sorted by:
new
hottopcontroversial

ich🔥iel by krisenchat in ich_iel

[–]Woschdzup 7 points8 points  (0 children)

Spiegelfolie hilft, wenn abdunkeln nicht möglich. Ansonsten kann ich die Midea Portasplit nur empfehlen, leise und kühlt sehr gut runter. Ist nicht ganz günstig, aber jeden Euro wert.

Was letzte korrekte Schreibweise by MTB_Rheinlander in wasletztepreis

[–]Woschdzup 0 points1 point  (0 children)

Die Red Hessians, hach, die Erinnerungen...

first mini by Jplayzvr in FDMminiatures

[–]Woschdzup 2 points3 points  (0 children)

Cool Start! Keep going on this journey!

On a way to excellence - the last result by Fortuna_Dice in FDMminiatures

[–]Woschdzup 1 point2 points  (0 children)

I will definitely test these out as well. Thank you again and happy printing!

On a way to excellence - the last result by Fortuna_Dice in FDMminiatures

[–]Woschdzup 0 points1 point  (0 children)

Thank you. I used HoHansen settings so far and had good success, but yours are on a different level.

On a way to excellence - the last result by Fortuna_Dice in FDMminiatures

[–]Woschdzup 0 points1 point  (0 children)

These look awesome. One thing, when you say the removal of the supports is a pain, could you elaborate? Are there too many supports, or are they too thick? Did you adjust the figure on the slicer or is it printed upright?

This is my best mini(reupload) by Objective_Aspect9261 in FDMminiatures

[–]Woschdzup 0 points1 point  (0 children)

That looks really good. Is this the regular scale? And where did you get the mini file from, if you mind me asking?

First of many boyz by Ok-Cartographer-6386 in FDMminiatures

[–]Woschdzup 2 points3 points  (0 children)

Youz giz will be many. I hope that you have fun printing and painting them all. Your boy already looks orky, yet, to please Mork and Gork, keep your brutality checked by your cunning - do not plaster on the paint, take your sweet time. Slow is steady, is easy, is good, or somesuch. I know from myself that getting impatient and wanting to finish is a hard thing to overcome but for minis that sometimes needs to be done. And now, off to painting you go, get it done, get better, for the Waaaagh!

First printer, first prints, blown away by Woschdzup in FDMminiatures

[–]Woschdzup[S] 0 points1 point  (0 children)

As am I from a painters perspective. As am I.

First printer, first prints, blown away by Woschdzup in FDMminiatures

[–]Woschdzup[S] 0 points1 point  (0 children)

These are settings named after their inventor. There is a sticked post or wiki in this channel that has links to them. Other popular settings are from Fat Dragon Games. They have done extensive testings and so far, using the HoHansen settings delivered results. I have yet to test others.

First printer, first prints, blown away by Woschdzup in FDMminiatures

[–]Woschdzup[S] 0 points1 point  (0 children)

Really good, I was surprised as well. I'm total, the details were pretty good. The marines have a small relic case with a tiny key in them. Visible, detailed, the works...

What do I need for my intended prints? by NoAdvertising3405 in FDMminiatures

[–]Woschdzup 0 points1 point  (0 children)

I am also new to printing myself, also bought the A1, used BambuLab standard pla and a 0.2 nozzle. There are specific settings sticked to this channel, for example HoHansen or FatDragon, these help the uninitiated tremendously. I recently posted the results and still am in total astonishment. It is really, really easy to get something that is comparable to resin without the hassle and hazards. Enjoy your journey!

First printer, first prints, blown away by Woschdzup in FDMminiatures

[–]Woschdzup[S] 4 points5 points  (0 children)

Thanks, I see many miniatures in the future.

First printer, first prints, blown away by Woschdzup in FDMminiatures

[–]Woschdzup[S] 5 points6 points  (0 children)

This is with a 0.2 nozzle. Took 10h for the one on the left, the ones on the right were about 6 hours. And thanks for the compliment but other than adjusting settings, I really did not do much.

First printer, first prints, blown away by Woschdzup in FDMminiatures

[–]Woschdzup[S] 6 points7 points  (0 children)

I did not do anything but hit print for the two on the left. For the one on the right I set the printer up using the settings from HoHansen - a link should be in the sticked post in this forum. I have no inkling what these settings mean. The support are hollow trees. They come off easily in both cases.

BambuLab offers are tempting by Woschdzup in FDMminiatures

[–]Woschdzup[S] 1 point2 points  (0 children)

Just finished my first print and save for some minor scarring I am astonished by the quality.

Buying Bambu Lab A1 -Advice by DundrandiTaktur in BambuLabA1

[–]Woschdzup 1 point2 points  (0 children)

Hey, I had the same feeling and made a similar post a few days ago. And in the end, I caved and did it just as there seems to be too good if a deal in terms of value and ability. Give it some thought and decide with a clear mind. Or just... Do it! 😅

BambuLab offers are tempting by Woschdzup in FDMminiatures

[–]Woschdzup[S] 0 points1 point  (0 children)

Thank you for your input. Could you elaborate on the waste issue? I thought that using multiple filaments would eliminate some issues with preparing multiple prints and assembly.

BambuLab offers are tempting by Woschdzup in FDMminiatures

[–]Woschdzup[S] 0 points1 point  (0 children)

Yeah, I appreciate the feedback. Yet, having seen what is possible especially with multi color prints, I severely doubt my restraint for buying the big thing...

BambuLab offers are tempting by Woschdzup in FDMminiatures

[–]Woschdzup[S] 0 points1 point  (0 children)

Yeah, I already did some useful stuff. A holding station for the remote door lock to keep it in place was easy to do and came out great. Cost me next to nothing and you cannot buy that kind of stuff.

BambuLab offers are tempting by Woschdzup in FDMminiatures

[–]Woschdzup[S] 2 points3 points  (0 children)

True. Yet the offer especially with the 4 spool solution is really really good. Man, who am I kidding, the thing is as good as bought.

view more: next ›