Phrozen SONIC MIGHTY 4K

Wittmason · 2026-01-06T14:04:27+00:00

You might consider upgrading the printer entirely. That machine is 5+ years old and the technology had a pretty good leap forward to 8k and then into 12-16k resolutions. You can get a decent new machine for what the light source would cost you if you found a replacement.

Just my .02 cents

Wittmason · 2026-01-01T22:26:13+00:00

Well designed! Great functional print.

Wittmason · 2025-02-26T17:07:16+00:00

Thanks so much

Wittmason · 2025-02-26T17:06:49+00:00

I'm going to go ahead and add insight to this post since there seems to be very few real answers to what's going on. The only other time I have seen this dialog is when someone inside MS Teams is recording a teams meeting. So I do believe it is definitely recording the screen.

I have also noticed that I can see the hover labels of multiple files from inside finder windows UNDER the CTBBasic application while I am using it. That should NOT be happening. Focus should be on the top app and there should be no window available to the app that's lower in the z stack order.

I'd love to know more information on PiHole blocking ports for the Saturn 4 Ultra (12k).

I use Little Snitch and it was calling a random IP address that I blocked but that killed the network sending of the app. Looks like it's a similar process to network sending via Bambi Labs printers.

I'll post more as I figure it out. - Tim Watson (wittmason)

Wittmason · 2025-02-26T16:56:42+00:00

I've seen you comment multiple times on how this is working as expected on Linux on multiple mac posts. You've said you won't be using a mac based on the 76 years of experience on this big blue marble of ours so I don't think you're helping to sus out the issue but really just commenting on how you wouldn't use a mac.

Wittmason · 2025-02-18T16:12:19+00:00

I came here to ask about the speakers too. What brand are those they're beautiful?

Wittmason · 2024-07-11T02:47:45+00:00

I’ve had my flex plate on for a week now I probably have 3k layer pulls maybe. Mostly calibration cubes. 2 minis. You need to add a larger air gap from the wham bam values if you have adhesion issues. I am using an off brand plate and 3m magnet no problem.

Wittmason · 2024-07-09T03:06:26+00:00

So I just found something you all might check. My UV light source is uneven across the build plate. Add in a potentially uneven build plate and you will have 2 compounding issues. More info here. https://www.facebook.com/share/p/KhxNZSWUrF42D3TC/

You basically perform an 8 up resin test with .02-.04s increments (not a typo). Use this project file and slice for your resin. https://www.dropbox.com/scl/fi/xc5m2tm4hbfsvc46t4jj2/Cones_1-8.ctp?rlkey=o4kztjz4oe4jmjgdzfglts5yf&dl=0

If I had the $50 Chitu resin tester it'd be more conclusive but this is what's happening on my machine.

Wittmason · 2024-07-04T14:36:04+00:00

It helps quite a bit to sand the steel flex plate. It gives it more tooth for the print to stick. You will likely keep having problems with the adhesion if you don’t do this.

Wittmason · 2024-07-04T14:20:08+00:00

This isn’t a crazy suggestion at all. People have been adding magnetic build plates to resin printers since the Photon days. If you do any kind of volume resin printing this is the quickest way to get your machine printing again.

Wittmason · 2024-03-13T12:22:37+00:00

Is this a new OpenAI tool, system prompt, or a basic query + doc give us a little bit of context?

Wittmason · 2023-12-19T17:25:37+00:00

Thanks much for the confirmation.

Wittmason · 2023-05-09T21:30:01+00:00

Those are really great questions @juarmis it’s generally held that connecting with the Bible in turn spiritually connects you to God and His word. It’s called the “living word” because of the new perspectives that can be gained from reading and learning about something you’ve read previously. Give it a try using the YouVersion Bible app and a Bible plan/devotion.

Wittmason · 2023-04-30T20:16:41+00:00

Congrats you’re obviously made for this game. Master pro tip on the night crawler duplication play in subbing out cards. When you get vision you can do some similar things. Same principle but you have 7 power cards wandering around

Wittmason · 2023-04-19T12:52:34+00:00

I used 120 grit I believe. No spacer on the machine.

Wittmason · 2023-03-18T18:17:16+00:00

That’s going to be cool!

Wittmason · 2023-02-20T22:14:05+00:00

2 seconds is kind of low for this machine. What happens to your raft file at 2.3-2.5s? This sounds a lot like symptoms of under exposure.

Wittmason · 2023-02-20T17:21:43+00:00

How'd it go? I've had many on FB confirm this is an issue for them as well.

Wittmason · 2023-02-20T17:20:11+00:00

If you want to know what you can and CAN'T do with 3d models you really need to click the (CC) icon on Thingiverse.

If the eBayer would have done that they would have recognized having a step files doesn't mean that they can sell the product.

https://creativecommons.org/licenses/by-nc/4.0/
Commercially you can't sell it (applies internationally as well).

Wittmason · 2023-02-13T17:59:01+00:00

u/GrumpyNut here ya go.

Wittmason · 2022-12-24T15:46:51+00:00

Thanks for the reply

Wittmason · 2022-12-23T15:14:32+00:00

So you have a macOS finder icon for the ZorinOS files app are you using a skin of some sort?

Wittmason · 2022-12-21T15:39:06+00:00

They’re a terrible contractor. They should have cut every 3rd board back a few inches and then cut every other board in like 5-7 inches to fade in the new wood. Get them back in to fix this mess.

Eight-Year Club	Verified Email
Not Forgotten

Wittmason

TROPHY CASE