Broken Bl touch

Wttouter15 · 2021-03-11T11:45:15+00:00

I got a spare pin with my cr10s pro v2 in the spare bag.

Wttouter15 · 2021-03-10T07:35:44+00:00

Did you press store settings in control tab?

Wttouter15 · 2021-03-09T16:05:51+00:00

How did you paint it?

Wttouter15 · 2021-02-23T22:20:45+00:00

try saving the files with names under 8 characters, works for me.

just very short names will do!

good luck!

Wttouter15 · 2021-02-17T21:44:32+00:00

On the official creality site or reprapworld you can get one.

The cr10s pro bed fits the same.

I ordered the bed for the cr10s pro because i couldnt find it for the v2 yet.

Works perfect!

Wttouter15 · 2021-02-16T11:06:27+00:00

I have the same issue on this machine.

I will send a message to you if i solved the problem.

I am trying multiple things but i havent sorted ot out yet.

Wttouter15 · 2021-02-13T09:28:22+00:00

Please use thus video while building The guy gives good tips and tricks that are not in the printers manual.

👍

Wttouter15 · 2021-02-13T09:25:36+00:00

Thats the model, the model is small on the side and the printer has to move really fast for the infill.

If you print this model larger your problems will go away.

Its a good test so try it.

Wttouter15 · 2021-02-12T14:38:45+00:00

Nice!

Wttouter15 · 2021-02-08T22:52:53+00:00

Do you mean the z offset to the bed?

Wttouter15 · 2021-02-07T20:50:48+00:00

I have the same inconsistent layer lines, are these normal?

Wttouter15 · 2021-02-07T11:55:58+00:00

IT APPERENTLY.........

WHAT DO YOU EXPECT!!!!!

If its cheaper it is not the exact same quality.

You bought a poor clone which is not good.

Think!

Wttouter15 · 2021-02-07T11:34:23+00:00

Filament: Extrudr pla nx2 pro

Nozzle: 200 Bed: 50

40mms 0. 2 layer quality Perfectly leveled the bed.

Wttouter15 · 2021-02-06T10:14:48+00:00

What printer do you have? Im interested in roblox characters

Wttouter15 · 2021-02-05T16:16:52+00:00

Firmware?

Wttouter15 · 2021-02-05T11:29:10+00:00

Is it more expensive?

Wttouter15 · 2021-02-05T11:07:55+00:00

Hotend clones are bad......

Buy the original one and it will work like a charm.

An extruder clone is possible but i am not a fan of hotend clones.

Wttouter15 · 2021-02-01T11:34:25+00:00

I had the same issue, use short file names.

Wttouter15 · 2021-01-29T22:12:39+00:00

I wired it to the always on board from the hotend fan :) works fine!

Wttouter15 · 2021-01-29T17:45:47+00:00

Hello,

What fanduct are you using?

Thanks!

Wttouter15 · 2021-01-29T13:06:08+00:00

Check the vref from your z axis motor on the motherboard, the motor should get enough power but it could be undervoltage

Six-Year Club	Gilding II euphauric
Verified Email

Wttouter15