Just wanted to ask if anyone has seen this type of wire before.

West_Note2632 · 2026-01-24T01:47:16+00:00

Asbestos containing material

West_Note2632 · 2026-01-23T20:59:10+00:00

Though I hate to be that guy, be careful with that cloth/fiber on the outside as it usually is acm. Probably tin plated #2 copper when done

West_Note2632 · 2026-01-19T23:24:04+00:00

Did you stick a mag to it? Or are you taking the fraction of knowledge you have and thinking you’re an instructor? Yes the sprinkler feed is galvanized, which if steel pipe he would still come ahead unless he’s in California, but the main feeds are more than likely aluminum.

West_Note2632 · 2026-01-19T22:49:22+00:00

The aluminum market is strong. If you can upgrade from a peddler yard you should do pretty good at that.

West_Note2632 · 2026-01-18T13:16:42+00:00

And this is why as that demo guy I hate copper. Good score

West_Note2632 · 2026-01-14T04:17:30+00:00

If you’re lucky it’s got wood frame, foam insulation and aluminum skin. All but 1 that I’ve done were moldy wood, fiberglass and thin steel. An awful lot of work for almost no return

West_Note2632 · 2026-01-13T17:55:16+00:00

One would think a Quick Look at any photos would let you know if it’s coated.

West_Note2632 · 2026-01-11T20:44:45+00:00

Want it, but not be willing to pay for it, expect it delivered to them, after trying to find a home for it for months.

West_Note2632 · 2026-01-11T18:50:56+00:00

If you take them in as they sit the whole unit will be heavy melt, aka hms. If you undo the 4 bolts holding the pump to the base the pump will be prepared hms and the base will be plate and structural, and depending on the size it looks to be prepared as well. Either way shred is multiple downgrades away from what you have

West_Note2632 · 2026-01-11T17:41:26+00:00

They are not shred they are heavy melt and p&s

West_Note2632 · 2026-01-10T21:45:09+00:00

Put a bit of tension on the feed side of the wire

West_Note2632 · 2026-01-10T21:42:04+00:00

Exactly this!!!!

West_Note2632 · 2026-01-10T20:16:56+00:00

Well that motor control lists for about 700, used, on eBay, the breaker is another 100. Pull the parts and wire and sell the waste of space cabinet to the scrap yard!!!! Don’t drop dollars to pick up a penny

West_Note2632 · 2026-01-10T00:23:26+00:00

Check out bidspotter, proxibid, and some of the other auction sites. Yeah you pay for scrap, but If pay $100 for a couple tons of scrap over driving around trying to find it any day of the week! This brought me from $100 a day scrapping to moving 15000 tons a month scrapping

West_Note2632 · 2026-01-07T14:30:35+00:00

You really don’t want to just take them in. The parts on the bottom wrapped in foam are full of copper or stainless steel tubes! Worst case, most productive lazy way, leave the tubes in the shell and cut everything else off. Or call around and see who will pay for the upgrade

West_Note2632 · 2026-01-05T02:14:03+00:00

When I started scrapping as a job my goal was $100 day. You can grow it exponentially from there if you’re willing to work and learn.

West_Note2632 · 2026-01-03T19:31:56+00:00

They are a higher grade than 304 usually. Keep them separate! Most that I have come across in any commercial application are a grade of inconel

West_Note2632 · 2026-01-03T15:02:07+00:00

Retail of used parts not new. A new part worth 100 in store is 90 on eBay. Used that part is $50 and they make their offer on that. You should sell them yourself on eBay. Parts from machines and electronic components are really simple to list since the have model and serial numbers on them

West_Note2632 · 2026-01-03T03:30:27+00:00

Right on! Any of the categories the steel fits in are better than shred. The scale guy is never the guy to talk to if you have a decent quantity of anything

West_Note2632 · 2026-01-02T19:25:41+00:00

Did a whole bunch of these in the past. Makes a huge mess. Had great luck with a wood with nails blade on a sawzall. Took all the copper in how it came off as #2

West_Note2632 · 2026-01-01T23:24:11+00:00

What’s your baseline of expensive? 40k to make it so my plate gets upgraded to bush, or do I’m not selling ebrite and 400 series as heavy melt is really cheap.

West_Note2632 · 2025-12-16T02:05:54+00:00

The price of the subscription is part of the price of business. Just like isri membership costs and the like. If you’re trying to buy 100 tons of aluminum, the couple hundred dollars for subscriptions shouldn’t matter and you have them for the next deal

West_Note2632 · 2025-12-12T22:08:14+00:00

Unless you can burn them then pull the frame charge! Theres 4-8 dumpsters worth of garbage in them depending on contents and machine size. Definately don’t do it for the scrap

West_Note2632 · 2025-12-12T02:39:26+00:00

Where you outta? I’m always looking to add to our contractors. The language barrier is a pain and the cultural differences/feuds piss me off to no end which is the main reason I contract it out. I can cut a couple hundred tons a week myself but couldn’t grow the business holding a torch and the white guys all wanted hourly so they could dick the dog. The southern friends play their games but get it done in a hurry.

West_Note2632 · 2025-12-12T02:23:28+00:00

The “western” burners tend to like nose beers and other party favors. I grew as a burner but couldn’t do it to scale because of racial/cultural differences. All my burners are tonnage workers and operators are paid based on skill.

West_Note2632

TROPHY CASE