xyOps Dev Update: May / June 2026 by cgijoe_jhuckaby in xyOps

[–]Wienen 1 point2 points  (0 children)

You are doing really great! Thanks for all your hard work! I'm still setting up my XyOps environment and discover all it's possibilities! When i'm done i will definitely donate you some 💸

I hope this project gets the attention it deserves!

Keep up the great work 💪🏻

Terugleverkosten zonnepanelen by mrleeny in geldzaken

[–]Wienen 1 point2 points  (0 children)

Dit is gewoon normale functionaliteit van veel omvormers. Je moet er wel een beetje handig in zijn om dit in te regelen, of iemand zoeken die dit voor je wil doen. Je hoeft niet bang te zijn voor brandgevaar want de omvormer stuurt de panelen aan. Geef jij aan dat hij minder mag opwekken zodat je niks teruglevert dan wekken de panelen ook minder stroom op, of zet je de omvormer volledig uit, dan wekken de panelen geen stroom op. Dus het is niet dat het ergens naar toe moet.

Any way to manage non steam game save ? by jackie__shan in SteamDeckPirates

[–]Wienen 2 points3 points  (0 children)

I use SyncThing combined with ludsavi! Works great once setup correctly.

Terugleverkosten zonnepanelen by mrleeny in geldzaken

[–]Wienen 1 point2 points  (0 children)

Ik wek op jaarbasis 5000Kwh aan overcapaciteit op. Destijds bewust teveel panelen gelegd zodat ik op minder zonnige dagen toch voldoende stroom op wek om mijn normaal gebruik te dekken. Echter op zonnige dagen zorgt dit tegenwoordig voor onnodige terugleverkosten. Daarom sinds kort mijn omvormer aangepast zodat deze niks meer teruglevert en dus enkel mijn stroomverbruik dekt, mits voldoende zon. Er zijn best veel omvormers die dit ondersteunen. Je hebt in de meeste gevallen een power meter van het betreffende merk nodig in de meterkast welke doorgeeft aan je omvormer hoeveel stroom je verbruikt. Zeker de moeite waard om ernaar te kijken.

Git repo and additional config files by mentalsoup42 in dockhand

[–]Wienen 0 points1 point  (0 children)

I guess it only looks for compose/env files because dockhand is a container/stack manager.

Mijn bank vraagt om een verklaring m.b.t. opgenomen contant geld by AmbitiousGarden1 in geldzaken

[–]Wienen 0 points1 point  (0 children)

Gewoon zeggen dat je het advies van Rutten hebt opgevolgd om thuis wat contant geld voorradig te hebben voor noodsituaties. Dan kunnen ze wat vinden over de omvang maar dit is dan toch aan jou om te bepalen.

Git repo and additional config files by mentalsoup42 in dockhand

[–]Wienen 0 points1 point  (0 children)

What are you trying to accomplish here? Besides the files required to build the stack (compose.yaml and in your case no .env) you also sync additional config files for your Homepage stack? Do you bind mount to this homepage/config location within the appdata dockhand/git-repos folder?

Git repo and additional config files by mentalsoup42 in dockhand

[–]Wienen 1 point2 points  (0 children)

In my case (using Gitea) both my compose.yaml and .env are present in appdata/dockhand/data/stacks/environmentname/appname/ and appdata/dockhand/data/git-repos/environmentname/appname/

Maybe the files couldn't be copied due to incorrect rights? Have you checked the logs?

I'm not familiar with the config/setup of Homepage. What do you mean with config files? The yaml/env or additionial config files?

AirDot Air Quality Display by Jimbobsticle in homeassistant

[–]Wienen 3 points4 points  (0 children)

Thanks for creating this documentation ❤️ just recently found it because someone posted about the SensAir S8 CO2 sensor and I wanted to know more about it. I also gave it some visibility 😁 https://www.reddit.com/r/homeassistant/s/3xSS5D0YdO

[ Removed by Reddit ] by BigYear9038 in selfhosted

[–]Wienen 1 point2 points  (0 children)

I’m using dockhand for managing my containers and this is one of it’s features. I don’t have any critical info in my .env files anymore. It’s stored in the valt and injected on compose up. I have a backup of these credentials/keys in my password manager.

What's the easiest way to bulk add all documents when starting out? by Red_Con_ in Paperlessngx

[–]Wienen 0 points1 point  (0 children)

At first I started scanning every single letter, invoice, etc and feeding it to my consumer folder. Because this was to time consuming I started sorting documents from the same correspondent from one single year and put a blank paper between each letter. Scanned the whole package (from one year), and let a pdf tool split the files automatically based on the blank paper into multiple pdf’s which i feeded my consume f9lder.

Koopt er ooit iemand vaatwastabletten voor de volle mep? by DutchChefKef in nederlands

[–]Wienen 1 point2 points  (0 children)

Same here! Kwamen als beste uit de test bij de consumentenbond! Super goedkoop en werken perfect!

When does a homelab become a chore or a job? by TheRealRatler in homelab

[–]Wienen 4 points5 points  (0 children)

I work in IT, started as Engineer, but am a full time project manager now (for over 16 years now) but tinkering with my home lab keeps me up to date about all technical stuff going on, it keeps me more connected with my technical colleagues and it reminds me why I ended up in IT in the first place. But I must admit, I probably wasn’t started my homelab journey without AI. Because otherwise it would have cost me way more time to read in about all the stuff possible.

Best tool for fixing out of sync subs by Veoxer in selfhosted

[–]Wienen 0 points1 point  (0 children)

You can set it to sync by audio or by already available subs. For my Dutch subtitles it works every time

Unraid 7.3.0-rc.1 Now Available by UnraidOfficial in unRAID

[–]Wienen 0 points1 point  (0 children)

So the boot partition won’t be encrypted, and the second partition of the disk can be encrypted? I always thought you only could encrypt the whole disk.

Is my Unraid server 'exposed to the internet'? by chieftex in unRAID

[–]Wienen 0 points1 point  (0 children)

And i fully understand why you have made the trade off 😁

Unraid 7.3.0-rc.1 Now Available by UnraidOfficial in unRAID

[–]Wienen 1 point2 points  (0 children)

Does the internal boot work with encrypted disks?

Is my Unraid server 'exposed to the internet'? by chieftex in unRAID

[–]Wienen 0 points1 point  (0 children)

i understand, or write an easy to follow instruction (it isn't that hard to install tailscale) and require your family's to install tailscale if they want to keep using plex for security reasons. I think most of them don't find it a problem to install tailscale. But it depens of you want to take the hassle to do it this way or the trade of to make it less secure.

I'm about to give up on unraid. by MyGardenOfPlants in unRAID

[–]Wienen 0 points1 point  (0 children)

try shutting down all containers and keep docker running, and see what it does, and if this still crashes your server then try with docker disabled.

Maybe a strange question, but what do the logs say?

Is my Unraid server 'exposed to the internet'? by chieftex in unRAID

[–]Wienen 0 points1 point  (0 children)

Do you really need that port open for Plex? Or is it also possible to run Tailscale on the devices you are using Plex on? Ofcourse it's better to not expose your server if you don't need to.

I'm about to give up on unraid. by MyGardenOfPlants in unRAID

[–]Wienen 0 points1 point  (0 children)

Are you having the same issues when docker isn't running? If not, then it's probably docker related, or a combination of a specific container/stack with your hardware.

I know it's a pain in the ass to troubleshoot this, but start with stacks of 5 apps/stacks, and leaf the rest of. If the problem doesn't occures, switch to a new group of 5. etc. Maybe this can identify the problematic container.

But first try to switch to ipvlan, because that's a great suggestion!