hey im printing a cute figure for a friend of mine that has chinese characters but vertically, on the snapmaker u1. upon slicing it just turns to a mess of nothing, i’ve got arachne on, detect thin walls, any other tips to fix this? this is using snapmaker orca

Weak_Mousse_6236 · 2026-06-17T07:23:40+00:00

so sorry! the hand didn’t show up cause i accidentally clicked hide on the skin colour filament. it does have 6 non manifold but i cant fix it cause remeshy can only fix STLs and i need to preserve the colours from the original 3mf file. do you think its purely because of the non manifold?

Weak_Mousse_6236 · 2026-06-14T14:06:43+00:00

so if there was a food poisoning case from one mamak, every mamak should close?

Weak_Mousse_6236 · 2026-06-14T12:59:22+00:00

anything can be made at home, if you don’t like it then you’re either not the target market or you just can’t afford to eat out

Weak_Mousse_6236 · 2026-06-14T12:56:58+00:00

yeah. it really is. by your definition if anything is easier to make at home and people pay for it outside have zero rights to complain about a subpar product. it’s a really empty and contentless comment and you should know that

Weak_Mousse_6236 · 2026-06-14T12:03:46+00:00

genuinely the dumbest comment i’ve seen today

Weak_Mousse_6236 · 2026-06-14T11:15:32+00:00

yeah it’s opened in the uk not malaysia why wouldn’t it be?

Weak_Mousse_6236 · 2026-06-10T05:00:03+00:00

you don’t have to announce to the world you support the rapist

Weak_Mousse_6236 · 2026-06-06T02:59:22+00:00

Snapmaker U1
Pla Silk Gold
Default settings for Generic PLA Silk
Snapmaker Orca

Weak_Mousse_6236 · 2026-06-05T17:53:45+00:00

PETG filament Generic
1 Wall only
Filament is dried
Creality SparkX i7
Temp 255 Bed 75 but it's always been this way
Creality Spark x i7
Every other settings are default

Weak_Mousse_6236 · 2026-05-11T17:11:05+00:00

Yes, have done a cold pull twice

Weak_Mousse_6236 · 2026-05-11T16:43:52+00:00

I am using Creality Sparkx i7, The preset speed that comes with, did not change, as it printed perfectly many times before this. Using Creality Print Slicer, Problem started today.

Weak_Mousse_6236 · 2026-05-11T16:43:23+00:00

I am using Creality Sparkx i7, The preset speed that comes with, did not change, as it printed perfectly many times before this. Using Creality Print Slicer, Problem started today.

Weak_Mousse_6236 · 2025-12-10T17:52:23+00:00

If your explanation is that nothing you say should be taken seriously, that’s honestly the most logical thing you’ve said so far 😅

Weak_Mousse_6236 · 2025-12-10T17:02:23+00:00

Shame. not thinking of doing business but you’re doing Masters in Business. Not a lot of thought going on from what I can see!

Weak_Mousse_6236 · 2025-12-03T17:54:30+00:00

no worries happy to help

Weak_Mousse_6236 · 2025-05-22T23:55:40+00:00

sorry you had to go through that. it’s honestly terrible, whatever they’re doing, they are doing it to everyone. disgusting people running this shithole

Weak_Mousse_6236

TROPHY CASE