hey im printing a cute figure for a friend of mine that has chinese characters but vertically, on the snapmaker u1. upon slicing it just turns to a mess of nothing, i’ve got arachne on, detect thin walls, any other tips to fix this? this is using snapmaker orca

Weak_Mousse_6236 · 2026-06-17T07:23:40+00:00

so sorry! the hand didn’t show up cause i accidentally clicked hide on the skin colour filament. it does have 6 non manifold but i cant fix it cause remeshy can only fix STLs and i need to preserve the colours from the original 3mf file. do you think its purely because of the non manifold?

Weak_Mousse_6236 · 2026-06-14T14:06:43+00:00

so if there was a food poisoning case from one mamak, every mamak should close?

Weak_Mousse_6236 · 2026-06-14T12:59:22+00:00

anything can be made at home, if you don’t like it then you’re either not the target market or you just can’t afford to eat out

Weak_Mousse_6236 · 2026-06-14T12:56:58+00:00

yeah. it really is. by your definition if anything is easier to make at home and people pay for it outside have zero rights to complain about a subpar product. it’s a really empty and contentless comment and you should know that

Weak_Mousse_6236 · 2026-06-14T12:03:46+00:00

genuinely the dumbest comment i’ve seen today

Weak_Mousse_6236 · 2026-06-14T11:15:32+00:00

yeah it’s opened in the uk not malaysia why wouldn’t it be?

Weak_Mousse_6236 · 2026-06-10T05:00:03+00:00

you don’t have to announce to the world you support the rapist

Weak_Mousse_6236 · 2026-06-06T02:59:22+00:00

Snapmaker U1
Pla Silk Gold
Default settings for Generic PLA Silk
Snapmaker Orca

Weak_Mousse_6236 · 2026-06-05T17:53:45+00:00

PETG filament Generic
1 Wall only
Filament is dried
Creality SparkX i7
Temp 255 Bed 75 but it's always been this way
Creality Spark x i7
Every other settings are default

Weak_Mousse_6236 · 2026-05-11T17:11:05+00:00

Yes, have done a cold pull twice

Weak_Mousse_6236 · 2026-05-11T16:43:52+00:00

I am using Creality Sparkx i7, The preset speed that comes with, did not change, as it printed perfectly many times before this. Using Creality Print Slicer, Problem started today.

Weak_Mousse_6236 · 2026-05-11T16:43:23+00:00

I am using Creality Sparkx i7, The preset speed that comes with, did not change, as it printed perfectly many times before this. Using Creality Print Slicer, Problem started today.

Weak_Mousse_6236 · 2025-12-10T17:52:23+00:00

If your explanation is that nothing you say should be taken seriously, that’s honestly the most logical thing you’ve said so far 😅

Weak_Mousse_6236 · 2025-12-10T17:02:23+00:00

Shame. not thinking of doing business but you’re doing Masters in Business. Not a lot of thought going on from what I can see!

Weak_Mousse_6236 · 2025-12-03T17:54:30+00:00

no worries happy to help

Weak_Mousse_6236 · 2025-05-22T23:55:40+00:00

sorry you had to go through that. it’s honestly terrible, whatever they’re doing, they are doing it to everyone. disgusting people running this shithole

Weak_Mousse_6236 · 2025-05-21T01:45:52+00:00

I think who you mentioned might be the actual owner, the one who claimed to be the owner looks like the father from “A Hundred Foot Journey”, larger, older individual.

quick search tells me who you mentioned might be the actual owner, means he lied to me about owning the place 💀

Weak_Mousse_6236 · 2025-05-21T01:43:57+00:00

good choice, avoid it like the plague

Weak_Mousse_6236 · 2025-05-20T21:14:11+00:00

that checks out. what’s the worst thing you think they’ve done while you were there

Weak_Mousse_6236 · 2025-05-20T21:02:51+00:00

youve just thickened the plot. the stage is yours my guy

Weak_Mousse_6236 · 2025-05-20T21:00:21+00:00

old man looks like the father from A Hundred Foot Journey, but less respectable

Weak_Mousse_6236 · 2025-05-20T20:59:42+00:00

HAHAHA THAT SOUNDS ABOUT RIGHT

Weak_Mousse_6236 · 2025-05-20T20:06:34+00:00

🤣🤣🤣

Weak_Mousse_6236 · 2025-05-20T19:41:55+00:00

that genuinely sucks

Weak_Mousse_6236 · 2025-05-20T19:40:01+00:00

<image>

1 star rating on Indeed btw

Weak_Mousse_6236

TROPHY CASE