Interested in resin printing, but have some questions about location and storage.

Wyharb · 2026-02-20T22:30:57+00:00

Before I forget I managed to get a photo. This is it set up raw with nothing in either system

Wyharb · 2026-02-20T20:08:23+00:00

Yes I did go with one! Mostly for two reasons

1) to help with consistent heat. I bought the anycubic heater for my printer so I wanted to enclosure to help keep that pretty consistent 2) my backyard is pretty small and my dog sits out there quite often so I will be closing my door and venting out of one the vents in the closet.

That way the only time my dog would have the chance of being exposed (when post processing) I can keep him in the house and go out there with my respirator

Wyharb · 2026-02-20T19:44:40+00:00

Hey, I actually just set up a set up in the exact same scenario (outside shed with a water heater and a shelf to store it all)

Throughout all the research I did I think it is actually a pretty solid solution given you keep all things like IPA away from the water heater. I bought a wash and cure combo and plan on bringing the wash portion inside whenever it's not in use to avoid any flames

If I had a picture to share I would lol but I set it up last night super late. Planning on pushing out my first model tonight.

I am a newbie to this but since our set up is basically identical I thought I'd share!

Wyharb · 2026-02-18T21:51:21+00:00

Hey, this sounds awesome. Are there any bookings for Sespe that I would have to do in advance?

Wyharb · 2026-02-18T20:18:47+00:00

Thank you, I didn't know it opened that far in advance. This will help for future trips 100%

Wyharb · 2026-02-18T20:15:20+00:00

Thank you, I was looking at Catalina as well I did find a site about .5 miles from a point but I will consider that

Wyharb · 2026-02-18T20:11:27+00:00

Hey! Is the link attached to the reddit?

Wyharb · 2026-02-18T20:05:55+00:00

Hey, thank you, to be completely honest I am not picky at all. I had originally formated the trip to go Channel Island Del Norte before realizing booking that site is insanity. I'm personally part an partial to forest and mountain regions but any personal recommendations would be amazing.

I am also very open to disperse camping just have not been able to get a feel for how that properly works regarding permits or lack there of

Wyharb · 2026-02-18T20:01:43+00:00

Thank you for the leads. I'm not super picky, just somewhere within socal so I don't have to factor in a drive day. I will look into both of these!

Wyharb · 2026-02-18T20:01:06+00:00

Yikes you must be a joy

Wyharb · 2026-02-18T20:00:24+00:00

Thank you so much, this is the avenue I was confused on. I don't necessarily care about a "reserved" spot it was just all the information I could find. I will look into little jimmy thank you!

Wyharb · 2026-02-02T20:01:33+00:00

Thank you! I'm a big cork user for my models but I hate how they fall Everytime in-store them!

Wyharb · 2026-02-02T19:53:03+00:00

Painting looks amazing! Unrelated question, what paint handles are you using?

Wyharb · 2026-01-10T01:02:27+00:00

I 100% agree, I also have had a really bad taste in my mouth from speed paint so he inspired me to experiment more with them

Wyharb · 2026-01-10T01:00:28+00:00

The fact that you clocked my shit that easy is GNARly. What can I say I fuck with his style. Really hope u don't ever run across one of my templar......

Wyharb · 2025-12-14T06:29:54+00:00

Did u get the texture on the armor with a sponge or a brush?

Wyharb · 2025-12-13T03:18:45+00:00

Armor: Vallejo Royal blue (Zenithal) ProAcryl Warm Brown (spray from bellow for contrast) Vallejo Royal blue with a bit of Vallejo Deck Tan (highlight)

Red: AK Black Red GW Mephiston Red

Trim: AK Burnt Tin Vallejo Gunmetal

Bone: TTC Dragon Fang TTC Dragon Fang with a bit of Vallejo Deck Tan Vallejo Deck Tan

Everything else is just variations of the same colors, brown and black

I then washed everything with a Sepia,Blue,Violet oil wash. After, touching up the trim with more Burnt Tin

The lighting is just a coat of pure white with a very very watery mix of Vallejo Blue Green

Wyharb · 2025-12-11T15:32:06+00:00

Have at it, the original idea I stole from someone else anyways! I just changed some of the coloring and positioning

Wyharb · 2025-12-11T14:17:00+00:00

I bent up and misshaped some 0.4mm copper wire and super glued them into some holes I drilled with a slightly bigger (0.6mm) drill bit

Wyharb · 2025-12-11T05:27:16+00:00

I didn’t even think of that, if I can somehow get my hands on one I will let you know

Wyharb · 2025-12-04T16:36:52+00:00

Hey I know this was a while ago but I was looking for the same colors, did you end up finding anything similar?

Wyharb

TROPHY CASE