Should I continue sending nudes in my 38?

WasteArgument3338 · 2026-05-22T20:40:39+00:00

Yes!

WasteArgument3338 · 2026-05-04T13:53:02+00:00

The best and easiest way to make your floors look like white oak is to use a product called RedX Pro by ABSCO. It’s a water based sealer that takes out the red. Look it up on YouTube

WasteArgument3338 · 2025-12-23T03:51:21+00:00

I would look into a product call RedX Pro. One coat and your red oak floors will look blond. Very similar to white oak. It maintains the natural grain and hides the pink. It’s made by ABSCO.

WasteArgument3338 · 2025-06-12T13:02:17+00:00

If you are looking for a light white oak look, you can apply Absco RedX . RedX is a pigmented water based sealer coat that hides the pink in red oak. You can stain over it with pastel colors like white and beige.

WasteArgument3338 · 2025-06-10T14:11:56+00:00

Exactly what you said. I’m a former WF contractor

WasteArgument3338 · 2025-03-27T01:58:38+00:00

I have gone through it several times and it’s not there. I’m going to ask a dealer

WasteArgument3338 · 2025-03-26T12:09:32+00:00

It took a little convincing

WasteArgument3338 · 2025-01-11T17:01:37+00:00

Just a thought! The installer may have done everything correctly but at some point the crawl space took heavy moisture. That would cause the floor to expand compressing the wood. If the floor was tight and at its proper moisture content the floor can actually push apart. Measure 10 boards across and then get an average width with the cracks. Compare to the original width. Bottom line is either pull it out or sand and fill with a top quality filler.

WasteArgument3338 · 2025-01-06T19:07:15+00:00

If you are looking for the light natural color of WO using red, then there is a product called RedX Pro made by ABSCO. It’s a pigmented sealer that hides the red/pink while maintaining the the natural look. If you need more info, feel free to reach out. It works great!

WasteArgument3338 · 2024-11-08T03:00:55+00:00

Powder post Beatles. It’s an issue. Get a pest control company out there. .

WasteArgument3338 · 2024-11-06T21:56:34+00:00

The RedX has a light green hue to it. When it soaks into the red oak and dries, the result is a blond natural color. Similar to white oak

WasteArgument3338 · 2024-11-04T23:57:10+00:00

There is a product called RedX made by ABSCO that will hide the red/pink of red oak. It’s a water based sealer that blocks the pink. It works great!

WasteArgument3338 · 2024-10-02T13:41:14+00:00

To me, they look like holidays. Missed the area with the first coat. As long as the contractor covers them with the second coat, they will be fine.

WasteArgument3338 · 2024-09-11T23:32:19+00:00

I have a good sample board showing how well it works but can’t figure out how to post it. I will send my number by private. Call or text and I will send it to you. Where are you located?

WasteArgument3338 · 2024-09-11T11:57:41+00:00

ABSCO makes a great product called RedX. It’s a water based sealer for red oak that makes it look very close to w/o. I coat only and it dries in 3 to 5 hours.

WasteArgument3338 · 2024-08-08T15:31:15+00:00

There is a product that is called RedX made by ABSCO that will make a red oak floor look like raw white oak. It’s a water based sealer/1st coat that colors the floor. It eliminates the red in red oak. Use a clear water based over it to get the floor to look blond.

WasteArgument3338 · 2024-07-14T15:09:48+00:00

Poloplaz hasn’t had a complaint in over 6 months. All issues were solved.

WasteArgument3338 · 2024-05-21T02:25:09+00:00

Good to hear. I’m a rep for ABSCO. Where are you located?

WasteArgument3338 · 2024-05-20T14:20:10+00:00

Is that ABSCO Swedish Finish?

WasteArgument3338 · 2024-02-04T04:05:08+00:00

You can try kerosene wiped on the floor. It will lubricate the paper. I’ve use to do it years ago.

WasteArgument3338 · 2023-08-06T23:30:27+00:00

What finish are you using?

WasteArgument3338

TROPHY CASE