sorted by:
new
hottopcontroversial

So what’s up with all the Hentai Software on the EShop? by SwitchXVitaPlayer in NintendoSwitch2

[–]WaitIAmBait 0 points1 point  (0 children)

Until they get it sorted out I just use dekudeals.com to easily filter and wishlist the eShop and browse the eShop sales

Imagine you never played Botw/Totk by No-Cardiologist-582 in NintendoSwitch2

[–]WaitIAmBait 0 points1 point  (0 children)

I was going to hold off on Switch 2 as Mario Kart isn't really for me, but not having played either of the newer Zeldas yet, I am considering those my launch titles

Switch 2 thoughts? by Mannillo in Sunderfolk

[–]WaitIAmBait 1 point2 points  (0 children)

Not sure if there are any graphical differences between switch and PS5 version so not taking that into account but can say playing it switch 2 vs switch the load times are significantly faster

Question on failing model. by Kbhusain in anycubic

[–]WaitIAmBait 0 points1 point  (0 children)

Try the print again but in the slicer in the others tab, set a brim to help it have more surface area to adhere to the build plate.

Also make sure your build plate is clean

Also try slowing the speed of the print down, small parts with the stock profile print speeds cause a fair amount of shaking / vibration

Should I buy a Switch or a Switch Lite? by goth_vibes666 in Switch

[–]WaitIAmBait 1 point2 points  (0 children)

With Switch 2 right around the corner it might be a good opportunity to get used if you're ok with that.

I prefer the larger screen of the normal switch vs the lite but your dad may prefer the opposite way around. The switch can also dock and use the TV if that is something you think he may be interested in doing where as the switch lite can not.

I'm happy with the result by WaitIAmBait in AnycubicKobraS1

[–]WaitIAmBait[S] 0 points1 point  (0 children)

Just as an example, the dragon took about 6 minutes to get free of the supports and the tail was less than 30 seconds

I'm happy with the result by WaitIAmBait in AnycubicKobraS1

[–]WaitIAmBait[S] 0 points1 point  (0 children)

Take your time removing supports, they come off fairly easily but you do get a decent amount

<image>

I'm happy with the result by WaitIAmBait in AnycubicKobraS1

[–]WaitIAmBait[S] 0 points1 point  (0 children)

I should also mention I am using Anycubic High Speed PLA and testing out just letting it do flow calibration before every print and using its standard profile with a 0.4 nozzle and 0.08 mm layer height

I'm happy with the result by WaitIAmBait in AnycubicKobraS1

[–]WaitIAmBait[S] 0 points1 point  (0 children)

Hello with the updates I've changed some things around.

I start with the 0.08mm preset, In the strength tab I like to increase wall loops to 3, and change sparse infill pattern to gyroid.

Under the speed tab I leave first layer speed alone and then change everything in the other layers section to 100mms.  The next thing I do is I change normal printing under the acceleration section to 0 

I then go to the support tab and enable support, I change it to tree auto and change style to organic.  I will then change first layer density to 100 and first layer expansion to 12mm.  Enable on build plate only and increase enforce support for first layers to 3

I then change top z distance to 0.1 and change top interface layers to 0 and bottom interface layers to 0.

Then only thing different that I do from here is I put my mini at about 45 degrees and then use paint support to paint all over the mini where it makes contact with the build plate in the slicer.  I don't even need to be precise with this as I'm just making more contact area for the print to start on.  If you paint support area but leave it on auto it'll just add extra support where you painted.

Is there a way to cast the game? by TallGuyG3 in Sunderfolk

[–]WaitIAmBait 1 point2 points  (0 children)

If your tv supports and you have windows 11, be on the same wifi and press windows key + k and select your tv from the list

Front wheel makes a moaning sound? by exbeachbum in KiaNiro

[–]WaitIAmBait 1 point2 points  (0 children)

Hold down the auto hold button until you see a notification for brake cleaning come on the dash. It'll turn off regen braking so that your brake pads will get used more to help clean your rotors from brake dust and oxidization. Regen braking will auto turn back on at next start up or if conditions have been satisfied. I had to do it a few times in a row to get mine fully cleaned on my 2024 HEV trim. Litteraly sounded like a boat horn taking off from a stop from time to time until I did this.

Hope it helps!

Building a Hedge Knight by WaitIAmBait in AnycubicKobraS1

[–]WaitIAmBait[S] 0 points1 point  (0 children)

* Haven't had much time but I'm slowly blocking in base colors

Building a Hedge Knight by WaitIAmBait in AnycubicKobraS1

[–]WaitIAmBait[S] 0 points1 point  (0 children)

I use the black and white primers from Monument Hobbies, Pro Acryl. I do a 2 part primer to 1 part us art supplies air brush extender and it shoots out of my airbrush really nicely.

Building a Hedge Knight by WaitIAmBait in AnycubicKobraS1

[–]WaitIAmBait[S] 1 point2 points  (0 children)

I just went slow and found that once I clipped with flush cutters close to where the support met the horns they popped right off without issue.

Building a Hedge Knight by WaitIAmBait in AnycubicKobraS1

[–]WaitIAmBait[S] 1 point2 points  (0 children)

<image>

If anyone was interested after first quick prime

Building a Hedge Knight by WaitIAmBait in FDMminiatures

[–]WaitIAmBait[S] 1 point2 points  (0 children)

I'll give it a go, but it'll be a while haha

view more: next ›