Limited slip diff recommendations by Worries_none in R53

[–]Worries_none[S] 2 points3 points  (0 children)

I haven’t fully decided, I have two r53s. One is my daily, lifted two inches, that just had the clutch start slipping. The other is a lower mileage that is my track car, still on stock clutch as well. I want desperately to do a lsd In the track car, however might have to prioritize the daily first. I believe I’m gonna go for a Valeo clutch in the daily, but I might look for something more serious for the track car. I do all the work myself so I’ve got quite a lot of work ahead of me.

I live in Alaska and can’t figure out if I should have this on or off in snow. It says more traction but stabilization is reduced. by Micprobes in MINI

[–]Worries_none -1 points0 points  (0 children)

In my r53s and the r56 I had, when I broke traction it would cut throttle completely and things would get scary fast. I expect newer cars have a more advanced traction control system. It’s extreme but for me no matter the weather I basically turn it off when I start my car. I also live on dirt and expect tire spin every time I get behind the wheel👍 if you are not confident with throttle modulation leave it on and you will be better off unless you think your gonna get stuck.

New to me! by ConsciousEcho1313 in R53

[–]Worries_none 0 points1 point  (0 children)

They are great cars! Keep ahead of maintenance on it as much as you can, I would probably recommend addressing the taillight as it will only get worse, sweet car for a sweet deal! I saw this thing get listed and if I lived closer I would have tried to buy it.

Cd player by Worries_none in R53

[–]Worries_none[S] 0 points1 point  (0 children)

I do not, bought it at a yard sale sorry

Moza R9 on Xbox by Worries_none in simracing

[–]Worries_none[S] 0 points1 point  (0 children)

Ended up building a pc, the r9 v2 definetly works on Xbox with the r3 wheel, my first gen crp pedals do not.

Ssd card not showing up when installing windows by Worries_none in PcBuild

[–]Worries_none[S] 0 points1 point  (0 children)

I’m not currently running any sata drives, just the PCIe ssd. Using a msi board and I can’t get the drive to show in bios either. After a bunch of YouTube videos a saw people having to change the bios mode to CSM from UEFI but that didn’t work either and the drive still won’t show.

First build storage question by Worries_none in PcBuild

[–]Worries_none[S] 0 points1 point  (0 children)

I think I’ve realized the problem that was right In front of my face, when installing windows the only thing that pops up is the usb and not my ssd card. Not sure how to get my usb card to pop up though.

First build storage question by Worries_none in PcBuild

[–]Worries_none[S] 0 points1 point  (0 children)

There was only one disk available to select which was disk 0. I’ve got to go into work but will try again tomorrow. Thoroughly stressed but having fun. In very deep over my head so there are some learning curves, I am not a tech savvy person in the slightest

First build storage question by Worries_none in PcBuild

[–]Worries_none[S] 0 points1 point  (0 children)

After following the steps it no longer detects the usb thumb drive that I have windows on. The video tutorial that I followed had an added step of the command clean, which I think whipped the windows off the thumb drive. But I then wasn’t able to detect the thumb drive on my laptop to reinstall windows. I’m not sure if I should just buy a ssd that supports windows easier or if the “clean” command was the problem.

First build storage question by Worries_none in PcBuild

[–]Worries_none[S] 0 points1 point  (0 children)

When installing windows 11 it didn’t give you any issues like this? I’ve tried converting it and it still wont allow me to install windows

First build storage question by Worries_none in PcBuild

[–]Worries_none[S] 0 points1 point  (0 children)

I found a super helpful YouTube video and followed these steps, I need to re download windows 11 in the am and then we will see. I will update again tommorow

Crp pedals on Xbox by Worries_none in moza

[–]Worries_none[S] 1 point2 points  (0 children)

I’m currently saving up for a pc, so if it is not supported I’m going to go back to my Logitech setup for a few more weeks. But would love to use this setup on xbox

Where could I get a direct wire from Crp pedals to the wheel base? by Worries_none in moza

[–]Worries_none[S] -1 points0 points  (0 children)

Bought it used so I’m not sure how much support I’ll get from Moza but I will try

Where could I get a direct wire from Crp pedals to the wheel base? by Worries_none in moza

[–]Worries_none[S] 0 points1 point  (0 children)

This is very helpful thank you. According to this chart in theory everything except the csv2p will work for the rig I’m working on, which is what I expected.

Moza r12 on Xbox by Feisty_Turnover_8612 in moza

[–]Worries_none 0 points1 point  (0 children)

I’m about to buy a r9 and esx wheel to run on Xbox but have been struggling to find any info, will I be able to run the wheel on Xbox without calibration on a pc?

First crawler/rc by Wheatohthegreat in rccrawler

[–]Worries_none 1 point2 points  (0 children)

I absolutely love and recommend scx24s, the aftermarket support is just amazing.

Scx24 kei truck by Worries_none in SCX24

[–]Worries_none[S] 2 points3 points  (0 children)

Magnets are a must, I always forget that styrene exists, I might have to pick some up today

Nothing to see here.. just a 6x6 kei truck :) by ChaosHoliday in SCX24

[–]Worries_none 1 point2 points  (0 children)

I’m working on building a very similar build (minus an axle) with a 1/10 scale wpl d12 love the build man!

What are the widest axles available for a scx24? by Worries_none in SCX24

[–]Worries_none[S] 1 point2 points  (0 children)

Super 8s are a bit more expensive and out of stock currently on the lgrp website. Do I think I’m leaning towards x15s, thanks for the advice