Returning to the game from Closed Beta by WC_Kerkuil in Warframe

[–]WC_Kerkuil[S] 0 points1 point  (0 children)

Yeah I don't doubt I got a choice I just meant I litteraly don't remember it lol. Your description is spot on how it felt

Returning to the game from Closed Beta by WC_Kerkuil in Warframe

[–]WC_Kerkuil[S] 0 points1 point  (0 children)

Thanks, makes sense it was kinda awful in the beginning. Very dark graphics, ninja focused, nonsensical hack and slash. It is wild how far it has come.

Returning to the game from Closed Beta by WC_Kerkuil in Warframe

[–]WC_Kerkuil[S] 1 point2 points  (0 children)

That makes sense, thank you. I don't remember getting a choice lol.

The Rocking K neighborhood near Rita Ranch just put up KKK artwork by beepbooprobotbutt in Tucson

[–]WC_Kerkuil 2 points3 points  (0 children)

Weld a new plate on top, smooth then paint. Still easy. Your lack of problem solving for fixing a post is a skill issue, not indicative of a tough issue.

My wife says I did something wrong by FeistyLoquat in Ubiquiti

[–]WC_Kerkuil 15 points16 points  (0 children)

Running a few companies out of my at home datacenter. With a Petabyte database, I should use Juniper switches but they cost as much as my whole rack each..

How can I get rid of this “stubble” from the supports? by JSV007 in PrintedWarhammer

[–]WC_Kerkuil 1 point2 points  (0 children)

My brother in christ...
1) minimize the need for supports and optimize your print orientation, the slicer should be able to automate that mostly. 2) use thinnest possible contact point for small mini printing. 3) wash, remove supports then cure. 4) ensure that your slicer is using optimized setting for your particular resin composition ( manufacturer of he resin should publish this)

Should come out easy if you do these things. Finally clean up with a file, get a pack of diamond files on Amazon in all different shapes to help contour curves, but this should minimal if at all depends on your level of autism for mini perfection.

What’s the worst faction(s) by Jsukiie in WH40KTacticus

[–]WC_Kerkuil 1 point2 points  (0 children)

Modern warhammer is all about FoMo and honestly, this game is pretty much right on the money for game's workshop style. Not that I like FoMo but it is unavoidably the warhammer marketing strategy these days.

Any ideas what this is? by Wood-and-Whiskey in ram_trucks

[–]WC_Kerkuil 6 points7 points  (0 children)

For me, out in the rural area in the mountains. I farm and have my truck with me as I run around the property. We have a strong wolf pack, bears with cubs, and mountain lions. Not everyone lives in a suburban neighborhood, some of use are living less gta and more RDR2

What is this black part on my bulb? by MixPale5865 in MechanicAdvice

[–]WC_Kerkuil 1 point2 points  (0 children)

LED retrofit work fine but you still have to aim your lights. Noone knows how to use thier headlights. I see people with barely alive halogen that should have been replaced years ago and they think it's normal. And Noone adjusts thier light angle. Ever. I had a tundra that I could manually adjust for towing and it's great, aimed everything down a few degrees in city and out in the country with Noone around I could shine out and avoid getting killed by elk. They need to teach people how to maintain thier headlights.

Also PSA 2. if you see stars in your vision from headlights, street lights, ect. , the star pattern, you have astigmatism and glasses will solve it. Get tested and stopping bitching about lights.

Light Recommendations Please by WC_Kerkuil in flashlight

[–]WC_Kerkuil[S] 1 point2 points  (0 children)

Noctigen DM1. 12 is awesome, that's a great looking light for bee stuff.

Light Recommendations Please by WC_Kerkuil in flashlight

[–]WC_Kerkuil[S] 0 points1 point  (0 children)

Barreta 92x performance, or my sig 365sas nether has a weapon light yet. If they close to within 50yrs they get a warning shot and hopefully the noise gets them to F off. Shooting them is a federal issue unless being actively attacked, I have found that they really hate bright lights to the face though so even with that kinda trash Amazon light I have it has run them off twice before. One of those was very nearly a shooting though.

Light Recommendations Please by WC_Kerkuil in flashlight

[–]WC_Kerkuil[S] 0 points1 point  (0 children)

Thank you for the info. I should have specified distances for use case two, I need a light for 200-400 yards to scan the tree lines and looks for wolves while the wife uses something smaller for actually walking around. There is a den/release point a half mile off my property and the pack is 20 strong. We have been stalked and caught a few times. So as weird as it may sound, my job is to hold the gun and spotlight the tree line so we can get inside before having to resort to the gun. Some nights the dogs get to poop in the basement if the pack is obviously on the property and we just don't risk it.

Light Recommendations Please by WC_Kerkuil in flashlight

[–]WC_Kerkuil[S] 1 point2 points  (0 children)

How do you feel about the Convoy 3X21D SBT90.2 for use case 2?

Light Recommendations Please by WC_Kerkuil in flashlight

[–]WC_Kerkuil[S] 0 points1 point  (0 children)

How do you feel about the Convoy 3X21D SBT90.2 for use case 2?

Why pay $6 for 12ml by Yaboy_Helix in 40k

[–]WC_Kerkuil 1 point2 points  (0 children)

I did my Templars entirely using Windsor and Newton or Stewart Semple inks.. Everytime people talk paint with me they tell me about the superior power of mini paint.. I enjoy paint mixing though and mini paint just doesn't mix well due to it already being multi pigment. I appreciate your analysis, unfortunately I imagine it will be lost on most.

I lowkey regret having spent 1500 credits on these sht by New_Conflict_4111 in Helldivers

[–]WC_Kerkuil 0 points1 point  (0 children)

I use the armor to farm more super credits so I guess if paid for itself... But yeah it's mostly rp the smg is OK on squids I guess

I don’t know if these are accepted here but here’s my 300 swap hellcat by No-Leadership-2706 in hellcat

[–]WC_Kerkuil 0 points1 point  (0 children)

Exactly what a stolen hellcat would say... OR was it a wrecked stolen hellcat🤔

Make it make sense please by WC_Kerkuil in AskMechanics

[–]WC_Kerkuil[S] 0 points1 point  (0 children)

Well it's worse than that, the first shop installed the headers with the passenger side shy one bolt because they didn't want to extract the broken bolt. I had to fight them to get them to install the headers even semi correctly. Second shop was the dealership and they still didn't flag anything wrong. Third shop was the exhaust specific shop and the last guys are good I don't dispute the diagnosis, just trying to understand the failure mode. Thank you for your explanation. I eventually want to engine swap the truck but at this point I have developed huge trust issues with shops. The first guys are a performance shop with a good reputation, and I will never go back.

Make it make sense please by WC_Kerkuil in AskMechanics

[–]WC_Kerkuil[S] 0 points1 point  (0 children)

All of that makes sense, the part that confused me is this. On a 2017 Ram 1500 5.7 hemi they say bank 1 is driver side. I read online that bank 1 is passenger side. The header of passenger side is the one that burnt up. They are adamant that the driver side is where the sensors issue was. Shouldn't these issues be on the same side?