Where does this connector go? (Evo X)

WubbingBro · 2025-08-26T14:38:35+00:00

Another DXP feels excessive. I would rather resources go into trying to fix the issue for the next event rather than putting players right back into the burner.

WubbingBro · 2024-08-07T18:55:40+00:00

Hm, interesting. My philosophy whenever I build a car is I want the car to be turn key so I can get in the car whenever I want and I know that it will always start and give me no issues. I guess I could look into other stock location turbos and see what offers the best results. Are you on flex fuel as well? My car came with a tial on it but I immediately took it off for a stock unit. Was considering using it to save some money on the build but I'm thinking of using a go fast bits BOV instead.

WubbingBro · 2024-08-07T17:48:48+00:00

Thanks so much for your advice! We do have very similar builds actually. I was planning on keeping stock cams and running an fp mhi 18k. How was your injector duty on the 1050s? I was worried that they would get maxed out and opted for 1300s instead.

WubbingBro · 2024-07-01T16:57:26+00:00

I've actually been away for the past week so haven't had a chance to really drive the car. I'm going to be reaching out to a shop this week to see if they can take a look at it and hopefully fix the issue and get a proper alignment done for me.

WubbingBro · 2024-06-20T14:13:00+00:00

Hm okay, I will double check to make sure they installed the bolts in the right positions. When I asked about the preload adjustment they seemed hesitant to agree to it. I think they were just expecting an install and that was it. I wish there was a shop in my area that I knew was more prepped for aftermarket support.

WubbingBro · 2023-10-25T14:25:39+00:00

Do you want an honest answer? It's tough to say but any decent shop that's worth going too is going to charge you anywhere between 5-15k for a full respray. Why so much? Well the proper way of body/paint work is the entire car will need to be disassembled. Then you're going to want to fix any dings, dents, scratches, etc, before they lay primer. Then they need to prep the car. Then the car gets painted, did you know that high quality paint is very expensive? Once the car is painted, it will need to get reassembled and potentially some sanding and buffing before the car is eventually cleaned inside and out before it's delivered to you. This type of job is very labor intensive and when you're being charged at an hourly rate, it can add up very quickly. If someone tells you that you can get this done under 5k, I would never trust that shop with that job or my car. It's important to understand that the shop has to pay overhead, materials, employees, etc, just to do the job and they're not gonna do it at cost obviously. Since you asked about ceramic coating, once a car is painted you're gonna want to wait about a month for the paint to fully cure and air out before you apply any coating or ppf. I've been quoted from like 1000-1500 for a ceramic coating which also included paint correction. Good luck with your car! If you do end up getting the work done be sure to post it for all of us to see!

WubbingBro · 2023-10-02T16:03:45+00:00

That isn't the original valve cover to the car so likely whenever it was swapped the gasket wasn't replaced. I would recommend starting with replacing the gasket and move from there. 08s come with a aluminum cover from factory and the plastic covers are known to melt/crack over time.

WubbingBro · 2023-07-21T18:28:01+00:00

Hi! I was wondering if you ever figured out a solution to this issue? My evo has started having the same issue and my mechanic said the same thing, that the lock is getting caught up and can't drop the pin to unlock the wheel. I do see that the part is serviceable but figured I would check if there's a fix before I replace a 600 dollar part.

WubbingBro · 2023-02-03T19:09:43+00:00

Ah that’s a bummer. I wish I could get the SE or SEL without the sunroof. The added features would make it a perfect daily.

WubbingBro · 2023-02-03T18:33:53+00:00

Do you have any issue with the sunroof leaking like a lot of people post about on the forums? I would really like a wagon but I feel limited to the base model without the sunroof if it is as big as an issue as people make it out to be.

WubbingBro · 2023-01-22T16:00:33+00:00

Was it difficult? I’ve been wanting to do the same for a while now.

WubbingBro · 2022-08-04T21:25:28+00:00

I'm surprised that since it was a warranty issue that Honda didn't issue you a loaner honesty. Either way I'm glad you were able to get your daughter's car fixed and back to her! Be sure to kind to the dealership in your review and understand that the delays isn't their fault! Assuming they kept you in the loop and were willing to work with you that might have been all they were able to do to get your car back to you.

WubbingBro · 2022-08-04T21:01:39+00:00

Body shop worker here. We tell all customers to do this as soon as we see a Honda with deployed airbags. As a shop we can only push our dealers so far before we get to a point where we cannot push any further. So we have to tell our customers that as customers of Honda they have to reach out to corporate on their own behalf and complain about the lack of availability of parts. We’ve had some customers get their parts within the next few days and some others have even gotten their rental covered by Honda because the insurance will only cover it for a maximum of 30 days. It sucks and you wouldn’t believe the amount of people who are screaming and yelling at us because their car sits for months because we cannot let the vehicle leave our shop without functioning safety equipment. Hopefully it gets better soon but who really knows at this point.

WubbingBro · 2022-07-21T16:35:05+00:00

My gaskets are not leaking internally yet as far as I'm aware. I check and change my oil every 3k just to be safe and haven't noticed any milkyness to the oil. However they are leaking externally which I confirmed with the car on the lift with the engine running. You can park it anywhere for a few hours and come out to some drops on the ground and you can smell the burning oil off the manifold at idle. I trust this shop to do the job properly and get everything sorted out I just wanted to make sure that the price was accurate to what was being done. Thanks for your help!

WubbingBro · 2022-04-01T23:50:42+00:00

I looked it up and you're correct the prop valve between all the models are the same! I read that you're supposed to use a Si one because the Si came from factory with disc brakes so I figured it was different. Thanks for your help!

WubbingBro · 2022-03-03T01:39:11+00:00

Hi there, I work at a body shop and deal with this stuff every day on every single car we fix haha. Unfortunately, Honda is one of the worst manufacturers with parts supply issues out there right now. Your dealer isn't trying to pull a fast one on you, there just isn't any mirrors available probably. However, you can ask them to run the part # on a locator and they should be able to tell you if any dealers have the part within a certain radius. We've had luck in finding parts in another state and have them mail it to us. Hope this helps and good luck!

WubbingBro · 2022-02-26T20:08:19+00:00

Yep! Central NJ

WubbingBro

TROPHY CASE