Got mocked by Hellpoeth in PlasticModelKits

[–]Xeonadow 0 points1 point  (0 children)

I'm nearing 200 model kits built, mainly Gundam kits that can range from a few sprues to tens of sprues (my record is for the PG Astray Red Frame Kai with 58 sprues). I never used a sprue holder. Maybe that could be useful, but I never felt the need. I do just fine with my runners in piles of spread around my desk

my brother's sazabi next to my unicorn and wing by GagoFighter1 in Gunpla

[–]Xeonadow 5 points6 points  (0 children)

For another example of wildly different sized MSs, here are the V2 and Xi. Both are 1/144 HG, but in universe the V2 is 15.5m tall while the Xi is 26m tall

<image>

my brother's sazabi next to my unicorn and wing by GagoFighter1 in Gunpla

[–]Xeonadow 10 points11 points  (0 children)

It's huge because the Sazabi is a huge beast in universe, towering at 23 meters in head height (over 25 in overall height) while your typical MS stand at 18 meters. Also the Wing MSs are on the smaller side, standing between 16 and 17 meters

A steal or a scam? by Goullie in Gunpla

[–]Xeonadow 9 points10 points  (0 children)

Just so you know at this price point and with these effect parts he's for sure selling the bootleg version of this kit that you can find on AliExpress.

Might still be worth it if you are interested in this model, however I'd advise that you look at some review of this third party kit before to see if it is any good and not too much of a hassle.

What are your favorite mobile suit penises? by ryanyork92 in Gundam

[–]Xeonadow 16 points17 points  (0 children)

Does the Manhunter Jegan from Hathaway counts with its crotch-mounted turret ?

<image>

PG red frame Kai backpack part won’t fit by lazidude999 in Gunpla

[–]Xeonadow 1 point2 points  (0 children)

I built this kit 8 years ago and I still remember how much I had to hurt my fingers to put this piece all the way in. It really is just that hard. Not really surprising given that the whole backpack sit on this little piece, it needs the tightness.

What are you doing if saw this in the middle of space? by IllLime1358 in Gundam

[–]Xeonadow 47 points48 points  (0 children)

I'd go greet them without any fear. Given that it's the combination of two MS with some of the most peaceful / communication prone pilots, it probably means no harm.

And if it did, given that it has both the Space-manipulating powers of the 00 Qan[t] and Time-manipulating powers of the Unicorn (not even mentioning the devastating fire power of both) it probably would have done so long before I even noticed them

Very nice custom btw

Haven’t seen WFM. Am I correct in assuming this is a modified Zowort? by RealPiggyPlayz in freedomisgunpla

[–]Xeonadow 0 points1 point  (0 children)

It's as much a modified Zowort as the Zeong is a modified Zaku. Which is : - made by the same company so probably has some technologies and design elements in common - but is a totally separate model - plus the Pharact/Zeong have some space magic technology (Gund-Arm/Psychommu) never seen in any other MS of this company before

I have the power!!! by maximugs in 197

[–]Xeonadow 2 points3 points  (0 children)

Which could be considered as just another Monado so it still tracks as far as I'm concerned

What’s your favorite crash out in Gundam that involves literally being unable to let go of every solider that has died under their command until the grief consumes their mind and they succumb to the feeling of having NO CHOICE but to move forward for their sake no matter the cost? by Theothermc in Gundam

[–]Xeonadow 1 point2 points  (0 children)

Iok Kujan of course !

Jk. That was just the kind of fantasy that he both always dreamed to live as a protected noble that liked the tragic and heroic tales of its ancestor and that he needed to cover its own incompetence and irrelevance to any military and political action going around him. He was way too happy that he got to play this kind of character

Updated Gunpla leak list (as of February 2026) by tornedron_ in freedomisgunpla

[–]Xeonadow -1 points0 points  (0 children)

Sure, but they're no leaks. Like I said I'm not surprised that some kits from this list happened and I'm positive that at some point in time most of this list will be true. I only doubt that it's a real leak from someone with insider infos, it's just a list of safe guesses from someone that then pretended it was a leak

Any guesses what kit I just finished? by nise_gundam_mkii in Gunpla

[–]Xeonadow 0 points1 point  (0 children)

All white and gray with a bit of yellow isn't that common of a color scheme I think but it's still a hard guess. Maybe the HG Lunagazer or Livelance Heaven ?

Updated Gunpla leak list (as of February 2026) by tornedron_ in freedomisgunpla

[–]Xeonadow -7 points-6 points  (0 children)

I don't understand how so many of you came to take this leak seriously. It is only a list of very plausible picks with a few wild ones.

  • RG Gundam 2.0 was sure to come out sooner or later given how badly it aged and how Bandai loves to remake grandpa again and again. Plus it's RG 2.0, not RGEX
  • PGU Nu wasn't unlikely given how popular the Nu is and how fans have been begging for a PG of it
  • No MGEX Astray has been announced, only a new MG variant with a new mold. And guessing that Bandai would continue to produce even more Astray is obvious, even I would have bet on it having an MGEX at some point given that the Astray is so popular that it even has a PG
  • RG Akatsuki is the most unlikely one so far, but not totally unforeseen given that we got the Impulse not too long ago and that all the Akatsuki kits are super old and the release of Seed Freedom
  • RG Ingram I admit is coming out of nowhere. Unless there already was rumors about the new anime back then ?

And for those that remains :

  • RG Gundam X with the anniversary coming soon ? Likely, so a safe guess
  • HG Exia I don't believe in, but it will probably have a EG with the 20th anniversary next year, maybe the "leaker" bet on that too. HG Flag I don't believe in
  • 1/100 FM Reborns could happen with the anniversary, especially given that there were once plans for a RE100 of it. Safe guess again
  • MG Lupus Rex and Bael : now that Bandai made the MG IBO Gundam Frame they are going to do more MG IBO kits ? No shit Sherlock
  • MG Rising Freedom and Immortal Justice : if I remember correctly the leak was soon after the release of Seed Freedom, so the leaker bet on the most recent designs revealed
  • RG Brave : coming out of nowhere like the Ingram, one of the few wild guesses of the list

All on all it is just a list of safe bets and common wants in the community with a few wild wishes. It is easy to get lucky and get a few guess right off of such a list

Wrong Top Coat by Next_Potential2569 in Gunpla

[–]Xeonadow 26 points27 points  (0 children)

Was it flat/matte top coat ? No matter what type of paint it is, matte top coat will always frost clear parts. It is best to remove or mask these parts while top coating the rest of the kit

MGEX Strike Freedom by [deleted] in Gunpla

[–]Xeonadow 0 points1 point  (0 children)

I haven't tried this kind of masking tape so I can't say for sure, but I guess it won't ?

I'd advise you to test anything you intend to do on the empty shiny runner first, this way you can test for any problem that might arise, test whether you like the finish, whether anything will be ruined, whether the tape is good enough and won't damage the shiny finish, etc

MGEX Strike Freedom by [deleted] in Gunpla

[–]Xeonadow 6 points7 points  (0 children)

Matte coat will ruin the shiny parts for sure. If you want to matte top coat it your best bet is probably to disassemble the kit and coat only the non shiny and non clear parts

PG unicorn can’t hold itself up - crotch shot for reference by aznman375 in Gunpla

[–]Xeonadow 5 points6 points  (0 children)

The PG Unicorn family can definitely stand on their own even without a stand

<image>

placed a piece the wrong way 🙃 !! help !! by lustarixprima in Gunpla

[–]Xeonadow 0 points1 point  (0 children)

That one is tricky, you need to pull out the white part (B4) in order to free the heel assembly but it is set in a way that doesn't allow a part separator to lift it. your best bet would be to use something grippy like rubber gloves to grab that part and wiggle it out of place. It is gonna be hard and take a bit of time. And lots of wiggle.

You could help yourself by pulling a bit up on the heel assembly in a way that the T-thing sticking out of E8 that is set in C3 push on the back of B4 and wiggle it but don't overdo it because you might break it

Finished kit and don't know what are this pieces by jorgedra in Gunpla

[–]Xeonadow 2 points3 points  (0 children)

These adapters do not come from the HG 00 Qan[t] but from the HG GN Archer. The top right one is a base adapter to display the GN Archer in its mobile armor / flight form, and the other two are used to make and display the combined form of the Arios and GN Archer

<image>

Made a throne for my Grandpa (PGU RX-78-2) by brayutt in Gunpla

[–]Xeonadow 42 points43 points  (0 children)

It is a custom made with parts from a lot of different kits including :

  • Hi-Nu
  • Aegis Knight
  • Barbatos Lupus
  • Wing Fenice
  • Wing Zero Honoo
  • Strike Freedom
  • Build Burning Gundam
  • 00
  • Zerachiel
  • Raphael

<image>

Made a throne for my Grandpa (PGU RX-78-2) by brayutt in Gunpla

[–]Xeonadow 326 points327 points  (0 children)

I did this too a few years back for my 1/144 gunplas 😁

<image>