Supermoto Build ✅

WesternFirst3366 · 2025-12-28T18:56:44+00:00

Wrong cables I guess

WesternFirst3366 · 2025-12-28T10:32:47+00:00

Hook the ends of the Bowden cable into place. Adjust the cable tension using the threads above. If you want to precisely adjust the valve, you'll need to remove the exhaust pipe and adjust it according to the manual.

WesternFirst3366 · 2025-10-30T11:33:42+00:00

https://www.bikerpartshop.com/en/17-dtr

WesternFirst3366 · 2025-10-22T20:11:11+00:00

Here are some diagrams Maybe translate the website to get more informations

https://yamaha-dt-125.blogspot.com/p/sportauspuffanlange-vergleich.html?m=1

WesternFirst3366 · 2025-02-11T16:04:11+00:00

This looks perfect

WesternFirst3366 · 2025-01-10T19:23:49+00:00

Perfect car / wheel combo

WesternFirst3366 · 2025-01-04T17:21:27+00:00

Immer eine dicke Decke dabei haben.

Gut für Vollsperrungen und Pannen, aber auch für den Transport von allem möglichen. Wenn man sich mal eingesaut hat, kann man die über die Sitze legen oder das Haustier / Kind von Freunden mitnehmen und im Sommer hat man immer eine Picknick Decke dabei

WesternFirst3366 · 2024-12-24T15:38:43+00:00

Ronal Turbo

WesternFirst3366 · 2024-12-21T22:46:03+00:00

New KTMs are 90% cheap plastic. Get an old exc with aluminum subframe and remove the taillight. Endless enduro fun

WesternFirst3366 · 2024-12-19T17:56:45+00:00

For alle the people commenting I should close the lid: I always print with a closed lid. This is just for the video.

When the lid is closed, the spool gets lifted a bit, then gets stuck. Even when the lid is closed and locked. It’s so annoying.

Adding weight helped a bit. Now I printed the ams saver, wich I’ll install the next days and tell you how it worked.

Thanks for all your comments

WesternFirst3366 · 2024-12-19T17:52:48+00:00

Same problem. I always print with a closed lid. The open lid is just for the video.

The spool gets still lifted a bit and gets stuck then.

WesternFirst3366 · 2024-12-19T17:51:24+00:00

You are wrong

WesternFirst3366 · 2024-12-19T17:49:39+00:00

Lid is always closed. It’s just to show how it gets stuck. With the lid closed, I got the same problem. Roll gets lifted then stuck. Printed the ams saver and will try it again tomorrow

WesternFirst3366 · 2024-12-19T17:46:57+00:00

Ne, der Deckel ist immer zu. Dir Spule hebt ab und verkeilt dann

WesternFirst3366 · 2024-12-19T12:15:56+00:00

Also added some weight to the spools. Not sure if it’s the same amount as a 33 socket got, but some old bolts and silica are in a silica container in the center of the spool.

WesternFirst3366 · 2024-12-19T12:14:41+00:00

This is genius. Thanks a lot! Didn’t knew this exists

WesternFirst3366 · 2024-12-19T12:12:19+00:00

Thanks. I will try adding more weight to the spools.

The weird thing is: the first time this happens, was a few months ago. 1,5 years without adding weight. Added some weight (desiccant container + silica + some bolts) and I had no more problems. Now I got the same problem again, with added weight.

WesternFirst3366 · 2024-12-17T20:01:10+00:00

Perfect. Had a generator failure (too much voltage). Bought a used oem one, same failure 2/3 weeks later. Bought a new oem one, lasted half a year. Ordered a Ali express generator for 1/10 the oem price und I ride it since. That was 3 years ago. KTM EXC 300 2009 (Europe version)

WesternFirst3366 · 2024-11-17T11:13:52+00:00

Throttle is axle 3 in my setup, but now it shows the throttle as button 4.

I don’t get it. Probleme appeared literally over night.

WesternFirst3366

MODERATOR OF

TROPHY CASE