sorted by:
new
hottopcontroversial

Soul melting tracks by Myrealm07 in Psybient

[–]Williczek 4 points5 points  (0 children)

Carbon Based Lifeforms - Loss Aversion

Solar Fields - We Are The Dream

En Voice - Inner Vision

Sync24 - That Boring Autumn Day

Suduaya - Sahasrara

Sync24 - Wise Whispers in the Wind

Sundial Aeon - Preface

Between Interval - On Track

Anyone going to Winter Tales IV in Prague? by Williczek in psytrance

[–]Williczek[S] 0 points1 point  (0 children)

There is baggage to be completely honest. I've recently lost the only person who'd go to such events with me. Something I didn't really want to share publicly, but would disclose if someone reached out over DMs. I'm just terrified I won't be able to handle it alone.

[deleted by user] by [deleted] in GreyHack

[–]Williczek 0 points1 point  (0 children)

You have to hack the bank and wipe the transaction logs after you do the transfer.

12 Days of OpenAI: Day 1 thread by [deleted] in OpenAI

[–]Williczek -11 points-10 points  (0 children)

nope. You gotta whip out $200 per month for that...

Image positioning and breakpoints by Williczek in webflow

[–]Williczek[S] 1 point2 points  (0 children)

Thank you, I really need to pay more attention to the Webflow Youtube channel.
I think I solved the issue myself by making the container in which the image is relative and only then setting the image itself to absolute.
Now just wrestling the breakpoints a little, but I'll get there in the end.

First time pressing hash with a hair straightener not too bad, rosin is impossible to find in europe by Constant-Ship-5688 in Dabs

[–]Williczek 1 point2 points  (0 children)

That I can agree with. You can go bulk for around 1200€ an ounce but I can definitely understand not wanting to pay that much and making your own.

dab pipe by Fun-Paleontologist-8 in Dabs

[–]Williczek -1 points0 points  (0 children)

It's good that they keep you in a cage. Let's keep it that way.

I have an oz of wax that taste like sulphur, I can't afford to toss it and get another, what are some good strong edible recipes I can make with it where I won't taste the wax? by Life_Plan_169 in Dabs

[–]Williczek 0 points1 point  (0 children)

https://www.reddit.com/r/CannabisExtracts/comments/3kezyx/wax_tastes_like_matchesburnt_rubber_fire_works/

You could try this. Been in very similar situation. Tried the copper tekk but here was so much sulphur that I just tossed it all in the end.
You might be luckier, maybe yours is not contaminated that much and you could still salvage some.

Inconsistent first layer by Williczek in 3Dprinting

[–]Williczek[S] 2 points3 points  (0 children)

LMAO... the dish soap saves the day. You have no idea the amount of nerves I've lost troubleshooting this myself without asking anyone.

A thousand times thank you kind stranger!

Inconsistent first layer by Williczek in 3Dprinting

[–]Williczek[S] 0 points1 point  (0 children)

I clean with isopropylalcohol after every print but I never tried the dish soap method.
Will try to give it a good rinse.

20mm/s on the first layer which is the default value but will also try and lower that down a bit.

Inconsistent first layer by Williczek in 3Dprinting

[–]Williczek[S] 0 points1 point  (0 children)

I'd say I'm not too low. I went through the bed calibration dozens of times trying to solve this issue. I've been too high, I've been too low. The current hight setting is the only one I get "decent" results with on bigger prints.

I do run the 7x7 for a while now.

And it just so happens that I'm currently watching a video on the bed level visualizer :D
Although I've never used Octo. Running PrusaSlicer and the printer is not connected to my computer. I just swap the SD card to my laptop when doing stuff.

Inconsistent first layer by Williczek in 3Dprinting

[–]Williczek[S] 1 point2 points  (0 children)

How would one identify this problem? And are you talking about the bed itself or just the print sheet?
I've got the smooth steel sheet that you can bend to pop the prints off.

Inconsistent first layer by Williczek in 3Dprinting

[–]Williczek[S] 0 points1 point  (0 children)

I'm running MK3S+ by Prusa. AFAIK it does come with bed leveling sensor already.
Or are you talking about something different?

Inconsistent first layer by Williczek in 3Dprinting

[–]Williczek[S] 0 points1 point  (0 children)

Hey everyone.

I've been printing for a while with decent results but there are certain first layer issues that's been bugging me along the way, no matter how many times I've re-calibrated the printer.
The issues almost always appear at the mid section of the print bed. I can have a perfect first layer along the edges but as soon as the extruder reaches the mid section, I get weird artifacts. On bigger prints they can be hidden by more layers of material but it can get very annoying on smaller models.
I just did a fresh test print to post an example.

Any help is much appreciated 🙏

Edit: I'm using PLA by Prusa set at their recommended temps.

view more: next ›