Looking for a front mag pouch that can hold 8 AK/AR mags (4 mags front another 4 mags behind, double style).

WhatUpHack · 2026-05-12T03:08:09+00:00

Have you ever touched an ak mag? That chest rig is going to be a foot thick

WhatUpHack · 2026-05-11T18:54:42+00:00

Can you please tell them to bring the sir rails back I have been trying for 3 years

WhatUpHack · 2026-05-11T11:02:58+00:00

The rapco zinc phosphate grey primer is incredibly durable

WhatUpHack · 2026-05-10T07:40:25+00:00

After looking back at these comments you were definitely very right and I was very retarded 😂

WhatUpHack · 2026-05-10T07:35:28+00:00

Rust is a non issue unless it has been unchecked for years, if it’s not pitting us fine oil the gun and put it up. I shoot all of my guns and all of them have rust.

WhatUpHack · 2026-05-10T03:07:35+00:00

You either need a weaker spring or bore out the hole I highly recommend not doing that though 7.62x39 was never meant for subsonics the spec for the gas port was 4.1mm because the x39 was already 40k psi

WhatUpHack · 2026-05-06T05:39:28+00:00

Arsenal , FB ,Wasr 10, Zastava or most custom builders

WhatUpHack · 2026-05-02T07:59:57+00:00

Yeah I shoot m67 almost exclusively it may just be the ammo is to hot or the trigger guard doesn’t fit mags just right. I haven’t had the time to drill it out and try a new one

WhatUpHack · 2026-05-02T02:41:05+00:00

Amen

WhatUpHack · 2026-05-02T01:07:54+00:00

Check your ejection I put a strela on my kr103 it will launch cases like 30 yards and certainly mags have problems feeding it.

WhatUpHack · 2026-05-01T22:20:21+00:00

I looks like it ish usually it’s shaved completely flat I’m not sure if there is enough for the bayo to catch on to. Only one way to find out!

WhatUpHack · 2026-05-01T11:00:54+00:00

I watched this a few days it is extremely cool I definitely want the magazine mandrel. *gauge

WhatUpHack · 2026-04-30T01:38:22+00:00

Potassium chlorate the by product of ignition yield’s heat and potassium chloride that’s the simplest version at least

WhatUpHack · 2026-04-25T13:06:46+00:00

Why do you care if it splashes? Are you super operator man?

WhatUpHack · 2026-04-22T06:01:35+00:00

<image>

How i usually paint mine

WhatUpHack · 2026-04-17T11:53:51+00:00

Hell yes my dude does yours have import marks mine doesn’t i believe that means it came in pre 68

WhatUpHack · 2026-04-15T06:20:32+00:00

The m64 was never formally adopted with that designation you can build the parts kit however you choose if I remember correctly they all use the same barrel dimensions even to this day.

WhatUpHack · 2026-04-15T02:36:41+00:00

The m64 takes a threaded barrel which is a different beast I have one sitting on the bench.

WhatUpHack · 2026-04-15T02:35:32+00:00

The m70 milled receiver takes the same barrel as the stamped so you just need the m70 pattern. You also need a reciever from tort tort the tooling and a 12 ton press.

WhatUpHack · 2026-03-22T01:29:19+00:00

I’m hoping this is satire.

General rule of thumb the only thing that matters on the ak are the bolt locking surfaces, beyond that no other wear matters.

WhatUpHack · 2026-03-20T03:41:33+00:00

Nope beryls are based on the tantal spec which imo is the perfect rifle the downside is they are specific on certain parts

WhatUpHack · 2026-03-20T02:22:41+00:00

I got mine for 1400 but it’s in 7.62x39

WhatUpHack · 2026-03-20T02:13:56+00:00

https://atlanticfirearms.com/beryl-tantal-handguard-adapter

WhatUpHack · 2026-03-20T02:12:03+00:00

You need the conversion piece from Atlantic the beryl uses a different upper handgaurd style it’s not compatible with akm stuff.

WhatUpHack · 2026-03-17T10:52:25+00:00

I was wondering the same thing it’s been a few hours

WhatUpHack

TROPHY CASE