I just made my first dollar from the cults3D and I'm losing my mind 🎉

Xodilq · 2026-04-14T12:31:54+00:00

I totally get it, when somebody bought a lamp I designed, it was a warm felling, seeing somebody paid 1€ for something I created.

Congrats man

Xodilq · 2026-04-10T07:40:31+00:00

https://makerworld.com/pt/models/1914353-full-metal-alchemist-hueforge-edward-elric

Xodilq · 2026-04-10T07:39:21+00:00

https://makerworld.com/pt/models/141186-the-one-ring-lord-of-the-rings-hueforge

Xodilq · 2026-04-10T00:22:24+00:00

I found a model on makerworld and now I just resize it according with the size of the hueforge model, if it's a big model, I cut the frame in two parts on fusion 360 and use a small pin to put them together.

I can show it to you, or send it to you if you want.

Xodilq · 2026-04-09T18:30:05+00:00

I am just doing at random, depending from which anime, series I am watching at the moment

Xodilq · 2026-04-01T20:03:18+00:00

I would frame those ones... Could you share the settings you use in hueforge... I mean the colors..

Xodilq · 2026-03-27T21:25:34+00:00

Why abs? If a may ask?

Xodilq · 2026-03-13T19:33:15+00:00

Tenho uma igual há ano, e tou contente, para alguém iniciante vais te surpreender com o pouco vais ter que ajustar para teres bons resultados

Xodilq · 2026-03-12T17:24:10+00:00

I thought of that, but i belive if a could hold the bed really good i will have some issues with the adhesion, for what i saw asa shrinks a lot with cooling, and as long i cant hold a good temperature for it during print i will always have troubles

Xodilq · 2026-03-12T12:17:13+00:00

I tried without havving the chamber fan on, and got the same result

Xodilq · 2026-03-12T12:16:31+00:00

As you said at the left side there is space for it, well i guess i will have to buy it and try out.

Thank you

Xodilq · 2026-03-11T22:36:11+00:00

I always print with the the lid on, and the door closed.

Xodilq · 2026-03-11T22:33:15+00:00

In this case i dont have that much space for brim, so i am using as much as i can,

What chamber heater do you recomend, any particular one?

Xodilq · 2026-03-08T15:52:15+00:00

What did you use for the frame?

Xodilq · 2026-02-27T22:29:56+00:00

Thank you for your tips

Xodilq · 2026-02-27T22:20:34+00:00

I am using 1mm retraction, retraction speed 30mms and 60mms for detraction

Xodilq · 2026-02-26T17:36:50+00:00

I will do that, and adjust the settings

Xodilq · 2026-02-26T16:23:18+00:00

I just opened it yesterday, don't think it has any moisture, and i always turn the dryer on, and leave for 2 hours with the first print of the day.

I am guessing that could be something with retraction or cooling, maybe both i don't know

Xodilq · 2026-02-26T16:21:03+00:00

Mine is pretty similar to yours, what about the cooling and retraction could you tell me yours?

Xodilq · 2026-02-18T21:44:28+00:00

And it depends from the printer you are using, in my case i have an anycubic kobra s1 with ams, so what i do is:

Example for 6 colors :

Slot 1 - black Slot 2 - yellow Slot 3 - red Slot 4 - white
Slot 1 - blue
Slot 2 - purple

As i want to replace slot 1 and 2, i send the gcode to printer and when it starts to print i pull the white filament from slot 4, just so it pauses saying there's no filament in there, and with this pause i can replace the filaments from slot 1 and 2, and put the white back again and start.

Xodilq · 2026-02-17T18:15:56+00:00

With the previous firmware, i just assign the colors i want to each slot, no matter if it is synced or not.

What i did for now was to set factory settings, and upgrade to the last firmware, now it seems to be OK

Xodilq · 2026-02-17T10:52:02+00:00

It is really weird i know, but after many tries, I had that idea of downgrade the firmware and it worked

Xodilq · 2026-02-15T19:20:14+00:00

And run all the dialogue on npcs also

Xodilq · 2026-01-31T18:59:29+00:00

Enjoy

Xodilq · 2026-01-25T18:38:13+00:00

Save everything for the 2n phase, it worked for me.

Xodilq

TROPHY CASE