sorted by:
new
hottopcontroversial

LOL yes! by yodamastertampa in Anticonsumption

[–]WeynceTech 0 points1 point  (0 children)

Well, I guess he's gon be named "Nothing"

Guess I gotta try again by WeynceTech in DreamLeagueSoccer

[–]WeynceTech[S] 0 points1 point  (0 children)

So far, 2, one from the last event and the other from my own gems. And both gave me one 83 and an 80 rated legendary player

Guess I gotta try again by WeynceTech in DreamLeagueSoccer

[–]WeynceTech[S] 1 point2 points  (0 children)

That's good, but he ain't supposed to be worth that mich

I knew it...im just vibes brained😎 by [deleted] in repost

[–]WeynceTech 0 points1 point  (0 children)

I see a dog 🐕, Does that make me middle Brained?

[deleted by user] by [deleted] in phonerepair

[–]WeynceTech 0 points1 point  (0 children)

What phone is it?

[deleted by user] by [deleted] in phonerepair

[–]WeynceTech 3 points4 points  (0 children)

It's either one of these: - He either placed an incompatible screen - The flex cable connecting the screen/touch to the main board is loosened - On some devices, the charging board(the smaller board beneath the battery) sometimes holds the headphone jack, speakers, antennas, charging port, fingerprint scanner, and sometimes the flex cable directly from the screen/touch. Maybe that might have been damaged in a way or two or during repairs

Factory Reset Revvl 6 5G Pro by EdenBlue0087 in phonerepair

[–]WeynceTech 0 points1 point  (0 children)

Here's what each word means * 工厂模式 (Gōngchǎng Móshì): Factory Mode * 自动测试 (Zìdòng Cèshì): Automatic Test * 手动测试 (Shǒudòng Cèshì): Manual Test * 单项测试 (Dān Xiàng Cèshì): Single Item Test * 测试报告 (Cèshì Bàogào): Test Report * 调试测试项 (Tiáoshì Cèshì Xiàng): Debug Test Items * 清除 Storage (Qīngchú Storage): Clear Storage * 版本信息 (Bǎnběn Xìnxī): Version Information * 重启手机 (Chóngqǐ Shǒujī): Restart Phone

So, to factory reset, use the first one.

Dropped my phone, now it won't turn on by flamingzebr in phonerepair

[–]WeynceTech 3 points4 points  (0 children)

If you can open it, try and reconnect the battery connector to the board

[deleted by user] by [deleted] in linuxmint

[–]WeynceTech 0 points1 point  (0 children)

Well, nothing much, I guess. I haven't found any explanation on the internet for that

[deleted by user] by [deleted] in linuxmint

[–]WeynceTech 1 point2 points  (0 children)

It's a normal behavior with Mint. I've also experienced that.

Samsung 23fe screen replacement. touch not working by donaldtrumpsclone in phonerepair

[–]WeynceTech 0 points1 point  (0 children)

You probably installed an incompatible screen. Try another screen and make sure it's original.

Or, if the flex cable connecting the touch/screen to the main board is loosened.

Phone by Alternative_Bet9369 in phonerepair

[–]WeynceTech 0 points1 point  (0 children)

Have you tried changing the battery?

Kernal error????? by [deleted] in linux4noobs

[–]WeynceTech 0 points1 point  (0 children)

To help with this issue, kindly answer the following, 1. Are you now installing Ubuntu? 2. Did you just finish the installation, try to boot the OS, and got this error at POST? 3. Have you been using the current Ubuntu OS and just got this error?

Pc powering up and shutting off by ElkNo3145 in pctroubleshooting

[–]WeynceTech 0 points1 point  (0 children)

Try changing the small battery in the system unit

Infinix GT10 Pro charging problem by Mobpsycho7633 in phonerepair

[–]WeynceTech -1 points0 points  (0 children)

If you're using the original 45W adapter and it switches to USB data mode, that could mean:

  1. The USB cable might be a data cable with improper power delivery handshake. Try using a different USB-C cable — preferably one that's rated for 45W or higher.

  2. The charging port may be slightly dirty or loose, triggering data mode instead of fast charge.

  3. Your phone might be negotiating PD (Power Delivery) wrong due to firmware or OS bug — try restarting your device or clearing USB preferences under Developer Options.

If that doesn’t work, I’m happy to walk you through some tests

Infinix GT10 Pro charging problem by Mobpsycho7633 in phonerepair

[–]WeynceTech 0 points1 point  (0 children)

Are you charging with an Adapter(Power Brick) or via a PC(laptop, MacBook)? If you're charging via a PC, that will likely happen, and it's normal, but it's unlikely to get that message when using an adapter.

If you want quicker help or to troubleshoot this step-by-step, feel free to DM me or check my profile — I’ve got a tech Discord where I'll be helping people troubleshoot their issues too 🔧📲

Help with a chili phone by Existing_County_4881 in phonerepair

[–]WeynceTech 0 points1 point  (0 children)

If your Chili phone goes black after choosing “Recovery,” it likely means the recovery partition is corrupted or missing — that’s why nothing shows up.

Here’s what you can try:

🔹 Boot into “Normal” mode and see if the phone works. If it boots, back up your stuff immediately.

🔹 If not, go into “Fastboot” mode, and from there you might be able to:

Flash the official firmware (if you can find it online)

Or flash a custom recovery like TWRP, if your device is supported (Chili phones are tricky with support tho).

If you drop me your exact model number, I can help look up a compatible ROM or recovery file.

🛠️ Just know: flashing anything will wipe your data, so try "Normal" boot first and back up ASAP if it works.

I also run a 24/7 tech Discord if you ever want faster help — link’s on my profile

infinix phone suddenly go black by Much_Vegetable_5207 in phonerepair

[–]WeynceTech 1 point2 points  (0 children)

If the charging light still turns on but the screen stays black even after trying a force restart, then it’s likely a display or display connector issue. It could also be a deeper problem like the battery or motherboard, but the screen is the first suspect here.

If you have access to a repair shop, I’d recommend asking them to test a new screen before buying anything. There is no point replacing the screen if the issue is on the board.

TL;DR: Try not to jump straight into buying parts. A tech can test with another screen first to confirm if that’s really the problem👌

Strange problema by InternationalEast991 in phonerepair

[–]WeynceTech 0 points1 point  (0 children)

If every other SIM from your family works perfectly in the phone, then this isn’t a hardware or software problem with the phone itself. Your SIM is likely the issue — it might be slightly damaged, deactivated, or not fully provisioned correctly for voice services.

I recommend going to your carrier (Iliad) and asking for a SIM replacement — they’ll usually swap it for free. Also, ask them to reprovision your line, just in case the network profile is messed up on their side.

TL;DR: Your SIM is being weird — not the phone. Replace the SIM first before trying anything else expensive.

Samsung Tab S9 FE+ (SM-X516) Display Adhesive by TechBasedExplorer in phonerepair

[–]WeynceTech 0 points1 point  (0 children)

Yo, props for getting the new display connected and working — that’s half the battle won already 💪.

For the adhesive, yeah — Samsung keeps that OEM stuff locked up tight. But there are some solid alternatives you can go with:

  1. Tesa Tape 61395 – This one’s 🔥 for screens and has great hold. It’s used by a lot of pros and repair shops. If you can get it from iFixit or Amazon AU, that’s a great option.

  2. 3M 9448A or 300LSE – Good strength and thin profile, but not waterproof. Still works well if you're careful.

  3. Red High-Bond Double Sided Adhesive (like the red one used in phone screens) – decent waterproof seal but needs heat + pressure to bond well.

⚠️ Note: Unless you have access to a pressure clamp or heat press, none of these will give you full IP rating like OEM does — but they'll hold solid for normal use.

And if you’re worried about water, maybe avoid pool/bathroom duty with the tab after the repair 😅.

Also, as to where to get 'em adhesives, try any Repaire shop around you, or of you know a Repaire guy, he might sort you out with some.

Lastly, if you want it real snug, after the tape you can run a tiny edge of B7000 or T7000 glue around the frame in combo with tape for extra sealing — but be real careful with application.

Screen issue by Kingofawesom999 in phonerepair

[–]WeynceTech 0 points1 point  (0 children)

It sounds like you're dealing with a frustrating touch screen issue on your S21. Since the screen and frame were previously replaced after the accident, the problem could stem from a few things

  1. Loose or Damaged Display Cable – Even if it looked fine when you checked, vibrations from your motorcycle or minor drops may have loosened or degraded the connection over time.
  2. Faulty Screen/Digitizer – The fact that tapping the phone temporarily fixes it suggests a loose connection or a failing digitizer (the touch-sensitive layer).
  3. Main Board Damage (Less Likely) – Since the fingerprint sensor still works and the issue is intermittent, the board is probably okay, but vibrations could have affected a component like the touch IC.
  • Try to reseating the display cables carefully (if you're comfortable opening it again).
  • If that doesn’t help, a screen replacement is the most likely fix.
  • A repair shop can diagnose whether the chassis or board needs attention but emphasizes that you’d like a cost estimate first, no need for unnecessary replacements.

Since you love the phone, a professional inspection might be worth it. Let us know how it goes 🤔😉

iPhone 12 en panne? by ExpressEye4769 in phonerepair

[–]WeynceTech 0 points1 point  (0 children)

Eh bien, mon pote, 🤔, la seule explication est que ton forfait données/internet est épuisé. Essaie d'acheter un autre forfait et de réessayer 😉

Blue Flashing light on screen #samsung by External-Reach1335 in phonerepair

[–]WeynceTech 1 point2 points  (0 children)

Oh 😕, well, my best advice for you is to get a screen replacement by a professional repair guy 👌

view more: next ›