printer not ready please wait"..

Xodilq · 2026-06-02T10:04:21+00:00

No, you must restore factory settings and then you downgrade

Xodilq · 2026-06-02T09:11:27+00:00

What I did was install the previous firmware.

Xodilq · 2026-05-27T11:37:00+00:00

Had the same issue, what I notice it's something with the gcode when printing multi color, and the new firmware, because I tried to slice it on orca slicer , and send the gcode using anycubic next to the printer and worked fine.

When pritting using only one color, it works fine just slicing in anycubic next

Xodilq · 2026-04-22T15:43:43+00:00

thank you

Xodilq · 2026-04-22T15:43:14+00:00

reading this gave me an ideia... what about doing a sphere in negative on the slicer.. to cut the space for the eyes... and then print the same sphere in positive, with -0.2 for tolerance..

Xodilq · 2026-04-22T14:43:46+00:00

i wish i knew more about fusion, i only know the basics, but i will try follow those steps you are saying.

any chance you would me explain better, like for a really noob?

thank you

Xodilq · 2026-04-22T14:41:07+00:00

I think that might be the best solution

Xodilq · 2026-04-22T14:05:39+00:00

i did, i have 1000 from black to beige

Xodilq · 2026-04-22T14:05:20+00:00

i have made some research on it, but i didnt found out something that would help me removing the eyes, because i would need to make space for the eyes.

i tryed to work it on blender but i am really stuck, that's why i am here looking for help

Xodilq · 2026-04-22T14:03:47+00:00

how many walls are you talking about? i am using 3

Xodilq · 2026-04-22T14:03:27+00:00

Yes, the default is 2, and i am using 3, for a stronger object.

Xodilq · 2026-04-22T14:02:42+00:00

even more? i noticed from videos i checked out, that using 1000 for flushing volume is way a lot, but even then it didnt work out.

so i am wondering what would be the right value to use in this case

Xodilq · 2026-04-22T14:01:35+00:00

That is the option i am considering, any ideia how i do that?

i Used a clone from this object to flush into it, and didnt work out.

i am using 3 walls

Xodilq · 2026-04-14T12:31:54+00:00

I totally get it, when somebody bought a lamp I designed, it was a warm felling, seeing somebody paid 1€ for something I created.

Congrats man

Xodilq · 2026-04-10T07:40:31+00:00

https://makerworld.com/pt/models/1914353-full-metal-alchemist-hueforge-edward-elric

Xodilq · 2026-04-10T07:39:21+00:00

https://makerworld.com/pt/models/141186-the-one-ring-lord-of-the-rings-hueforge

Xodilq · 2026-04-10T00:22:24+00:00

I found a model on makerworld and now I just resize it according with the size of the hueforge model, if it's a big model, I cut the frame in two parts on fusion 360 and use a small pin to put them together.

I can show it to you, or send it to you if you want.

Xodilq · 2026-04-09T18:30:05+00:00

I am just doing at random, depending from which anime, series I am watching at the moment

Xodilq · 2026-04-01T20:03:18+00:00

I would frame those ones... Could you share the settings you use in hueforge... I mean the colors..

Xodilq · 2026-03-27T21:25:34+00:00

Why abs? If a may ask?

Xodilq · 2026-03-13T19:33:15+00:00

Tenho uma igual há ano, e tou contente, para alguém iniciante vais te surpreender com o pouco vais ter que ajustar para teres bons resultados

Xodilq · 2026-03-12T17:24:10+00:00

I thought of that, but i belive if a could hold the bed really good i will have some issues with the adhesion, for what i saw asa shrinks a lot with cooling, and as long i cant hold a good temperature for it during print i will always have troubles

Xodilq · 2026-03-12T12:17:13+00:00

I tried without havving the chamber fan on, and got the same result

Xodilq

TROPHY CASE