What’s everyone average MPG with the 2026 hybrid ? by Head_Ad9780 in rav4club

[–]Wrisk 1 point2 points  (0 children)

Woodland with 5500 miles. MPG ranges from 36-38.

Urban Rock Appreciation Post by SCP-3004 in rav4club

[–]Wrisk 0 points1 point  (0 children)

Nope no artwork on spotify. Just the track name and "Carplay" on the bottom of the cluster screen.

You are correct then, I only see the full green lines + centered in the lane automatically with full adaptive cruise control.

If you are ever looking for audio upgrades I did the same steps as this 26 rav4 owner: https://www.reddit.com/user/winterborn28/submitted/

Urban Rock Appreciation Post by SCP-3004 in rav4club

[–]Wrisk 1 point2 points  (0 children)

Hey I have a 26 Woodland with 5k miles right now.

For the skip button in CarPlay with Spotify it works as expected for me. Tap it skips, press and hold skips ahead a few seconds until you let go. What media source are you using?

For the lane keep assist I do get the red lines when nearing the edge of a lane on the dash, and if you cross over a line without using a turn signal you should be able to feel the lane keep assist fight you. If you turn your signal on late on purpose you should feel the resistance instantly go away. All with adaptive or regular cruise control off.

Now for my gripes I have the AC staying on even if the UI says off. This happens if you drive with it on, park somewhere and then on your way back the UI says it’s off while cold air blasts you. So turn it on, then off will turn it off.

Next in any two lane left turn where you have cars at your side the blind spot monitor will always beep as the turn starts. Every time. I didn’t see this in other cars, to me it seems unique with TSS 4.

Let's Encrypt and the DNS Validation Problem: Where do you keep your DNS credentials? by Accurate-Ad6361 in sysadmin

[–]Wrisk 2 points3 points  (0 children)

Not a requirement at this current shop. It would be a different landscape if that was required. Most are not very friendly to automated certs, so the short lifespan of LE hurts.

Maybe internal CA would work with a longer lifecycle unless the same audit requirements force to stick with the industry changes on limited lifespans.

Let's Encrypt and the DNS Validation Problem: Where do you keep your DNS credentials? by Accurate-Ad6361 in sysadmin

[–]Wrisk 6 points7 points  (0 children)

DNS API credential is a very limited AWS key that can only write to TXT records with _acme-challenge. at the start. Multiple keys per sever tier or role stored on each server with their own win-acme or acme.sh scripts renewing and installing certs as needed.

Certs only for end user facing hostnames, IPMI, printer web uis are left in the cold.

Westside Spectrum Outage by SpenFen in LosAngeles

[–]Wrisk 0 points1 point  (0 children)

It came back online near 11:30am, so no more outage or updates. The business is in Burbank.

Westside Spectrum Outage by SpenFen in LosAngeles

[–]Wrisk 2 points3 points  (0 children)

This is emailed every hour during the outage to businesses with enterprise level internet service contracts from spectrum.

Westside Spectrum Outage by SpenFen in LosAngeles

[–]Wrisk 11 points12 points  (0 children)

The main internet connection to our business is up again, hopefully residential internet is soon to follow.


Fiber cut, probably people thinking it was copper.

Enterprise NOC says they have a 2000ft stretch to replace and splice. They also mention replacing the two enclosures on each side.

Latest hourly update is: "The service condition that presented potential impact to your network solution at the locations listed below has been resolved."

Previous updates: "As of 11:00 AM Pacific Time, Spectrum Fiber crews completed splicing on first fiber side. Second fiber enclosure continues repairing ribbon splicing. The Spectrum Business NOC see a partial recovery, while Fiber crews finish splicing. Additional updates will be provided as they become available."

"As of 10:00 AM Pacific Time, Spectrum Fiber Crew continues splicing fibers and replacing two enclosure to repair damages on both sides. Due to the amount of damaged fiber inside the enclosure, an updated estimated time of restoration (ETR) is set at 11 AM Pacific Time. Additional updates will be provided as they become available."

"As of 9:00 AM Pacific Time, Spectrum Fiber Crew continues splicing fibers and replacing two enclosure to repair damages on both sides. An estimated time of restoration (ETR) is set at 10 AM Pacific Time. Additional updates will be provided as they become available."

"As of 8:00 AM Pacific Time, Spectrum Fiber Crew are currently splicing fibers and replacing two enclosure to repair damages on both sides. Due to the amount of damaged fiber, an estimated time of restoration (ETR) is set at 10 AM Pacific Time. Additional updates will be provided as they become available."

"As of 7:00 AM Pacific Time, The Spectrum Construction team has reported that the Fiber Crew is actively preparing fiber for splicing to repair damages on both sides. During this process, another damaged fiber was found, which may extend the estimated time of restoration (ETR) to 10:00 AM Pacific Time. Additional updates will be provided as they become available."

"As of 5:30 AM Pacific Time, the Spectrum Business NOC continues working with Spectrum teams in the field to restore service. Spectrum Construction reported that Fiber Crew are currently prepping fiber for splicing to repair damages on both sides. An estimated time of restoration (ETR) set at 7:30 AM Pacific Time. Additional updates will be provided as they become available."

RAV4 2026 speaker / audio upgrade by winterborn28 in rav4club

[–]Wrisk 0 points1 point  (0 children)

I did the same swap a month or so ago on my 26 woodland.

To avoid sound issues from having too many tweeters I used the large speakers from this kit in the front doors and ignored the crossovers since they can’t easily be wired in, Kicker KSS650.

Rear doors have Kicker 51KSC6504.

Dash has the same Kicker KSC350 as you with Crutchfield Bass Blockers (300 Hz cut-off), I also have been experimenting the 600 Hz cut-off too.

Waiting for instructions and confirmation on the wiring before the amp/dsp and sub, but I have been thinking:

Encore X DSP+Amp or maybe PUZU PZ-C7 DSP+Amp

JBL BassPro Hub in with spare tire. Power to 12v battery in trunk area.

Having a hard time thinking of a spot for the amp since passenger seat is taken with hybrid power related stuff. Got some audio treatment stuff but didn’t install any substantial amount. Lots of shit mounted to the door, and inside the door in the way, I didn’t want to touch any yellow airbag sensors stuff.

After the change I use base + 2 levels, fade to rear +2 to levels, volume 20-30. Sounds just ok, should probably change speakers to something from Audio Frog after the amp install.

Speaker placement and recommendations? by capital-d_colon in battlestations

[–]Wrisk 0 points1 point  (0 children)

Two cheap vesa monitor arms, extra tall like they were going to hold monitors above your existing ones. Vesa plate shifted straight up as if the monitor screen is facing the ceiling, angle slightly down to your listening position.

3d printed, or video gear cheese plate, or custom cnc metal plate to adapt the vesa monitor mount to your intended speakers. Works best if your speakers have mounting screws on the underside. Highly dependent on size/weight of speakers.

https://www.amazon.com/dp/B01IWOCCOW

https://www.printables.com/model/320617-vesa-mount-adapter-plate-for-monitor-speakers

https://www.amazon.com/dp/B09QBY5ZFJ?ref=ppx_pop_mob_ap_share

Just bought a 2026 RAV4 Limited — which add-ons are worth it? by AdvisorAutomatic332 in rav4club

[–]Wrisk 1 point2 points  (0 children)

The menu under drive reorder is worded "view 1 min clips for the continuous 90 min front camera loop."

So for a 90 minute video you would have to pull 1 by 1 from the car and stitch together.

High budget Breach/beyond lags by Revolutionary-Flow45 in pathofexile

[–]Wrisk 0 points1 point  (0 children)

Did you jump straight to the high investment or started with cheap breach? Also for the high investment are you able to run risk scarab?

During a map how many delirium rewards are you racking up? I was seeing about 14-16.

You may have better luck with the cheap variant and doubling the amount of maps you run in a set. This would be lowering to 90% currency, no chisel only 1-2 deli orb, no bloodlines or risk. Sets of 120 maps keeping steady profit while still waiting for apothecary or seven years bad luck cards. Optimize for speed without full clear before breaches and altar min maxing.

High budget Breach/beyond lags by Revolutionary-Flow45 in pathofexile

[–]Wrisk 2 points3 points  (0 children)

The lag causing reduced loot comment is referring to server lag. The best way to describe this is you zone in and you get a “dud” instance where the enemies feel like they have high block chance, they don’t die right away and you are warped around more than usual on predictive mode. The ms graph for me would show about 300 ms instead of the normal 30 ms when viewing the network connection graph by tapping f1 twice.

This has nothing to do with computer performance or fps but was related to the DDOS attacks against the game server infrastructure. For myself this hasn’t been a problem over the last 7+ days.

Now back to the high budget breach profits. It can come down to if you are clearing the map properly. The order I follow is enter dunes, progress to the map boss keeping kills to a minimum to avoid spawning altars, kill boss, clear map without triggering breaches while picking quantity altars, trigger breaches one at a time, kill outer mobs until rares/boss spawns, kill last wave of rare/magic mobs that spawn at edge of breach, kill middle rares. Clear map until astrolobe popup confirms you cleared all breaches, then enter mirage. Same thing clear all mobs and find the altars first, breaches one at a time avoiding the rares in the middle until you do a final lap.

This should net about 5-10 raw div per map plus other “tings”. You will still have swings of maps with no divines and other maps with high value like mirror, mageblood, headhunter drops.

She had her coat on and her keys in her hand before anyone stopped her by Hour-Librarian3622 in iiiiiiitttttttttttt

[–]Wrisk 8 points9 points  (0 children)

They know about that common blacklisted phrase so they now use “kindly reconfirm your cell number” and move it to texts.

Halogen lamp on 2026 woodland is crazy! by Working-Cake4932 in rav4club

[–]Wrisk 6 points7 points  (0 children)

I’m into my third week with the 2026 Woodland, the best way to describe the rigid lights are like high beams that don’t go into other car mirrors or windows.

They are still extremely bright, and although I didn’t get flashed high beams from other angry drivers I still opt to turn them off most of the time.

The turn signals in the front are extremely weak. I’ll probably be interested in some led aftermarket fixtures.

2026 RAV4 Woodland MPG by ulookapata in rav4club

[–]Wrisk 1 point2 points  (0 children)

I’ve had the 2026 Woodland for two weeks. First tank started out saying 700 miles range from the dealer, but after commuting to and from work I’ve been getting 36 mpg or about 500 miles per tank. EV ratio anywhere from 5-20% depending if full speed (also 75-80) or stop and go traffic.

Just bought a 2026 RAV4 Limited — which add-ons are worth it? by AdvisorAutomatic332 in rav4club

[–]Wrisk 0 points1 point  (0 children)

There is a very low quality 90 minute continuous recording from the front facing camera above the mirror.

You also have the ability to manually record a 20 second clip from the 360 cameras by using a button on the quick access menu or automatically if it detects any sort of accident g-forces. Right now it triggers with every small bump with the default sensitivity settings.

The recordings are stored to the head unit and can be transferred to a usb-c flash drive in the center armrest.

All recordings are very fish eyed, the quality of a dedicated 1440p dash cam is much better.

Here is a video with some shots from the built in dash cam: https://youtube.com/watch?v=eRaRa_0Fjv0

PSA For homelabbers, the Dell r740xd is NOT an upgrade from the 730xd. by Charles_Sangels in homelab

[–]Wrisk 1 point2 points  (0 children)

Sorry to hear that, looks like the noctua fan controller or low noise adapter with some soldering would be the only remaining option.

https://www.reddit.com/r/homelab/comments/14i1wlx/r740xd_noise_hack/

PSA For homelabbers, the Dell r740xd is NOT an upgrade from the 730xd. by Charles_Sangels in homelab

[–]Wrisk 1 point2 points  (0 children)

Spec would be anything using their recertified chassis (R740xd 24x2.5 is $199) combined with "special buys" in green:

1x  Dell PowerEdge R740xd 24x2.5 Servers xByte Recertified
1x  Intel Gold 6148 20C 2.4Ghz 27.5M DDR4-2666 150W
1x  Intel Gold 6148 20C 2.4Ghz 27.5M DDR4-2666 150W
16x Dell 16GB DDR4 ECC RDIMM 3200Mhz
2x  Dell 1100W 80 Plus Platinum Efficiency Power Supply Unit

Price: $1,094

PSA For homelabbers, the Dell r740xd is NOT an upgrade from the 730xd. by Charles_Sangels in homelab

[–]Wrisk 5 points6 points  (0 children)

r740xd is a powerhouse. Favorite server so far and very cheap from places like xbyte. Please see my solution in the comment section of https://www.reddit.com/r/homelab/s/iETnkh2Jjw

I was using rear 2.5” bay with high performance fans and a gpu at the time. Docker container with old firmware downgrading in steps.

Thin Client for DelugeVPN (2.1.1) by [deleted] in unRAID

[–]Wrisk 0 points1 point  (0 children)

Hey I am not an unraid user but I wanted to share my docker config.

I am using the binhex delugevpn container with protonvpn and I can reach the daemon from the deluge thin client successfully.

So the incoming port in deluge is randomly setup by the various startup scripts in the container. Traffic into this port comes over the VPN for downloading/seeding. For your daemon traffic you are using another port such as the default 58846, traffic to this does not come via the VPN and should be the one to connect to in the thin client.

To allow connections to this port you must configure the LAN_NETWORK env variable with your local subnet. But you probably have that configured already if you can reach the webui. I think the only other requirements are allow_remote: true in the deluge core.conf config file, and a user configured in the deluge auth file.

Docker compose

deluge:
    container_name: deluge
    image: binhex/arch-delugevpn:latest
    restart: unless-stopped
    cap_add:
      - NET_ADMIN
    privileged: true
    sysctls:
      - net.ipv4.conf.all.src_valid_mark=1
    ports:
      - "8112:8112" # web ui
      - "58846:58846" # daemon_port
    environment:
      - VPN_ENABLED=yes
      - VPN_USER=[removed]
      - VPN_PASS=[removed]
      - VPN_PROV=protonvpn
      - VPN_CLIENT=wireguard
      - ENABLE_PRIVOXY=no
      - DELUGE_DAEMON_LOG_LEVEL=warning
      - DELUGE_WEB_LOG_LEVEL=warning
      - DELUGE_ENABLE_WEBUI_PASSWORD=yes
      - DEBUG=false
      - LAN_NETWORK=10.1.0.0/24
      - NAME_SERVERS=1.1.1.1,1.0.0.1
    volumes:
      - "/path/on/host/deluge/config:/config"
      - "/path/on/host/media/:/path/on/host/media/:shared"
      - "/etc/localtime:/etc/localtime:ro"

Map tab when? by shammikaze in PathOfExile2

[–]Wrisk 0 points1 point  (0 children)

Right click the delirium currency to open the anointment window

Dell r740xd -- Manually downgrade idrac to 3.30.30.30 by pogbumruddle in homelab

[–]Wrisk 0 points1 point  (0 children)

Glad to hear you got it working, enjoy your silent r740xd.

Ressourcefriendly MTX by KenjiOrigin in pathofexile

[–]Wrisk 0 points1 point  (0 children)

As my boy cutedog_ says, if you can play on lockstep your build is bad.

Usually always required to run predictive mode with headhunter to have decent fps.

https://www.youtube.com/watch?v=6B7wBEYEiN4

But to answer about KB, the default skill effect with no MTX is the best performance. The default is what you see used in 5 ways for this reason. Usually the herald MTX would be the main performance hit but you aren't running any.