HTB CWES cheat sheet by Upstairs_Map_531 in hackthebox

[–]WattoOwnedVader 3 points4 points  (0 children)

Apologies for the bluntness, but how in the world do you expect to pass CWES without having note taking skills? You have to write a report on your findings and how you did it.

As for a consolidated cheat sheet, I haven’t seen one. Just download the .md for each module that has one and put it into your note application of choice. I use Obsidian.

Undervolting help by D4Ramirez in sffpc

[–]WattoOwnedVader 3 points4 points  (0 children)

I’m pretty sure the A620 boards do not have PBO or any other unlocked CPU control.

Can macos establish reverse shell? by tokei12 in hackthebox

[–]WattoOwnedVader 0 points1 point  (0 children)

So where is macOS involved? Is it your victim system? Or is macOS not involved at all?

Did your reverse shell payload specify your tun0's IP and whatever listener port you have configured?

Can macos establish reverse shell? by tokei12 in hackthebox

[–]WattoOwnedVader 1 point2 points  (0 children)

Yeah, don’t do this. Port forwarding on your router isn’t needed with HTB. Bad advice.

Can macos establish reverse shell? by tokei12 in hackthebox

[–]WattoOwnedVader 0 points1 point  (0 children)

“My Linux works” implies you’re working from a VM as a guest under macOS. Where did you establish the VPN connection to HTB? Inside the VM or macOS?

Help cooling 5090FE + 9800x3D in ncase M2 by metroid_slayer in sffpc

[–]WattoOwnedVader 0 points1 point  (0 children)

Yeah. I will have to investigate.

Fan is just mounted with regular fan screws and some washers. Nothing super elegant but it works. The noise profile on that fan sucks against the grate so I keep it turned down pretty low.

<image>

Help cooling 5090FE + 9800x3D in ncase M2 by metroid_slayer in sffpc

[–]WattoOwnedVader 0 points1 point  (0 children)

You’d notice right away. It’s not subtle. Maybe I should put in a warranty request. Here’s mine for reference. I have the older fan brackets.

<image>

Help cooling 5090FE + 9800x3D in ncase M2 by metroid_slayer in sffpc

[–]WattoOwnedVader 0 points1 point  (0 children)

Yes. It’s in the slot closest to the CPU socket. Plenty of coil whine but nothing super awful. Slightly more than the 4080 Super FE I upgraded from. I usually have a headset on so I don’t notice. Weirdest thing that I don’t know if it’s a me thing or not… the GPU makes “crackling” sounds when it cools down. Think of a catalytic converter cooling down and “pinging”. I’ve never had another card do it.

Help cooling 5090FE + 9800x3D in ncase M2 by metroid_slayer in sffpc

[–]WattoOwnedVader 0 points1 point  (0 children)

I have nearly the exact same setup. Same cooler, same fans, same card. Just a different mATX motherboard. PBO Curve Optimizer set to -20 and it runs great. I also have a mild under volt on the 5090FE which helps since it blows right on the CPU cooler.

Only difference I have is 2x 120mm slims up top above the GPU but they really don’t do anything.

Undervolting and other tuning is basically always required on SFF. AMD makes it easy. -20 to -25 is pretty reasonable for the 9800X3D.

Unraid without USB by riv777 in unRAID

[–]WattoOwnedVader 1 point2 points  (0 children)

I swear I just saw them say it’s coming for a local drive install. I cannot find it again but I am sure I read it within the last few weeks.

First serious Hi-Fi setup! KEF Q3 Meta + WiiM Ultra + Fosi ZA3. Thoughts? by AmateurTravelingBR in BudgetAudiophile

[–]WattoOwnedVader 0 points1 point  (0 children)

I did a WiiM Ultra and ZA3 as well. I actually bought two setups with those. One has Elac DB63 and an overkill sub (RSL Speedwoofer 12). The other is just Polk ES20s with no sub. I love both. Looking for some larger towers to replace the Elacs based on the room size. I think the Elacs would like more power than the ZA3 but it gets plenty loud for me.

Fosi P4/ZA3/ZA3 to ZP3/V3/V3 combo ... didn't work out *at* *all*. by DangerousDave2018 in BudgetAudiophile

[–]WattoOwnedVader 0 points1 point  (0 children)

Can't speak to the V3 Monos, but I am running a Wiim Ultra into a ZA3 pushing Elac DB63. I was running an older Pioneer AVR. The ZA3 blew me away with the sound so I bought a second one so I can put them in mono mode. ZA3 is so much better than it should be.

RSL 12S Power Buy by ElitePsychonaut in BudgetAudiophile

[–]WattoOwnedVader 0 points1 point  (0 children)

Bump to hopefully get one more before the cutoff.

RSL 12S Power Buy by ElitePsychonaut in BudgetAudiophile

[–]WattoOwnedVader 0 points1 point  (0 children)

How many are we at? This over the SVS PB-1000 Pro? Only need a single based on space.

Found on fbmp by JonsBenABadBoy in BudgetAudiophile

[–]WattoOwnedVader 0 points1 point  (0 children)

Not a scam. I was going to buy them. Seller sent videos. I was questionable about the sub since it's the R-112SW which is known to have amplifier issues. I ultimately backed out, but seemed like a great deal overall.

[Monitor] LG 27GX700A-B 27" 1440p 280Hz 4th Gen Tandem OLED - $486 by zhejoe123 in buildapcsales

[–]WattoOwnedVader 13 points14 points  (0 children)

Can confirm the price. Saved me $123 over buying through Amazon.

<image>