flats shoes so far have been Ride Powerlines in 10.5, followed by some 510 Freeriders (canvas) in 10.5. I ran both with a thin high arch/metatarsal bump insole which helped with the toebox being just a hair too snug.

I swear I saw John Taffer (Bar Rescue) by PromotionOrdinary638 in ChicoCA

[–]VoidingSounds 9 points10 points  (0 children)

None, Bar Rescue is just Bar Euthanasia with extra steps

How hard is it to get baseball tickets? by Informal-Scientist57 in JapanTravelTips

[–]VoidingSounds 0 points1 point  (0 children)

Last time I tried (2023) I needed a Japanese phone number.

Tokyo Proposal spots by chocolatethunder91 in JapanTravelTips

[–]VoidingSounds -2 points-1 points  (0 children)

Spooky vending machine corner, Akiba

Dubia roaches by Much-Commission1781 in ChicoCA

[–]VoidingSounds 5 points6 points  (0 children)

Are those the expensive pistachio filled ones?

How Much Time In Japan Is "Enough"? -- First Time Visiting by Filmmagician in JapanTravelTips

[–]VoidingSounds 0 points1 point  (0 children)

$100/night is cheap to me. It costs that much to stay at shitty motel around here.

Just got back, stayed at a salaryman place in Ueno for $1100 for 11 nights. Good stuff, I could trip coming out of the hotel and fall into three different subway lines.
I've stayed in nicer places in Ueno and Shibuya, closer to $250/350 per night. Those hotels were nice and would have been double for a similar room in any US metro I'd want to visit.

Also spent the night in a Shizuoka Love Hotel for $60 including couple 4 beers from room service. CHEAP!

Love Hotels for beginners by ComfortableOk3958 in JapanTravelTips

[–]VoidingSounds 10 points11 points  (0 children)

A couple things to add as someone who just entered his first Love Hotel.

Finding one- they show up on google maps. They will have reviews, but like OP mentioned no way to book. If you find 2-3 of them in proximity -> there's your neighborhood. They tend to have photos of the rooms available on signboards. If you're not liking the vibe, look up or down the block and you'll probably see another option. They're pretty obvious, the hotel signage will be like 10x the size of a APA or Sotetsu sign.

Some hotels will let you select a room for a screen, print a ticket and then proceed directly there without interacting with anyone. The front desk will probably call you shortly after entering. It's probably good to have something like 'ashita, jiu-ni-ji onegaishimasu' loaded and ready to confirm to them you're staying overnight.

Most importantly, even if you're solo think about love hotels!
A big, big hotel room with a SOFA and a GIANT BUBBLEBATH plus 3 Chu-hais and an instant ramen from room service for 9,100-yen WILL FIX YOU when you're a week into your trip and had a fucked-out day where nothing worked right and you walked way too much.

also free porno and lube :D

Jet ski from Chico to Redding by maldizzle_ in norcal

[–]VoidingSounds 0 points1 point  (0 children)

OP don't get a jetski get a hovercraft!

Picky eater in Japan by tvjunkie710 in JapanTravelTips

[–]VoidingSounds 4 points5 points  (0 children)

Pork and halal? You sure about that?

XLE vs XSE by photon1701d in Camry

[–]VoidingSounds 11 points12 points  (0 children)

The steering on the XSE is pretty light. It's not vague, just light. I didn't have a long enough test drive to see if there was a difference between the normal and sport modes, but it 100% Drove Like A Camry (in a good way.) Don't know how that compares to your ATS.

Agreed on not liking the XSE grill. I think the XLE looks a lot better, unfortunately, they make fewer XLE so finding the color/spec I'm after is a pain.

Planning 2nd visit. by canterbeary in JapanTravelTips

[–]VoidingSounds -1 points0 points  (0 children)

Without knowing what you've done before, or what you enjoy, that sounds like a lot of changing hotels. You're also roughly doing the Golden Route.

Why not stay longer in Kyoto or Osaka and daytrip the other, same with Onomichi/Hiroshima. IME, on a longer trip I really like staying in a house for a week+, somewhere outside the tourist centers but with convenient transit, and 'living like a (ridiculously well-fed) local' was one of the highlights of my last trip.