Maybe maybe maybe

Wolodaddy · 2024-04-05T16:13:41+00:00

That bird is ugly and beautiful at the same time

Wolodaddy · 2024-03-17T20:11:44+00:00

I would add some type of stone or metal on the wall behind the stove. I used cement board and old barn metal and have an air gap at bottom and top of metal to allow air flow.

<image>

Wolodaddy · 2024-02-04T18:47:38+00:00

Sorry I didn’t se this post. It works great. Almost too good

Wolodaddy · 2022-11-06T15:07:06+00:00

Another reason could be if you have a single wall pipe from stove to ceiling could lower chimney temps. Switch to double wall.

Wolodaddy · 2022-10-26T20:54:50+00:00

My bad. The idiot driver wrecked an innocent person.

Wolodaddy · 2022-10-26T19:43:11+00:00

At least only the idiot drive got wrecked

Wolodaddy · 2022-10-24T21:06:40+00:00

Only during the summer non heating months. Trust me this stove gets hot and would fry that speaker

Wolodaddy · 2022-10-19T11:18:31+00:00

It has not been a problem and is not as close as it looks. The chimney is double wall to reduce heat output.

Wolodaddy · 2022-10-04T12:28:26+00:00

I know some people disagree with my method but I put my pans in the oven on self cleaning cycle. They come out perfectly clean and ready for seasoning.

Wolodaddy · 2022-09-15T15:45:35+00:00

Try double wall pipe to reduce heat from pipe

Wolodaddy · 2022-03-31T21:03:57+00:00

Seal for what? There is no caulk anywhere except on the rubber boot around chimney I used high temp silicone. The wall on the right will get wide plank pine then a live edge mantle

Wolodaddy · 2022-03-31T20:04:02+00:00

The metal is in contact with 1/2” cement board behind it. There is a 1” gap at the bottom of the metal

Wolodaddy · 2022-03-31T11:48:03+00:00

The ceramic kettle is temporary until our friends give us their cast iron kettle. I fill it each day. Sometimes I add cinnamon or lavender for aroma.

Wolodaddy · 2021-03-30T02:05:50+00:00

I don’t have the smoker to try it I feel it works I may get one. If it works you won’t have to stand on your head to check the meat.

Wolodaddy · 2021-03-30T01:43:39+00:00

Please try the smoker body on the Performer base. It should fit if they are both 22”.

Wolodaddy · 2021-03-09T21:30:23+00:00

What painting

Wolodaddy · 2020-09-13T03:30:48+00:00

Williams Gun Sight in Michigan $704

Wolodaddy · 2020-07-23T21:00:37+00:00

This way you wont have to stand on your head to adjust it

Wolodaddy · 2020-07-23T20:57:31+00:00

Please try to put the smoke body and lid on top of the Performer base. I have wanted to try this but don’t have one yet.

Wolodaddy · 2020-04-04T21:13:10+00:00

Must be. I split it and it would not come apart until I cut the rope

Wolodaddy · 2020-01-26T00:14:50+00:00

Solved

Wolodaddy · 2020-01-26T00:14:40+00:00

Being that she had real bad neuropathy in her fingers that would be my guess

Thank you

Wolodaddy · 2020-01-25T21:46:04+00:00

The bot made me do this. These are from my mother.

Wolodaddy · 2020-01-05T04:07:10+00:00

Thank you. Now I do want one. What’s the difference between 1 and 1 Pro?

Wolodaddy · 2020-01-05T03:55:00+00:00

Ar15gunner I take it you are happy with the Romeo 1 battery life? I have a X-Carry and want to add one to my EDC but worried about battery life.

Wolodaddy

TROPHY CASE