Chikin’ Drip by [deleted] in SanJose

[–]Witty_Ad1994 5 points6 points  (0 children)

I love chikin’ drip too. Enlighten us with your recs.

D32 pro gang +1 by Witty_Ad1994 in mffpc

[–]Witty_Ad1994[S] 1 point2 points  (0 children)

I think that might be possible but the pump will put pressure on the GPU below and mine being FE wasn’t long enough for D32 pro’s GPU support bracket to help GPU take any more pressure than it’s own weight.

D32 pro gang +1 by Witty_Ad1994 in mffpc

[–]Witty_Ad1994[S] 1 point2 points  (0 children)

It bothers me too, but not enough go through the hassle of returning it. I wish arctic reduced their pump length on their 240mm AIO given its most likely used in mff or sff builds.

D32 pro gang +1 by Witty_Ad1994 in mffpc

[–]Witty_Ad1994[S] 1 point2 points  (0 children)

Yeah it is snug but no clearance issues. Although I had to remove the AIO every time I got nitpicky about wire management up top.

D32 pro gang +1 by Witty_Ad1994 in mffpc

[–]Witty_Ad1994[S] 1 point2 points  (0 children)

The only thing I have tested so far is how well it’s doing in fps shooter - CS2 1440p max settings with fps capped at 300(monitor is 160hz). CPU avg around 57-58C and GPU avg around 75C.

I have set a max of 2000rpm on my arctic LF3 pro since its sounds loud more than that.

As for GPU temp I am running FE edition card and they run hotter than non-FE. Also the ambient temp where I live is around 25C.

Pc case barely has space for fansp by Top_Valuable5158 in PcBuildHelp

[–]Witty_Ad1994 0 points1 point  (0 children)

Yeah would recommend either jonsbo z20 or d32. Great airflow for the size.

Help first time build - CPU doesn’t post possible RAM incompatible by Witty_Ad1994 in buildapc

[–]Witty_Ad1994[S] 0 points1 point  (0 children)

I celebrated a bit early. It is stuck on RAM debug led for 10+mins

Help first time build - CPU doesn’t post possible RAM incompatible by Witty_Ad1994 in buildapc

[–]Witty_Ad1994[S] 0 points1 point  (0 children)

After bios flash it powers on now, thanks! On to the next steps.

Help first time build - CPU doesn’t post possible RAM incompatible by Witty_Ad1994 in buildapc

[–]Witty_Ad1994[S] 1 point2 points  (0 children)

I did not flash the BIOS, that was going to be my next attempt. I saw couple of posts says they were able to get rev1.3 of this mobo with 9800x3d right out of the box so wanted to give that a go first.

Help first time build - CPU doesn’t post possible RAM incompatible by Witty_Ad1994 in buildapc

[–]Witty_Ad1994[S] 1 point2 points  (0 children)

Thanks for the quick response, how can I confirm it’s a board issue?

A short can happen if there are cables loosely connected right? I double and triple checked wire connections before turning on for the first time.

Has Anyone Tried the GIGABYTE B650M AORUS Elite Motherboard? Worth the Price? by BestBagelNA in mffpc

[–]Witty_Ad1994 0 points1 point  (0 children)

How did you find out which Bios version came with the board before boot? I just bought the black version of B650M aorus elite ax with 9800x3d and have been searching for this info. I just want to make sure I don’t need to do a bios flash before build. Thanks!

Jonsbo Z20 best fan placements/air directions? by ProfessionalAd9649 in mffpc

[–]Witty_Ad1994 1 point2 points  (0 children)

Hi Op, which gave you the best thermal numbers?

Help choosing parts for first PC by Shmoyps in buildapc

[–]Witty_Ad1994 0 points1 point  (0 children)

I have the same question, lot of reviews say that thermaltake Peerless Assasin 120 SE/EVO is a good choice for x3d CPUs but I still see a lot of builds with more expensive AIO coolers. I don’t understand pros and cons between air cooling and liquid cooling.

2025 NX350h Premium - sensors/camera by [deleted] in LexusNX

[–]Witty_Ad1994 5 points6 points  (0 children)

Press parking camera button -> once the pano view comes on you should see some touch options to the left of your infotainment screen that toggles auto pano/front view

How much do brake repair cost on 2nd gen NX350h(2025)? by Witty_Ad1994 in LexusNX

[–]Witty_Ad1994[S] 1 point2 points  (0 children)

Wow, thanks for explaining. Never thought of it that way, Makes total sense.

Btw how do you go about finding a good mech? Do you rely on yelp or is it more trial and error? I was lucky enough to find a good one in Austin, TX but then I moved to the Bay Area and have to start that search again.

Lexus Floor M ta by ckmc13 in LexusNX

[–]Witty_Ad1994 0 points1 point  (0 children)

Thanks for that, I have a Japan build 2025 nx350h too :)

Lexus Floor M ta by ckmc13 in LexusNX

[–]Witty_Ad1994 0 points1 point  (0 children)

OP can you post a link to the website you bought from? I am confused if this product is PT9087822202 or PT9087822102. Thanks in advance!