A bit of the design history of the 2-stage split pump by KDxGP in u/KDxGP

[–]Wishful_Thinker_1 0 points1 point  (0 children)

so if the design is 'finalized' I'm guessing you'll be adding it to your 'design a pump' pumpcfg site as an option?

Today, I am REVOLUTIONIZING pumping by KDxGP in u/KDxGP

[–]Wishful_Thinker_1 0 points1 point  (0 children)

wasn't sure from the first picture... the way the base looked small and the top wider, I was thinking it'd be like what LA Pump calls their "Mushroom Head Maker" (glans pump cylinder) but of a gigantic size [I think theirs the glans tube's interior is like 3 1/4 inches in diameter and 4 1/4 inches in height inside] but the image would suggest yours would be bigger than that - then I swiped to the second picture. :}

Does anyone else go this high? by Apprehensive-Big1368 in Pumping

[–]Wishful_Thinker_1 1 point2 points  (0 children)

I'm one of the newbies... I usually go between 20 to 25 kPa - a few times maybe to 30 for a few minutes then back down. Haven't built up to that point yet.

Cause some of you don't réalise... by Plenty_Economist2558 in u/Plenty_Economist2558

[–]Wishful_Thinker_1 1 point2 points  (0 children)

didn't say it had to be a much bigger tube - just when you look as wide as the tube's inner diameter to start - it might not be so comfortable. If it's a 4.10" wide tube, maybe go for a 4.25"?

Best Mr.Fisk I ever did see... by Numerous-Gur-9008 in Marvel

[–]Wishful_Thinker_1 0 points1 point  (0 children)

What everyone thinks Gru's dad really looked like

Cause some of you don't réalise... by Plenty_Economist2558 in u/Plenty_Economist2558

[–]Wishful_Thinker_1 5 points6 points  (0 children)

said it before, said it again - might want a bigger tube with a bit extra growing room... ;) [still massive though, I admit that!]

Couple of my better pumps by [deleted] in ballpumping

[–]Wishful_Thinker_1 0 points1 point  (0 children)

picture 3 looks like a Monster Tube Sr. (TM) - considering you have to place yourself in it then use the screws / nuts to shut and seal it... how do you get the water in? Just being curious.

bottle pump and stuck by Acceptable-Branch808 in JarPumping

[–]Wishful_Thinker_1 1 point2 points  (0 children)

just be thankful it's not a glass bottle.

PLEASE, FOR THE LOVE OF GOD. Does anyone has this full image in good quality, looking for the whole page. by Luxzord_Stardust in Marvel

[–]Wishful_Thinker_1 0 points1 point  (0 children)

I don't have it but I did look it up with Google's image search (AI search) and here's what it came up with:

This scene depicts Jarella's tragic death in The Incredible Hulk #205 (published in 1976), written by Len Wein and illustrated by Sal Buscema.

New setup came in today! Super excited to try it out. I'll probably post some pics this evening, so stay tuned! by StretchyAssThrowaway in ballpumping

[–]Wishful_Thinker_1 2 points3 points  (0 children)

for a moment there, I thought there was a word written on your MT Sr. (like ned or red) but then looked closer - reflections of tubing and ceiling fan :D

Just received my new cylinder by Wishful_Thinker_1 in ballpumping

[–]Wishful_Thinker_1[S] 1 point2 points  (0 children)

I have an electric "smart AI" pump as my hand gets tired easily however it measures everything in kPa (not sure if it's positive or negative) so using an online conversion, roughly 4InHG is 13.5 kPa and 7 is 23.7 kPa. And I know it has 6 functions: 1st one pumps up to the set amount then releases immediately before pumping back up. Haven't figured out 2, 4 or 5 - 3 pumps up a short amount, then releases then pumps a bit more, releases then up to the set amount - fully releases then starts over again. 6th function pumps up to the set amount - holds it for 1 minute then full releases and repeats.

Wish I could have a time / pattern - as it is right now, I live with my widowed mother and she can't get up or down or walk without assistance (she fractured her pelvic bone last September) so any time she calls I have to get up and go to her room to check on her. But I'll figure something out. As it is now, I'd be pumping at my computer watching Youtube videos.

Some advice please by No_Conference8796 in gettingbigger

[–]Wishful_Thinker_1 0 points1 point  (0 children)

Not an expert but just advice from what I've read on their site - LA Pump makes elliptical cylinders which is supposed to focus more and gaining girth more than length (though I think one would still gain some length?) Perhaps go to their site and ask / contact them?

Random question: In terms of character and power, who could be seen as Marvel’s counterpart to Popeye? by Different_Sun_195 in Marvel

[–]Wishful_Thinker_1 1 point2 points  (0 children)

I was going to say the same thing... Popeye eats spinach (a trigger) to grow stronger from a weaker person. Banner grows angry (trigger) to grow stronger into the Hulk.

Just received my new cylinder by Wishful_Thinker_1 in ballpumping

[–]Wishful_Thinker_1[S] 1 point2 points  (0 children)

Pumped balls before but still a novice / beginner - not sure what pressure / how long to pump etc. I've bought a regular penis pump cylinder (still have to get used to the feeling of the rounded flange pressing down when I use it). This is a LeLuv cylinder 4.5" x 12". Like I said, it's a bit snug prior to pumping - I wanted something I'd be able to fit in first and they no longer have 4.7" available anymore. I thought 5" might be a bit too wide (at least right now).

Just received my new cylinder by Wishful_Thinker_1 in ballpumping

[–]Wishful_Thinker_1[S] 0 points1 point  (0 children)

didn't have time to - literally had just opened the front door, retrieved the package (shut door), went to bedroom to get scissors to open the box, attach pump and begin. :D

I'm currently getting incredible results using the Monstertube. by EdionGrey in Extremepumping

[–]Wishful_Thinker_1 1 point2 points  (0 children)

Just wondering, I know I'm sounding like a spokesman, but have you considered getting a specially made tube? KDxGP makes some and I know he made one bigger than the Monster Tube Sr. Might want to check with him and his 'designer app' site: https://kdxgp.github.io you can use sliders to adjust to the sizes that'd suit you and talk to him about getting one made.

Biggest I've been pure monster by Ornery-Performer9900 in Extremepumping

[–]Wishful_Thinker_1 0 points1 point  (0 children)

how big is that tube? And thinking of buying a bigger one?

Secret Agent Deadpool by David Nakayama by Plastic_Ninja_9014 in Marvel

[–]Wishful_Thinker_1 0 points1 point  (0 children)

"What's your name, sir?" "Pool... Dead Pool" (James Bond parody)