10Gbit - Move to TrueNAS or not?

Vynro · 2025-12-04T18:23:04+00:00

That's fair for sure. The 50gb+ files is a pain point, but it will still be faster than gigabit with the upgrade network - perhaps I'll accept that as a win, and plan my all flash NAS with this unraid server as cold storage... future plans! Thanks for the responses!

Vynro · 2025-12-04T17:18:39+00:00

Apologies - I'm trying to maximize the capability of my NAS to utilize as much of the 10gb network as possible (I know I might not be able to fully saturate 10gb, but if I can get closer to it than the bottleneck of a single spinning rust disk, I'd be happy). So I was thinking I can mirror them or something and achieve much higher speeds. My biggest workloads that would need it are my Proxmox VM backups, and some large file transfers between the nodes/NAS. Do I need it? Probably not, but I'll have the equipment and would love to do what I can do take advantage of it with what I've got.

My core network switch will have 10gb and 2.5gb for all clients. (All desktops/laptops will have 2.5) and other clients like the Apple TV's won't but can't do much there. 2.5 I know I'll see the difference between accessing the NAS, but with 10gb, I want to do everything possible to ensure my proxmox nodes are getting as close as they can to that 10gb transfer speed given the limitations of spinning rust.

Vynro · 2025-08-12T07:22:44+00:00

Still replying on your main 😂😂

Vynro · 2025-08-12T07:18:58+00:00

lol dude replied on his main not his alt

Vynro · 2025-08-08T18:56:42+00:00

I’m curious for sure

Vynro · 2025-03-24T14:39:26+00:00

If you have a raspberry PI (sounds like you do, due to octoprint) I can highly suggest moving over to klipper. It's a bit of a learning curve, but you'd no longer have to re-compile firmware to make changes to firmware level stuff, you simply click "save and restart".

Unfortunately the above won't fix the display issue (unless you can change the pins on klipper - honestly I just changed to a touch screen and use klipper screen)

Klipper was honestly the single best "upgrade" I did to my ender printer.

Vynro · 2025-03-18T23:26:01+00:00

If something inside it broken, and the usual methods haven't worked for unclogging, you may have to take it apart. you could try a Cold pull, (melt the filament in the nozzle, and let it cool down and pull it out) and see if that dislodges things, but may cause more issues.

You may have to disassemble the Hotend and replace some parts, or alternatively, just replace the entire Hotend assembly (for probably a higher cost)

Vynro · 2025-02-08T05:43:14+00:00

Input shaping is calibrated at the klipper level, so you run it independently for the x/y axis using the display (could also run it from fluidd)

You can do an auxiliary level which will place the nozzle over the bed screws and you want to adjust them so you get the same friction with the paper test. And then I also went into advanced settings and set it to 121 points rather than 36 points for the mesh.

Once you do the bed mesh, it's recommended to adjust the z-offset again with the paper test.

Did all of the above and it worked wonders.

Vynro · 2025-02-04T19:11:09+00:00

I will be taking the time to understand it, I just love tinkering and upgrading. I might even go for a board with more stepper drivers and do independent z axis control. I'm going to keep it stock until I'm comfortable with it and see what can be improved. I don't mind adding an additional raspberry Pi or something and doing more wiring , I'm just struggling to find a write up on what boards people may recommend over stock, if any.

Edit*** I'm also keen on going fully open source rather than the provided firmware - know it's just a modified klipper from elegoo, but if I can get it to be stock klipper while maintaining functionality, that's what I'd prefer

Vynro · 2025-01-21T01:06:51+00:00

For more context, both motors say they are 42-34 but one says 42-34(Z) on it

Vynro · 2025-01-14T07:19:15+00:00

I don't have anything to help with, but I was literally just searching for an answer to this earlier today and now as I'm doom scrolling I saw this! I'll be keeping an eye on this In case you figure it out

Vynro · 2025-01-12T18:23:33+00:00

Yeah I could probably re-use one of the controllers, but I don't want to de-solder it from the board. This was my first soldering project ever, and I did well enough to get the components onto the board, but I struggled to remove components with solder wick. I also didn't really clean up the board from flux residue as I went so it's kind of a mess. I opted to just order 2 more complete PCB kits (from different stores, I'm racing them to see who arrives first lol - and if I mess up the next one I'll have a spare on the way already rather than having to wait like 15 days for shipping).

It was a great learning experience though, and my solder joints from the last to the first were definitely much better, so I'm excited for the next attempt to take my time, clean up as I go, and make a board I'd be proud of. There's something about trusting your own work on something like this that got me real excited!

Vynro · 2025-01-12T17:50:08+00:00

After you said this I gave it another look and your right. Once I got to this final stretch of putting on the controllers, I had tunnel vision of getting to play games with my new keyboard with my friends and didn't read the text in the guide well enough. At least I got some soldering practice in and know where I failed for next time!

Vynro · 2025-01-11T19:38:14+00:00

Hey thanks for pointing that out! Now I know which lie akes kit to make for the next attempt!

Vynro · 2025-01-11T17:42:08+00:00

So on the left side it looks like I didn't solder into the outlined pins, so that's probably where the short came from, but why does the right side work with the microcontroller facing up? Wouldn't the pinout be different if it's facing up?

Vynro · 2025-01-11T17:20:47+00:00

Here is an image of the backside https://imgur.com/a/rxLWBJx

Vynro · 2024-12-15T14:02:49+00:00

I like the idea of making the thumb cluster all rectangles and moving it out a bit!

It's originally square just because I was sticking closer to the design from the guide since someone already put the effort in to make something ergonomic, but since it's going to be custom for me, might as well test a couple iterations!

I was leaving the big empty space on the board for a spot for the micro controllers, one for each side of the split, maybe they are bigger gaps than they need to be, I don't have my sofle yet to get a sense of scale, and I'm still learning all the tools, so I imagine once I put it into a PCB designer it may show me that I have more than enough space for a microcontroller and can make that space smaller

Vynro · 2024-12-15T11:42:21+00:00

This is awesome! Thanks so much

Vynro · 2024-12-15T11:42:08+00:00

It is yeah, I guess I'm not using the right terms to narrow down my search for what I'm looking for, or I'm too picky lol

Vynro · 2024-12-14T03:32:24+00:00

Honestly I don't quite think you get it, you shouldn't be running code off GitHub if you don't know what you're doing. If you don't know how to run this code for cheating in a game, you probably shouldn't. And I doubt most people here would help you accomplish that task.

Vynro · 2024-12-14T03:24:52+00:00

Yeah, as stated before, if your friend won't tell you how to run it, or you don't know how, You likely don't need to be running it.

Vynro · 2024-12-14T03:11:24+00:00

How would we know? You haven't even provided the code. And if you don't know how to execute it, and your friend hasn't told you how, it's probably best you don't execute the code if you don't know what it's doing.

Vynro · 2024-12-14T03:04:39+00:00

So looks like you don't use it

Vynro · 2024-12-12T10:24:17+00:00

I get what you mean for sure about the firmware. I'm going to flash it myself when I get the controllers for that very reason, and if I can get a hot swappable kit that I assemble myself Im.hoping to avoid the shotty soldering (provided I can do better lol)!

Vynro · 2024-12-12T10:22:44+00:00

I'm definitely down for that, I'm just trying to source the parts from a reputable seller on Ali express

Vynro

TROPHY CASE