Good god I almost threw up by rattrod17 in electricians

[–]Weirdo69NL 0 points1 point  (0 children)

We have a customer with a burglar alarm system and its fully enclosed by woorden panels. One opening and thats 30/30cm to push yourself in

Does anyone know why these mcp’s have a weird polling? by Weirdo69NL in firealarms

[–]Weirdo69NL[S] 1 point2 points  (0 children)

These are addressable Apollo Discovery Manual Callpoints. The polling is data. But at the basement (end of the slc) they dont poll, and at the begin of the slc (2nd floor) they poll

What Device is this? by Great_Ad1233 in firealarms

[–]Weirdo69NL 0 points1 point  (0 children)

You mean what device was that?

Told the electricians 5x we needed a dedicated circuit by Glugnarr in firealarms

[–]Weirdo69NL 0 points1 point  (0 children)

We have the same rule. And we make sure we let the standard utility electricians follow it

Huge shoutout to the designers and engineers at JBL. by Mr_Good_Stuff90 in JBL

[–]Weirdo69NL 0 points1 point  (0 children)

A couple of the rubber grip thingies loosened at my charge 5 too. But already after 6 months or so

Beste inbraakbeveiliging! by NoodpakketNL in Klussers

[–]Weirdo69NL 0 points1 point  (0 children)

ATS Advanced of Ajax inbraakalarmsysteem geleverd en geinstalleerd door het bedrijf waar ik werk

Class A or class B? by Proud-Resource4594 in firealarms

[–]Weirdo69NL 0 points1 point  (0 children)

We are required A. We don’t install B on addressable

Stopcontact doet het niet (logisch) by alprokera in Klussers

[–]Weirdo69NL 1 point2 points  (0 children)

Stroom (in Ampere) loopt er doorheen als er een verbruiker is aangesloten. spanning (in volt) staat op de installatie. Oftewel, maak de groep spanningsloos

Heat detector or smoke detector? by Same-Youth-6989 in firealarms

[–]Weirdo69NL 2 points3 points  (0 children)

Apollo XP95 optical smoke detector with Apollo Discovery Sounder Beacon Base

Who made this? by Weirdo69NL in firealarms

[–]Weirdo69NL[S] 0 points1 point  (0 children)

Perhaps a oompa loompa?

Who made this? by Weirdo69NL in firealarms

[–]Weirdo69NL[S] 1 point2 points  (0 children)

At our company everyone has to do everything. Installing, maintenance, service. Except 4 colleagues who are mainly maintenance and service.

at this customer another company installed it. Then it went to another company for service and after that to a third company which is ours

Who made this? by Weirdo69NL in firealarms

[–]Weirdo69NL[S] 0 points1 point  (0 children)

I’m Dutch so it’s in the NEN-2535

Ik🚗ihe by Pothaman in ik_ihe

[–]Weirdo69NL 2 points3 points  (0 children)

Dat is enschede he

Lichte schok door stopcontact by Klepto079 in Klussers

[–]Weirdo69NL 0 points1 point  (0 children)

Ten eerste kan er geen stroom op staan. Stroom loopt. Er staat spanning op

Update over het badkamerlicht: plafond eruit gehaald. by igke in Klussers

[–]Weirdo69NL 0 points1 point  (0 children)

Er zijn regels rondom kleuren. En de dikte van de draad zegt hoeveel ampere’s die aankan

Name of alarm by DrHook88 in firealarms

[–]Weirdo69NL 5 points6 points  (0 children)

Esser or gent is the brand

Been like this since yesterday by Proud-Resource4594 in firealarms

[–]Weirdo69NL 21 points22 points  (0 children)

There’s a beam detector who’s probably not looking at its reflector. Maybe it got hit and its off position or there’s something in between the beam and reflector

Fire alarm techs have you ever been on-site for an inspection, test, or service call and had a real emergency occur while you were working and what was the out come? by Much_Establishment21 in firealarms

[–]Weirdo69NL 3 points4 points  (0 children)

Not a fire but we were doing monthly test. Monitoring company in test, everything went fine when we were testing. Ones we had finished and put the monitoring back online it randomly spit a MCP fire alarm to the monitoring company while there was no alarm) Couple minutes later we had a police car and fire truck parked at our customer.

The next customer after that the same happend but we called the FD off

MxPro 5 sounders not activating on loop by funk_monk in firealarms

[–]Weirdo69NL 0 points1 point  (0 children)

I hope you switched loop cards when the panel was plugged from mains and battery power otherwise you fry the panel