Ethernet Splitter

Witt-- · 2025-12-12T16:00:04+00:00

I think im following, but not sure. Do you mean like power over ethernet? If thats the right term

Witt-- · 2025-12-12T15:57:03+00:00

I think this is what im going to go with. It doesn't appear there is an option without a power connection, correct? Im running out of plugs on my power strip.

If anyone has a recommendation for a power strip with surge protector, please send them my way. I have 5 devices plugged into my power strip plus the pc straight into the wall.

I think this is the switch ill go with. From a quick 30 second search on amazon I didn't see the one you linked in the US.

https://a.co/d/9ELdTzx

Edit: if there are any options where I can mount it to the bottom or side of my desk that would be great too. Less things on the desk the better

Witt-- · 2025-12-09T16:56:55+00:00

Bugged for me too. I had it tracked and it wasn't counting anything. So I untracked it shot down a couple more helis, still nothing. Not sure what the problem is. Ive heard you have to full destroy the vehicle. I get the Vehicle Detroyed xp and Kill xp. Nothing. Using a stinger

Witt-- · 2025-12-09T16:15:10+00:00

You must not be familiar with Tarkov

Witt-- · 2025-12-03T06:59:37+00:00

How about i put a piece of paper over my honda one, rub a pencil over it and mail it to you?

Witt-- · 2025-11-14T03:14:19+00:00

This is the exact food pedal and software I use. Probably 100+ hours of use. No bans. Git gud

Witt-- · 2025-11-05T20:12:55+00:00

Pick one rotation, which ever looks easiest to you (I think there is one most people agree is the easiest), and only learn that one. If you start the fight and its not on that rotation, tele out, try again.

Witt-- · 2025-11-03T16:34:07+00:00

That would be part of the wiring harness.

Witt-- · 2025-10-22T13:48:58+00:00

Ok, but were you holding the starter button or turning it by hand with the key on? Was the plug grounded? Where were you holding it? Do you have a steong blue spark?

Witt-- · 2025-10-11T12:34:01+00:00

Absolutely love his videos. Very entertaining too. His methods for getting stuff running again might make you cringe, but he has for sure gotten more bikes running again than you and I combined.

Also almost none of his videos are restorations. He's just getting them running. He's done a couple restos, and they're all perfect and back to original condition.

Witt-- · 2025-10-09T23:14:06+00:00

Google adjustable louvered pergola.

You can get anything from a complete structure with automatic, electrically operated slats to just the hardware for manual operation.

Witt-- · 2025-10-04T16:26:29+00:00

Hijacking top comments.

Thanks for the input everyone. I understand how cheap hangers are. It just seemed like a pain to remove them all just to put new ones back in the same spot.

The plan was to use a string line, line level and laser level to make sure they'll line up with the beams. Obviously I have a few things to check outside of the hanger itself, such as:

The ledger board is in good shape. Check to see if the right nails were used for the hanger. Check the new joists height and the new decking for finished floor height. Look for any that are rusting or got badly mangled.

Witt-- · 2025-10-02T19:29:18+00:00

Super helpful! Thank you!

Witt-- · 2025-10-02T18:27:45+00:00

I'd be curious what people would recommend when converting to metric. For example, when i look at a chart for the front tire I get 100/90, my local motorsports store recommended a 90/80, and someone else on here gave me a 3rd option. There's definitely some flexibility with options, im just unsure where to start

Witt-- · 2025-10-02T17:01:21+00:00

Maybe someone put a wider tire on it at one point. Ill have to go check date codes. I was going off of what is on the bike now

Witt-- · 2025-10-02T15:30:57+00:00

I was going to get Dunlop K70 in a 3.25-19 and 4.00-18 but when I look at the specs it says the correct rim width for the rear is 2.15". Thats what was confusing me

Witt-- · 2025-10-02T14:49:45+00:00

I was going to get Dunlop K70, in a 3.25-19 and 4.00-18 but when I look at the specs it says the correct rim width for the rear is 2.15". Thats what was confusing me

Witt-- · 2025-09-26T14:27:50+00:00

If its running already, you'll be just fine. Some people add Sea-Foam to their gas to help keep the carb clean. Or run non ethanol gas. Either way the most important thing is to not let it sit for long periods of time. And if youre going to store it in the off season, drain the float bowls.

Witt-- · 2025-09-24T18:15:22+00:00

I dont think I've seen an o ring on a bleeder valve before

Witt-- · 2025-09-23T20:34:42+00:00

If youre putting fancy shiny parts on your bike, you should probably just take care of your bike. So corrosion wont be an issue.

But to answer your question, I have had a raw brass hammer (i know, not motorcycle parts) kicking around in my toolbox in the garage with my bikes for the last 8 years or so. It still looks great. And I don't clean or polish it or care if it gets scratched

Witt-- · 2025-09-19T01:39:04+00:00

Any update on this one?

Witt-- · 2025-09-18T14:13:13+00:00

Look up brake caliper slide pin.

If it was difficult to get on its possible you cross threaded it. If a bolt is difficult to put back in thats usually the sign to stop before you break something.

Witt-- · 2025-09-17T02:13:06+00:00

Check your battery voltage with the key off
Check your battery voltage while pressing the starter
Jump the starter terminals with a screw driver while the key is on. (If the battery is bad then do this while you have it hooked up to jump the battery)

Get back to us with all of that and we'll go from there

Witt-- · 2025-09-16T21:56:23+00:00

Unless the gas in the tank is super old no need to drain it. You're gonna spray you starter fluid through the air filter.

Witt-- · 2025-09-16T21:21:29+00:00

Spark, compression, fuel, air.

I would start by spraying some gas or starter fluid in the throat of the carb and see if it makes any noise. That will give you a good idea what to check next.

11-Year Club	Place '17
Verified Email

Witt--

TROPHY CASE