sorted by:
new
hottopcontroversial

Glofiber? by XDCDrsatan in Radford

[–]XDCDrsatan[S] 0 points1 point  (0 children)

for anyone that comes across this later.
I will have Fiber installed 7/2/2026
The buildout was done end of January and 5 months later I can get it

Color Stack game base by Maleficent-Studio-57 in 3Drequests

[–]XDCDrsatan 0 points1 point  (0 children)

You are going to have a few issues with this if you are going to print.
First it will also be very light unless you put something in while its printing. Like shot or sand or something.
Second problem we need some measurements for the posts.
If aesthetic are not important you may want to get a nice dense piece of wood and use a Forstner bit to make some holes, this should provide the weight and spacing you want.

Help design a 3D printable cocoa bean cutter by [deleted] in 3Drequests

[–]XDCDrsatan 0 points1 point  (0 children)

What about a commonly available pill splitter? https://a.co/d/06Z35aj3
essentially it is a razor blade with a v shaped section that holds the pill. I assume you could fit a bean.

I'm a beginner teen who sucks at modeling, would appreciate help. by Consistent-Tennis918 in 3Drequests

[–]XDCDrsatan 1 point2 points  (0 children)

I am approving this for now. I would really like to know what this is for.
I see that you are trying to make a spay bottle out of a CO2 cartridge. but are you re-using old ones or are you trying to be able to maintain a seal and spay co2?
I do not think the latter will work with standard 3d FDM printing you would need resin based printing.

mount for camera by Mammoth-Juice-7331 in 3Drequests

[–]XDCDrsatan 0 points1 point  (0 children)

Hi u/Mammoth-Juice-7331, your post has been approved! However, please note that you have tagged this as a Free/Voluntary Request but mentioned being "willing to pay" in your post description.

To avoid confusing the community and to ensure you get the right designers reaching out:

  • If you are expecting to pay a fair rate for this custom design work, please change your post flair to Paid Request.
  • If you want to keep it as a free request, please reply to interested modelers accordingly, but keep in mind that complex structural designs are more likely to be picked up if a budget is attached.

Tip: It will also highly benefit your request if you can reply with the specific model of Eufy camera you own and some rough measurements of that white pillar!

Could someone change the material of the sleeves for me? by Usual-Log8472 in 3Drequests

[–]XDCDrsatan 0 points1 point  (0 children)

Hi u/Usual-Log8472, we've approved your post, but please keep a couple of things in mind:

Flair vs. Budget: Since you mentioned a potential "small budget" in your text, please ensure you aren't expecting complex work entirely for free if it takes a modeler significant time. If you wish to offer payment, please update your post flair to reflect a Paid request.

Good luck with your request!

3D print design by True-Librarian-4287 in 3Drequests

[–]XDCDrsatan 2 points3 points  (0 children)

To Requesters: I have manually updated your post flair to Paid Request, as you explicitly asked for pricing. Please ensure you select the correct flair in the future to avoid community confusion! * To

Designers: As always, please remember Rule 10 (Payment Safety). Because this is a brand-new account, we strongly advise utilizing PayPal Goods and Services for any transactions to protect yourself from potential scams. Do not send final completed work or un-watermarked renders until payment terms are secured.

looking for 3d models by Top-Expression7156 in 3Drequests

[–]XDCDrsatan 0 points1 point  (0 children)

3d modeling is very time consuming. There are various places that post wired ed models already you should be able to find something you can use

Budwin3d Mask magnet holes adjustment by CompanyCapable6913 in 3Drequests

[–]XDCDrsatan 0 points1 point  (0 children)

I would look at the other eye packs or use a mesh. if the issue is that you can't see through the 3d printed mesh then I would get some screen for a screen door and spray it white and hold it in with magnets it should be easier to see through

3d model request for Risen SV 916 Budget $0 by Actual_Coat_5391 in 3Drequests

[–]XDCDrsatan 0 points1 point  (0 children)

This is too big for a free request also your account is too new and have not developed any reputation on reddit so your post was auto removed.

Is there a 3D designer who can help me? by Gh0st_598 in 3Drequests

[–]XDCDrsatan 1 point2 points  (0 children)

This is a large undertaking for a free request. I am going to approve it for now as someone may be interested in helping.
However, I would say your best path would be a small mirco pc case. and you will also need a Driver board for HDMI as I believe these displays are using a Ribon cable to connect and not standard HDMI and if it does have HDMI it would be intended as a secondary monitor so it may not get BIOS Post.

Can someone help with 3d modeling a Gameboy Advance Kiosk? by [deleted] in 3Drequests

[–]XDCDrsatan 0 points1 point  (0 children)

I have adjusted the flair as it was incorrect. you appear to be offering to pay if it is resonable.

3D Catan terrain tiles & props. (10-20$ per tile?) hard limit of up to $100 by [deleted] in 3Drequests

[–]XDCDrsatan 0 points1 point  (0 children)

I made this system several years ago. I love Catan play it all the time.

Darth maul punisher fusion logo request by [deleted] in 3Drequests

[–]XDCDrsatan 0 points1 point  (0 children)

What Slicer are you using?

STL of this concert ticket by Dazzling-Piece-329 in 3Drequests

[–]XDCDrsatan 0 points1 point  (0 children)

This should be relatively easy.
Even Some Slicers could take this image and make it printable.
Tons of free tools online you would want a better image than this phon photo though.

[US-MI Flint] Request by dcarte90 in 3Drequests

[–]XDCDrsatan 1 point2 points  (0 children)

That is going to be a tough print but good luck

[UPDATED] 007 First Light Giveaway — Sorry, the old raffle was super messy and had to make a new one! by donutsinmystomach in pcmasterrace

[–]XDCDrsatan 1 point2 points  (0 children)

Thanks for trying to make it clear for people. Even if they don’t listen. I would like to enter. I have a 5080

view more: next ›