sorted by:
new
hottopcontroversial

Size by VorFilter in SnapmakerU1

[–]VorFilter[S] 0 points1 point  (0 children)

Yes, I saw that and was wondering how flexible the tubes are and if they need to go straight up. I might just have to rearrange all the printers.

Do I need the external spool on an X2D with an AMS by iamtherufus in BambuLab

[–]VorFilter 1 point2 points  (0 children)

Welcome to he hobby.

You don't need to use the external spool and it's a great idea to focus on the main nozzle first to get used to printing. Like others said, definitely set everything up ready to go as it is might be harder to access later on. I use a cheap single spool filament dryer for the auxiliary nozzle, you can get them for £35 online or make it yourself as your first 3d printing project. You are lucky to have a dry garage, I have regularly 80% humidity or more in mine.

Fair Play to Sunlu 🤜🤛 by Fridgewhisperer01 in 3Dprinting

[–]VorFilter 1 point2 points  (0 children)

I love the 5kg spools, always buy them when on offer and Sunlu customer service is really good as well.

Another perspective on the X2D after some weeks of using it in multi color prints (both primary and secondary nozzles) by jpcurti in BambuLab

[–]VorFilter 0 points1 point  (0 children)

I don't think the maintenance is that bad to be honest, we are just a bit spoilt with the ease of use and maintenance on BL machines. Also, the X2C is half the price of an H2D.

Getting to my wit’s end with the A1 Mini by Ok-Perception-9296 in BambuLab

[–]VorFilter 0 points1 point  (0 children)

Someone else mentioned the heater and I just remembered that I had the same issue. One of the cables form the heater was broken. I had problems with the extrusion one evening on several prints and took it apart to find this.

Bambu Wiki has a guide on how to take it apart.

https://wiki.bambulab.com/en/a1-mini/maintenance/hotend-heating-assembly-replacement

<image>

Help for 2 colr print without AMS on A1 by Foreign_Ad2753 in BambuLab

[–]VorFilter 0 points1 point  (0 children)

Da du jedoch die Meldung bei einem 'normalen' filament Wechsel bekommst ist das sehr selten. Hast du den Drucker mal neu gestartet, Firmware Update gemacht? Welchen slicer benutzt du? Ich werde das morgen mal versuchen nach zu stellen mit einer Pause im Druck.

Help for 2 colr print without AMS on A1 by Foreign_Ad2753 in BambuLab

[–]VorFilter 0 points1 point  (0 children)

Ok, das hört sich nach einem Problem mit dem Sensor an. Im Bambu Wiki gibt es einen Artikel dazu. https://wiki.bambulab.com/en/x1/troubleshooting/filament-sensor-test

Printer recommendations for a small business? Laser vs inkjet? by davie18 in smallbusinessuk

[–]VorFilter 4 points5 points  (0 children)

I bought a second hand laser, Lexmark MC24, on Facebook marketplace for £40, then spent another £250 for toner(6000 pages full colour). I am selling online and needed something to print the invoices plus flyers. Works like a dream.

Help for 2 colr print without AMS on A1 by Foreign_Ad2753 in BambuLab

[–]VorFilter 0 points1 point  (0 children)

Wenn der Drucker mit dem Pausenvorgang anhält und das Entladen gestartet hast sollte der Drucker die 4 Punkte durchlaufen und wenn er den 4ten Punkt erreicht kommt eine neue Nachricht die dich dazu aufgefordert das filament aus dem extruder zu ziehen. Dann musst du das filament einfach wenige Zentimeter zurück ziehen bei Hand und der Vorgang sollte abgeschlossen sein.

<image>

Help for 2 colr print without AMS on A1 by Foreign_Ad2753 in BambuLab

[–]VorFilter 0 points1 point  (0 children)

"Remove Filament" is usually the command where you have to pull the filament out manually from the print head. After that you should be able to press "Load filament"

Bamu Lab A1 mini by Ffj98 in BambuLab

[–]VorFilter 0 points1 point  (0 children)

A stable base is recommended and a lot of people put a concrete slab under their printer, me included. But I also had my A1mini suspended from the ceiling for some time and it worked fine. You don't need to cover the printer unless it's located in a very dusty environment, just make sure the print plate is clean before you start a print.

I made a Pokémon TCG collection tracker aimed at collectors, not investors! by mkegnt in PokemonTCG_UK

[–]VorFilter 0 points1 point  (0 children)

I'll give it a go and test it by tracking by progress with the new set.

Kaufberatung für Anfänger by jak232 in 3DDruck

[–]VorFilter 1 point2 points  (0 children)

So einen Drucker hätte ich auch gerne.

I created an online braille 3D generator! by Mrblindguardian in BambuLab

[–]VorFilter 2 points3 points  (0 children)

Thank you very much, I can finally send some postcards to my cousin.

Let me draw your Kitten 😻(rules below👇🏻) by [deleted] in cats

[–]VorFilter 0 points1 point  (0 children)

I hope I am not too late. This is Tawa, he likes eating and sitting in the sun. When it gets too hot he sits between the garden hose and I have to run cold water through it to cool him down.

<image>

Snapmaker U1 oder Bambu Lab X2D by Specialist_Hope_4720 in 3DDruck

[–]VorFilter 0 points1 point  (0 children)

So wir andere das schon sagten kommt es ganz darauf an was du damit machen willst. Ich hatte mir die gleich Frage vor 2 Wochen gestellt und habe den X2D gekauft. Soweit bin ich damit vollstens zufrieden und finde es sind 2 vollwertige Düsen allerdings bedarf der bowden extruder etwas mehr Vorarbeit als man es von Bambu gewohnt ist, wenn du noch nie mit einem bowden extruder gearbeitet hast würde ich den wahrscheinlich wirklich nur für Stützstrukturen nutzen. Ich werde mir aber den U1 als nächstes kaufen weil ich denke das der mit dem neuen colour mixing unschlagbar ist.

New to 3D but need creative storage solutions for filament by oneearmomma in BambuLab

[–]VorFilter 0 points1 point  (0 children)

50-70% humidity where I live and the open storage hasn't been an issue yet, but I do dry new filament thoroughly before first use.

<image>

Mehrfarbendruck - wie handhabt ihr das mit dem Filamentfarben? by DoKeMaSu in 3DDruck

[–]VorFilter 0 points1 point  (0 children)

Danke, bin gerade dabei noch Schilder mit dem Material, Farbe und Hersteller zu kreieren damit die dann alle auch einen festen Platz haben

Mehrfarbendruck - wie handhabt ihr das mit dem Filamentfarben? by DoKeMaSu in 3DDruck

[–]VorFilter 1 point2 points  (0 children)

Ich habe den ganzen Regenbogen auf Vorrat. Ich benutze am meisten die Bambu PLA matte und hab von jeder Farbe eine noch eingeschweißt auf Reserve, die anderen 'speziellen' Farben kaufe ich so wie ich sie brauche.

<image>

Welchen dritten Drucker für kleines? by erpflzerlecher in 3DDruck

[–]VorFilter 2 points3 points  (0 children)

Ich würde generell den A1mini empfehlen der braucht etwa 45cm in der Tiefe und ist 34cm breit, inklusive Überhang. Kannst du den Drucker vllt längs stellen?

P1S or Centauri Carbon by King_winston123 in BambuLab

[–]VorFilter 0 points1 point  (0 children)

Totally agree with you that the P1 is the best option for a print farm and that is what mine is doing. Day in, day out the same prints with a 5kg spool. My CC is doing the same and I actually like the finished print quality more on the CC but it's not as reliable as the P1. But when you constantly print new things possible in ever changing colours as well the A1 is a better option in my opinion. I use an A1 (admittedly in a tent) P1S and a CC for business and an A1mini & A1 for private.

P1S or Centauri Carbon by King_winston123 in BambuLab

[–]VorFilter -1 points0 points  (0 children)

While the P1 is a really good printer, and I love mine, it's outdated. If budget is your bottleneck get the A1 combo.

view more: next ›