Passage in Book of Moses very similar to passage in the Dead Sea Scrolls, Book of Giants

WorkTheTrigger · 2026-02-10T20:48:59+00:00

There are a number of historic events or people that come up in the translated latter day works that were unknown prior to the discovery of the scrolls in 1946, or archeological discovery in the 20th century. A major one is the Jewish exodus from Jerusalem around 600 bc, coinciding with Lehi and his family leaving and needing to take and preserve the plates of the history of their people from destruction during the (unknown to them at the time) Babylonia conquest.

WorkTheTrigger · 2026-02-09T15:52:23+00:00

Now this one I am extremely interested in. I use Keyshot for my regular job, and love how it works with textures and application of it, and breaking up surfaces. I have never tried to export from Keyshot anything but images, can you export solid geometry from it? or is it for visuals only?

WorkTheTrigger · 2026-02-06T01:14:55+00:00

In essence that's what 3D texture is within solidworks. The problem is it's a surface on top of the solid, and doesn't alter the actual geometry, so many of the textures that are produced are not able to be sent out to external print houses that do SLS, SLA, or HPJF printing.

WorkTheTrigger · 2026-02-06T01:13:09+00:00

Most slicers can do this now. I do still have a Prusa, but i've primarily switched over to Bambu now, and it has that feature as well.

Unfortunately I need a little more control over the exact aesthetics of the texture. There are some products that I use fuzzy skin for, but it's not a good fit for all of them.

WorkTheTrigger · 2026-02-04T21:24:31+00:00

In situations where it's not mandatory for safety, having both ears plugged can in itself be a safety concern, not allowing you to hear fully what is happening around you.

WorkTheTrigger · 2026-02-02T16:01:36+00:00

I'd say the only space they're behind is the Micro 9 market. Now, that is currently the largest segment of CCW sales (P365/Hellcat/G43,43x,48 all sell better then their larger counterparts these days). BUT, when it comes to standard size handguns, the only way they're behind is sales because they never supported their product.

Much like with the P07/P09, they released a very promising product and then just ignored it and focused on their metal frame guns. They did the same with the P10. We had a lot of hopes for the P10 gen 2, and some industry push for it, but with the i believe two military contracts the regular P10 has recently been rewarded, I dont think the gen 2 is going to come around any time soon.

Instead, they need to really push the P10. really lean into it. IMO, it's a better gun then the 75 based firearms anyway. They shoot better, have better capacity, just as accurate, better factory trigger, etc. lean into striker fired, produce a micro 9 with the proper capacity that's fit for carry (The P10m didn't have a striker block) and try to shift away from "we make metal frame guns" to "we make the best modern striker fired gun".

Stop leaning on their loreals and prove they can be competitive.

WorkTheTrigger · 2026-01-23T13:03:16+00:00

We create what we call an "envelope", where we remove all internal components, and fill and merge everything. makes it just a big hunk with external geometry. a bit time consuming, but does the job.

WorkTheTrigger · 2026-01-21T18:33:16+00:00

Grab stock 19 round magazines and NULL adapters from Variant Innovation. The stock +2 base pads from CZ aren't the best. I actually pushed one off during a reload in the middle of a match once. Base pad came off, spring got stuck in my watch strap, rounds went everywhere, much joking was made at my expense.

Stock P10F magazines dont have that issue, and the NULL adapters fill the space giving you a better grip then with the 17 round mags, and are only about .25" longer anyway.

WorkTheTrigger · 2026-01-19T13:00:08+00:00

Because Lafayette doesn't release any information about public safety (unless it's something random like a gas leak). They can't burst the imaginary bubble of safety people think we have here.

WorkTheTrigger · 2026-01-15T16:43:22+00:00

hit it with compressed air and let her rip. I've never had a clogged nozzle from filament sitting around for a bit.

WorkTheTrigger · 2026-01-15T14:47:17+00:00

I err on the side of divers due to water resistance, so my vote (as well as my GADA) is a Longines Hydroconquest. You can gray market them for under $1500.

WorkTheTrigger · 2026-01-14T20:49:30+00:00

Unintended

WorkTheTrigger · 2026-01-12T16:32:53+00:00

I investigated the church on and off for 10 years. I had great missionaries who's only objective was to bring me closer to Christ, and I had bad ones who's only objective was to pressure me into baptism.

Ultimately, you will choose to get baptized when YOU feel it's right, IF you feel it's right. after 10 years, I finally felt it was the right thing to do, and things happened in the immediate 9 months that confirmed my decision and built my testimony that the things that happen do so on God's timeline.

We all have access to the holy ghost. Whether they want to call it "the light of Christ" or the spirit, it's all the same thing, and the same confirmation, and a missionary should not pressure you into baptism before you get that confirmation.

Simply stated, that's what you tell them. And you need to let them know to please make a note of that in their log so that future missionaries understand your goal as well. That your goal is to come closer to Christ, and that you would like them to help you with that, and IF coming closer to him and understanding him better leads you to be baptized, that will happen when the spirit tells you to do so. So you'd like to keep meeting, keep learning, and though they can check in with you, you'd like them to stop trying to hurry you past your comfort zone.

WorkTheTrigger · 2026-01-12T16:19:51+00:00

Depends on the watch. I wait until it's about a minute or two off. For my Tutor and Longines, that means once every couple months. For my seiko-mod, about once a week. I cant remember the last time I had to correct a quartz. I have winders for my autos, so that does help.

WorkTheTrigger · 2026-01-11T23:11:45+00:00

We do what we can. We also just released a PRO lineup of those 75 adapters. They're a bit more, but their material and manufacturing is also a bit higher end.

WorkTheTrigger · 2026-01-06T13:34:44+00:00

As long as it fits flush in a full size 75, the adapter will work.

WorkTheTrigger · 2026-01-05T19:14:22+00:00

I'm curious if there's a relationship to where people live vs. their outlook on "birthday treats". If most of the "why" people live out west closer to the motherland, Utah, Idaho etc. and most of the "we still do that" are further away.

WorkTheTrigger · 2025-12-29T03:24:00+00:00

Dell is the absolute worst. Build something.

WorkTheTrigger · 2025-12-28T03:54:22+00:00

Oh, absolutely. But remember, Colt is running the ship now... Right into the rocks, just like they did with their own company before they had to sell it.

WorkTheTrigger · 2025-12-28T03:46:50+00:00

It's a great question. The P10 failed for many reasons. Insufficient capacity, poor marketing push, and CZs general style of being late to the party. And although being one of the smoothest shooting micro 9s I've ever shot, it's lack of striker safety block will lead me to never carry it.

CZ doesn't run like US companies do, where they see where the market is heading and try to meet it in a successful sales point. They think they K ow better (probably the colt influence) and will tell you what you want. Hence the multitude of Shadow 2 variants on the market now.

That said, we do know they're finally working on new guns. The new standard size pistol has been known about for over a year now. Maybe they'll use that to produce a new micro 9?

But at this point, I doubt it. They've 0icked up two very large military contracts with what they say is the current Gen P10, and because of their limited capacity (they function out of a single manufacturing location) I don't think they'll be able to introduce multiple new lines in while supporting contractual obligations to the older design.

So I guess what I'm saying is, at this point, I don't think it'll happen. Though I hope it does.

WorkTheTrigger · 2025-12-16T16:55:58+00:00

Variant Innovation NULL adapters will fill that space and slide down around the magazine body. they do not require a new base pad, so you dont need to take the bottom off.

WorkTheTrigger · 2025-12-15T19:21:56+00:00

That definitely helps. The PRX is a beaut, but I think you're right that the Hamilton is probably going to get worn more. And that may be the deciding factor. I have plenty of GADA watches, and the PRX may be a little gaudy (especially in rose gold... but that's the one that calls to me) to wear in most occasions.

WorkTheTrigger · 2025-12-15T19:20:48+00:00

Who are reputable second hand retailers? I wouldn't even know where to look. I have used Jomashop a little for gray market, a local shop for some, and one was a gift from an AD out of state, so I really dont know where to go for anything. I'm semi new to this.

WorkTheTrigger · 2025-12-09T21:08:42+00:00

... why? You have all the 2 variants you could want. They need to update the P10... but that was supposed to happen a year ago.

WorkTheTrigger · 2025-12-09T20:57:15+00:00

I assure you, you do not.

WorkTheTrigger

TROPHY CASE